This paper presents the results of studying friction stir butt welding of commercial pure copper plates using both experimental and finite element analysis methods. The experimental work consisted of making a butt joint to 4 mm copper plates using friction stir welding process at constant rotational speed of the pin tool to evaluate the effect of welding speed on weld quality. Weld quality was evaluated by the joints tensile strength, micro hardness, as well as evolution of the developed microstructure across the welding zone. A coupled Eulerian Lagrangian (CEL) finite element (FE) model had been developed to simulate the friction stir butt welding process, and predict the temperature distributions across the weld, as well as developed welding stresses. Axial load and temperature measurements results from the experiments have been used to validate the finite element model.
Friction Stir Butt Welding of Commercially Pure Copper Plates
- Views Icon Views
- Share Icon Share
- Search Site
Karrar, G, Shuaib, AN, Al-Badour, FA, Merah, N, & Mahgoub, AK. "Friction Stir Butt Welding of Commercially Pure Copper Plates." Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Montreal, Quebec, Canada. November 14–20, 2014. V02AT02A052. ASME. https://doi.org/10.1115/IMECE2014-38378
Download citation file: