A jet electrodeposition device was carried out to prepare Cu-Al2O3 nanocomposite coatings. The influence of the concentration of Al2O3 in the electrolyte and parameters, such as cathodic current density, the electrolyte temperature as well as the electrolyte jet velocity, on the content of the Al2O3 in the deposite were investigated. The coatings ingredient and microstructure was measured by the scanning electron microscope (SEM) with energy dispersive analyzer system (EDX), the microhardness tests were conducted on an microhardness tester. The results show that the jet electrodeposition can fine crystalline particles. The copper deposited layers have nanocrystalline microstructure with grain size of about 50nm. The amount of Al2O3 in composites first increased and then decreased with an increase in the concentration of Al2O3, current density, temperature and jet velocity. The composite with optimum atomic percent of Al2O3 (14.4 at%) can be obtained at the concentration of 30 g/l, cathodic current densities 300 A/dm2, temperature 30°C, and electrolyte jet velocity 8 m/s. The addition of Al2O3 in copper increases the microhardness of the electrodeposited coatings.
- Nanotechnology Institute
Jet Electrodeposited Cu-Al2O3 Nanocomposite Coatings
- Views Icon Views
- Share Icon Share
- Search Site
Chen, J, Huang, Y, Liu, Z, & Tian, Z. "Jet Electrodeposited Cu-Al2O3 Nanocomposite Coatings." Proceedings of the 2007 First International Conference on Integration and Commercialization of Micro and Nanosystems. First International Conference on Integration and Commercialization of Micro and Nanosystems, Parts A and B. Sanya, Hainan, China. January 10–13, 2007. pp. 1227-1230. ASME. https://doi.org/10.1115/MNC2007-21103
Download citation file: