This paper investigates the hydroionic transport processes at the near surface of cement-based porous materials under external drying-wetting (D-W) actions. A basic multiphase model is retained and reviewed critically for moisture transport under D-W actions. The multiphase model fails to account for the substantial difference between moisture diffusivities during drying and wetting. The multiphase model is adapted for moisture transport under D-W actions through the respective mechanisms of moisture transport during drying and wetting. Together with the associated ionic transport, a global hydroionic model is established and the corresponding numerical scheme is developed to solve the near surface transport problem. Then, systematic experiments are performed on two concretes with high and low porosities for transport properties and hydroionic transport under D-W actions with pure water and salt solution. Experimental data validate the global model, while some fundamental aspects of hydroionic modeling are discussed.
Skip Nav Destination
Article navigation
March 2013
Research-Article
Modeling Hydroionic Transport in Cement-Based Porous Materials Under Drying-Wetting Actions
Kefei Li,
Kefei Li
1
Professor
e-mail: likefei@tsinghua.edu.cn
e-mail: likefei@tsinghua.edu.cn
1Corresponding author.
Search for other works by this author on:
Chunqiu Li
Chunqiu Li
Research Assistant
e-mail: lcq@mails.tsinghua.edu.cn
e-mail: lcq@mails.tsinghua.edu.cn
Department of Civil Engineering
,Tsinghua University
,Beijing 100084
, PRC
Search for other works by this author on:
Kefei Li
Professor
e-mail: likefei@tsinghua.edu.cn
e-mail: likefei@tsinghua.edu.cn
Chunqiu Li
Research Assistant
e-mail: lcq@mails.tsinghua.edu.cn
e-mail: lcq@mails.tsinghua.edu.cn
Department of Civil Engineering
,Tsinghua University
,Beijing 100084
, PRC
1Corresponding author.
Manuscript received August 4, 2011; final manuscript received April 6, 2012; accepted manuscript posted October 25, 2012; published online February 4, 2013. Assoc. Editor: Younane Abousleiman.
J. Appl. Mech. Mar 2013, 80(2): 020904 (9 pages)
Published Online: February 4, 2013
Article history
Received:
August 4, 2011
Revision Received:
April 6, 2012
Citation
Li, K., and Li, C. (February 4, 2013). "Modeling Hydroionic Transport in Cement-Based Porous Materials Under Drying-Wetting Actions." ASME. J. Appl. Mech. March 2013; 80(2): 020904. https://doi.org/10.1115/1.4007907
Download citation file:
Get Email Alerts
Related Articles
Influence of Irradiation Time, Particle Sizes, and Initial Moisture Content During Microwave Drying of Multi-Layered Capillary Porous Materials
J. Heat Transfer (February,2002)
Experimental and Theoretical Study of Heating/Drying of Moist Paper Sheet With a Gas-Fired Infrared Emitter
J. Heat Transfer (August,2001)
Effect of Hydrophobicity in Cathode Porous Media on PEM Fuel Cell Performance
J. Fuel Cell Sci. Technol (December,2010)
Nonequilibrium Molecular Dynamics Approach for Nanoelectromechanical
Systems: Nanofluidics and Its Applications
J. Fluids Eng (September,2007)
Related Proceedings Papers
Related Chapters
Syntheses of Mesoporous Silica Materials
Silica Nanoparticles as Drug Delivery System for Immunomodulator GMDP (Biomedical & Nanomedical Technologies - Concise Monograph Series)
Modelling Convective Drying of Soybean ( Glycine Max L ): Experiments and Numerical Simulation
International Conference on Electronics, Information and Communication Engineering (EICE 2012)
Macropore Spatial Variability of CT-Measured Solute Transport Parameters
Intelligent Engineering Systems through Artificial Neural Networks, Volume 20