This paper describes the modeling and control of a proportional-injector direct-injection monopropellant-powered actuator for use in power-autonomous human-scale mobile robots. The development and use of proportional (as opposed to solenoid) injection valves enables a continuous and unified input/output description of the device, and therefore enables the development and implementation of a sliding-mode-type controller for the force control of the proposed actuator, which provides the stability guarantees characteristic of a sliding-mode control approach. Specifically, a three-input, single-output model of the actuation system behavior is developed, which takes a nonlinear non-control-canonical form. In order to implement a nonlinear controller, a constraint structure is developed that effectively renders the system single input, single output, and control canonical, and, thus, of appropriate form for the implementation of a sliding-mode controller. A sliding-mode controller is then developed and experimentally implemented on the proposed actuator. Experimental results demonstrate closed-loop force tracking with a saturation-limited bandwidth of approximately .
Skip Nav Destination
Article navigation
March 2006
Technical Briefs
A Unified Force Controller for a Proportional-Injector Direct-Injection Monopropellant-Powered Actuator
Kevin B. Fite,
Kevin B. Fite
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Search for other works by this author on:
Jason E. Mitchell,
Jason E. Mitchell
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Search for other works by this author on:
Eric J. Barth,
Eric J. Barth
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Search for other works by this author on:
Michael Goldfarb
Michael Goldfarb
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Search for other works by this author on:
Kevin B. Fite
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Jason E. Mitchell
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Eric J. Barth
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235
Michael Goldfarb
Department of Mechanical Engineering,
Vanderbilt University
, Nashville, TN 37235J. Dyn. Sys., Meas., Control. Mar 2006, 128(1): 159-164 (6 pages)
Published Online: November 14, 2005
Article history
Received:
February 3, 2005
Revised:
November 14, 2005
Citation
Fite, K. B., Mitchell, J. E., Barth, E. J., and Goldfarb, M. (November 14, 2005). "A Unified Force Controller for a Proportional-Injector Direct-Injection Monopropellant-Powered Actuator." ASME. J. Dyn. Sys., Meas., Control. March 2006; 128(1): 159–164. https://doi.org/10.1115/1.2168473
Download citation file:
Get Email Alerts
Fault detection of automotive engine system based on Canonical Variate Analysis combined with Bhattacharyya Distance
J. Dyn. Sys., Meas., Control
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control (July 2025)
Related Articles
Integrated System ID and Control Design for an IC Engine Variable Valve Timing System
J. Dyn. Sys., Meas., Control (March,2011)
A High Performance Pneumatic Force Actuator System: Part I—Nonlinear Mathematical Model
J. Dyn. Sys., Meas., Control (September,2000)
Passivity-Based Impact and Force Control of a Pneumatic Actuator
J. Dyn. Sys., Meas., Control (March,2008)
Related Proceedings Papers
Related Chapters
Cavitating Flow in a Model Diesel Injector Return Valve
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Case Studies
Nonlinear Regression Modeling for Engineering Applications: Modeling, Model Validation, and Enabling Design of Experiments
Station Automation
Pipeline System Automation and Control