A general analytical solution for the annular problem with a point heat source is provided in this paper. Based upon the method of analytical continuation and the technique of Fourier series expansions, the series solutions of the temperature and stress functions are expressed in complex explicit form. Single-valuedness of complex functions in the doubly connected region has been examined for both the stress-free and displacement-free boundary conditions. The dilatation stress in the annulus due to the application of a point heat source is discussed and shown in graphic form. [S0021-8936(00)02803-8]
On the General Solutions for Annular Problems With a Point Heat Source
Contributed by the Applied Mechanics Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF APPLIED MECHANICS. Manuscript received by the ASME Applied Mechanics Division, July 28, 1998; final revision, Jan. 29, 1999. Associate Technical Editor: J. R. Barber. Discussion on the paper should be addressed to the Technical Editor, Professor Lewis T. Wheeler, Department of Mechanical Engineering, University of Houston, Houston, TX 77204-4792, and will be accepted until four months after final publication of the paper itself in the ASME JOURNAL OF APPLIED MECHANICS.
- Views Icon Views
- Share Icon Share
- Search Site
Chao, C. K., and Tan, C. J. (January 29, 1999). "On the General Solutions for Annular Problems With a Point Heat Source ." ASME. J. Appl. Mech. September 2000; 67(3): 511–518. https://doi.org/10.1115/1.1312804
Download citation file: