Track tension is closely related to the maneuverability of tracked vehicles and the durability of their tracks and suspension systems. The tension needs to be maintained at an optimum level throughout the maneuver in order to minimize the excessive load on the tracks and to prevent track peeloff from the sprocket. In this paper, a track tension control system is developed for tracked vehicles which are subject to various maneuvering tasks. It consists of track tension estimator, track tension controller, and hydraulic unit. The tension around the idler and sprocket is estimated in real time, respectively. Using the estimated track tension and considering the highly nonlinear vehicle characteristics, a fuzzy logic controller is designed in order to control the track tension in the vehicles. The performance of the proposed tension control system is verified through simulation and experimental field tests.

Keywords:
control system synthesis, nonlinear control systems, force control, suspensions (mechanical components), fuzzy control, nonlinear dynamical systems, sprockets, hydraulic actuators, road vehicles
Topics:
Tension, Tracked vehicles, Control equipment
1.
Garnich, M. R., and Grimm, T. R., 1984, “Modeling and Simulation of a Tracked Vehicle,” International Computers in Engineering Conference, Las Vegas, Vol. 2, pp. 591–600.
2.
Oakley
,
R.
,
Quinn
,
D.
, and
Jones
,
R. D.
,
1994
, “
Track Tensioning Program for Tacom on the Active Suspension Scorpion (P3) Tank
,”
NTIS Report No.
,
ADA282723, U.S. Dept. of Commerce.
3.
Huh
,
K.
, and
Hong
,
D.
,
2001
, “
Track Tension Estimation in Tracked Vehicles Under Various Maneuvering Tasks
,”
ASME J. Dyn. Syst., Meas., Control
,
123
(
2
), pp.
179
–
185
.
4.
Ryu
,
H. S.
,
Bae
,
D. S.
,
Choi
,
J. H.
, and
Shabana
,
A.
,
2000
, “
Compliant Tank Link Model for High-Speed, High-Mobility Tracked Vehicle
,”
Int. J. Numer. Methods Eng.
,
48
, pp.
1481
–
1502
.
5.
Ehlert
,
W.
,
Hug
,
B.
, and
Schmid
,
I. C.
,
1992
, “
Field Measurements and Analytical Models as a Basis of Test Stand Simulation of the Turning Resistance of Tracked Vehicles
,”
J. Terramech.
,
29
(
1
), pp.
57
–
69
.
6.
Wong, J. Y., 1993, Theory of Ground Vehicles, 2nd ed., Wiley, New York.
7.
Kar
,
M. K.
,
1987
, “
Prediction of Track Forces in Skid-Steering of Military Tracked Vehicles
,”
J. Terramech.
,
24
(
1
), pp.
75
–
86
.
8.
Burke
,
D.
,
1992
, “
Specification Report for TACOM Track Tensioning Program
,”
NTIS Report
AD-A252 824, May, U.S. Dept. of Commerce.
9.
Sullivan, J. A., 1998, Fluid Power—Theory and Applications, Prentice-Hall, Engelwood, NJ.
10.
Lambeck, R. P., 1983, Hydraulic Pumps and Motors—Selection and Application for Hydraulic Power Control Systems, Marcel Dekker.
11.
Proportional Pressure Relief Valves, 2001, Catalog GB-2162E, Vickers, Inc.
12.
Bladder Accumulators, 2000, Catalog SB330 series, HYDAC, Co.
13.
Proportional Pressure Reducing Valves, 2001, Catalog GB-2322D, Vickers, Inc.
14.
79 Series Servovalves, 1999, Catalog 79 series, Moog, Inc.
15.
Servo and Proportional Systems Catalogue, 2001, M210-00.01, En04.92, pp. 61–66, Moog Co.
16.
Jang, J. R., Sun, C. T., and Mizutani, E., 1997, Neuro-Fuzzy and Soft Computing, Prentice-Hall, Englewood Cliffs, NJ.
17.
Kolodziej
,
C.
, and
Priemer
,
R.
,
1999
, “
Stability Analysis of Fuzzy Systems
,”
J. Franklin Inst.
,
336
, pp.
851
–
873
.
18.
Matlab/Simulink User’s Manual, 2000, The Mathworks Inc., Natick, MA.
19.
Kim, I. M., 2002, “Experimental Study on Dynamic Track Tensioning System in Tracked Vehicles,” M.S. thesis, Hanyang University, Seoul.
20.
Texas Instrument TMS320C6701 User’s Manual, 2001.
21.
Simula, G., Ruonavaara, N., and Pakkals, J., 1999, DTIS Operation Manual, KRC, Michigan Technological University, Houghton, MI.
Copyright © 2004
 by ASME
You do not currently have access to this content.