... such as wool, polystyrene, wood fiber, cotton denim, etc. This article presents the modelling and simulation results on performance of microchannels in a typical building wall to provide dynamic thermal resistance for the building envelop. The simulations are performed for aluminum microchannels with air...

... of electrical energy, which is more than 1.5 times the energy requirement per cycle for the SOLO II float. modeling simulation energy conversion/systems alternative energy sources Proceedings of the ASME 2023 17th International Conference on Energy Sustainability ES2023 July 10-12, 2023, Washington...

... in dispatch decisions. Finally, we analyze the relationship between operational parameters of the battery and the capacity fade. energy storage energy systems analysis optimization and control simulation Proceedings of the ASME 2021 15th International Conference on Energy Sustainability ES2021...

... but still detailed simulation of cavity receiver configurations making it suitable for use in an annual-hourly time series simulation tool such as SAM. solar tower solar receiver radiation simulation optics Proceedings of the ASME 2021 15th International Conference on Energy Sustainability...

... receiver thermal efficiency wind simulation IMPROVING NEXT-GENERATION FALLING PARTICLE RECEIVER DESIGNS SUBJECT TO ANTICIPATED OPERATING CONDITIONS Brantley Mills, Reid Shaeffer, Lindsey Yue, and Clifford K. Ho Sandia National Laboratories Albuquerque, New Mexico, 87185-0836, USA bramill@sandia.gov...

... and not from varying effects with wind. Finally, the model was used to demonstrate that receiver efficiencies of 90% were achievable under the assumption that the effect of wind/advective losses were mitigated. concentrating solar power falling particle receiver thermal efficiency wind simulation...

... driven by flat-type solar collectors with three different configurations of glaze: 1) single glazed cover; 2) double glazed cover and 3) transparent insulation material (TIM) cover. The simulation results show that the higher the solar collector temperature is, the better the coefficient of performance...

... loads of the Almono site. KEYWORDS: CCHP, District Energy Supply, Simulation, Energyplus Copyright © 2009 by ASME1 Proceedings of the ASME 2009 3rd International Conference of Energy Sustainability ES2009 July 19-23, 2009, San Francisco, California, USA ES2009-90323 Copyright © 2009 by ASME 2 1...

... 7$8 9 9 , N 9 O BC 7C8 4 , ( , CB% 7#8 K 4 P D N P D N 7)8 K9 , 2CC Copyright © 2009 by ASME6 solar energy porous medial simulation In this paper, heat transfer and flow in a composite solar wall with porous absorber has...

... to cool or heat the hydride bed based on whether hydrogen is absorbed or desorbed. The total weight of the system includes hydrogen storage material, heat exchanger tubes and associated heat transfer media, porous sintered filters and the cylindrical outer container. Systematic simulation of the heat...

... 05 10 2010 The transient thermal behavior of two solar receiver-reactors for hydrogen production has been modeled using Modelica/Dymola. The simulated reactors are dedicated to carry out the same chemical reactions but represent two different development stages of the project HYDROSOL...

... the performance features of CTL and other coal-to-fuel systems based on different gasification technologies. The target products are Fischer-Tropsch (F-T) crude and synthesis natural gas (SNG). Two types of entrained-flow gasifier based coal-to-fuel systems are simulated and their performance features...

... collectors are installed, solar cooling systems can be profitably employed during winter. In the present work a code has been implemented for the simulation and the design optimization of combined solar heating and cooling systems. The following system layout has been considered: in warm months the cooling...