This study presents a new approach for flow analysis of magnetorheological (MR) fluids through channels with various surface topologies. Based on an experimental study an analytical method is developed to predict the pressure loss of a MR fluid as a function of the applied magnetic field strength, volumetric flow rate, and surface topology, without utilizing the concept of shear yield stress. A channel flow rheometer with interchangeable channel walls is built to demonstrate that the pressure loss across the MR fluid flow channel is significantly affected by the channel surface properties. Based on the experimental study it is concluded that a unique shear yield stress cannot be defined for a given MR fluid, since its pressure drop depends on the surface topology of the device. Therefore, a relation for nondimensional friction factor associated with MR fluid channel flow is developed in terms of a modified Mason number and dimensionless surface topology parameters. Using the nondimensional model, the pressure loss for various magnetic fields and volumetric flow rates can be represented by a single master curve for a given channel surface topology without the assumption of a constitutive model for MR fluids.
Skip Nav Destination
Article navigation
July 2011
Research Papers
A Unified Approach for Flow Analysis of Magnetorheological Fluids
Barkan Kavlicoglu,
Barkan Kavlicoglu
Senior Engineer
Advanced Materials and Devices, Inc.
, Reno, NV 89502
Search for other works by this author on:
Xiaojie Wang
Xiaojie Wang
Research Assistant Professor
Department of Mechanical Engineering,
University of Nevada, Reno
, Reno, NV 89557
Search for other works by this author on:
Barkan Kavlicoglu
Senior Engineer
Advanced Materials and Devices, Inc.
, Reno, NV 89502
Faramarz Gordaninejad
Professor
Xiaojie Wang
Research Assistant Professor
Department of Mechanical Engineering,
University of Nevada, Reno
, Reno, NV 89557J. Appl. Mech. Jul 2011, 78(4): 041008 (10 pages)
Published Online: April 13, 2011
Article history
Received:
July 3, 2009
Revised:
September 27, 2010
Posted:
January 4, 2011
Published:
April 13, 2011
Online:
April 13, 2011
Citation
Kavlicoglu, B., Gordaninejad, F., and Wang, X. (April 13, 2011). "A Unified Approach for Flow Analysis of Magnetorheological Fluids." ASME. J. Appl. Mech. July 2011; 78(4): 041008. https://doi.org/10.1115/1.4003346
Download citation file:
Get Email Alerts
Hamiltonian System-Based Symplectic Framework for Analytical Vibration Analysis of Microplates
J. Appl. Mech (December 2024)
Related Articles
Effect of Pressure on the Flow Properties of Magnetorheological Fluids
J. Fluids Eng (September,2012)
Numerical Simulation of Viscoplastic Fluid Flows Through an Axisymmetric Contraction
J. Fluids Eng (September,2002)
Skin Friction Correlation in Open Channel Boundary Layers
J. Fluids Eng (December,2001)
Tribological Characteristics Modification of Magnetorheological Fluid
J. Tribol (July,2011)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Hydraulic Resistance
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
On the Evaluation of Thermal and Mechanical Factors in Low-Speed Sliding
Tribology of Mechanical Systems: A Guide to Present and Future Technologies