During a gun firing, the flow around a projectile will be developing and changing. In particular, the flow around the projectile is disturbed significantly when the projectile overtakes the muzzle flow. Furthermore, the projectile body pressure will also change substantially. Therefore, the shot ejection process has an important effect on the shot accuracy. The maximum projectile velocity is one of the most important design goals of the interior ballistic process and also is the initial condition for the exterior ballistic process. Most researchers take the muzzle velocity as the maximum projectile velocity; actually, after the projectile exits the muzzle, the projectile velocity will increase further due to the influence of the muzzle flow. Most investigations of the muzzle flow focused on the blowout of the high-pressure jet flow after the projectile exited the muzzle. The interior ballistic process was ignored or simply assumed in most investigations. Also, the mutual influence between the moving projectile and the muzzle flow was often neglected. Actually, a precursor shock flow near the muzzle is formed before the projectile exits. This precursor muzzle flow has an important influence on the trajectory of the projectile, especially, for the prevalent trend of gun systems including large caliber cannon and multiple launch gun systems. For these reasons, the interior ballistic process was coupled with the simulation of the flow near the muzzle. A hybrid structured-unstructured gridding method was used to simulate the process from the projectile engraving to the gas ejection phase, accounting for the moving projectile. The simulation results show that the projectile muzzle velocity was 893.99 m/s but the maximum velocity was 899.28 m/s. The projectile velocity increased rapidly to up to 0.8 ms after muzzle exit; thereafter, the projectile velocity increased slowly before reaching its maximum value. The maximum Mach number of the effluent gas increased to 6.83 and the breech pressure decreased to 21.5 MPa at 1.8 ms after the projectile exited the muzzle. The formation and development of the muzzle flow field was highly complex and transient. The analysis of the projectile velocity was conducted during the interior ballistic after-effect period. The predicted muzzle velocity and maximum barrel pressure are in good agreement with those measured in gun firings. Results of the numerical simulation and analysis are helpful to understand and master the aerodynamic process of gun system launching and provide significant guidance for research into shot accuracy and muzzle brake design.
Skip Nav Destination
Article navigation
September 2010
Research Papers
Aerodynamic Analysis of Projectile in Gun System Firing Process
Wei Yu,
Wei Yu
School of Power Engineering,
Nanjing University of Science and Technology
, Nanjing 210094, China
Search for other works by this author on:
Xiaobing Zhang
Xiaobing Zhang
School of Power Engineering,
Nanjing University of Science and Technology
, Nanjing 210094, China
Search for other works by this author on:
Wei Yu
School of Power Engineering,
Nanjing University of Science and Technology
, Nanjing 210094, China
Xiaobing Zhang
School of Power Engineering,
Nanjing University of Science and Technology
, Nanjing 210094, ChinaJ. Appl. Mech. Sep 2010, 77(5): 051406 (8 pages)
Published Online: June 10, 2010
Article history
Received:
January 6, 2010
Revised:
March 16, 2010
Posted:
April 8, 2010
Published:
June 10, 2010
Online:
June 10, 2010
Citation
Yu, W., and Zhang, X. (June 10, 2010). "Aerodynamic Analysis of Projectile in Gun System Firing Process." ASME. J. Appl. Mech. September 2010; 77(5): 051406. https://doi.org/10.1115/1.4001559
Download citation file:
Get Email Alerts
Related Articles
Experimental Study and Numerical Simulation of Propellant Ignition and Combustion for Cased Telescoped Ammunition in Chamber
J. Appl. Mech (September,2010)
Experimental and Numerical Investigations on Traveling Charge Gun Using Liquid Fuels
J. Appl. Mech (September,2011)
The Conception of the Segmented Kinetic Energy Penetrators for Tank Guns
J. Appl. Mech (September,2010)
Optical Observation of the Supercavitation Induced by High-Speed Water Entry
J. Fluids Eng (December,2000)
Related Proceedings Papers
Related Chapters
Cavitation Induction by Projectile Impacting on a Water Jet
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Optimal Shape Design Approach and Influence on the Projectile Vertices with Respect to Some Objective Function
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Performance Testing of Combined Cycle Power Plant
Handbook for Cogeneration and Combined Cycle Power Plants, Second Edition