Entropy generation due to combustion destroys as much as a third of the theoretical maximum work that could have been extracted from the fuel supplied to an engine. Yet, there is no fundamental study in the literature that addresses the question of how this quantity can be minimized so as to improve combustion engine efficiency. This paper fills the gap by establishing the minimum entropy generated in an adiabatic, homogeneous combustion piston engine. The minimization problem is cast as a dynamical system optimal control problem, with the piston velocity profile serving as the control input function. The closed-form switching condition for the optimal bang-bang control is determined based on Pontryagin’s maximum principle. The switched control is shown to be a function of the pressure difference between the instantaneous thermodynamic state of the system and its corresponding equilibrium thermodynamic state at the same internal energy and volume. At optimality, the entropy difference between these two thermodynamic states is shown to be a Lyapunov function. In thermodynamic terms, the optimal solution reduces to a strategy of equilibrium entropy minimization. This result is independent of the underlying combustion mechanism. It precludes the possibility of matching the piston motion in some sophisticated fashion to the nonlinear combustion kinetics in order to improve the engine efficiency. For illustration, a series of numerical examples are presented that compare the optimal bang-bang solution with the nonoptimal conventional solution based on slider-crank piston motion. Based on the solution for minimum entropy generation, a bound for the maximum expansion work that the piston engine is capable of producing is also deduced.
Skip Nav Destination
e-mail: kteh@sandia.gov
e-mail: cfe@stanford.edu
Article navigation
July 2008
Research Papers
An Optimal Control Approach to Minimizing Entropy Generation in an Adiabatic Internal Combustion Engine
Kwee-Yan Teh,
Kwee-Yan Teh
Department of Mechanical Engineering,
e-mail: kteh@sandia.gov
Stanford University
, Stanford, CA 94305
Search for other works by this author on:
Christopher F. Edwards
Christopher F. Edwards
Department of Mechanical Engineering,
e-mail: cfe@stanford.edu
Stanford University
, Stanford, CA 94305
Search for other works by this author on:
Kwee-Yan Teh
Department of Mechanical Engineering,
Stanford University
, Stanford, CA 94305e-mail: kteh@sandia.gov
Christopher F. Edwards
Department of Mechanical Engineering,
Stanford University
, Stanford, CA 94305e-mail: cfe@stanford.edu
J. Dyn. Sys., Meas., Control. Jul 2008, 130(4): 041008 (10 pages)
Published Online: June 9, 2008
Article history
Received:
March 1, 2007
Revised:
February 19, 2008
Published:
June 9, 2008
Citation
Teh, K., and Edwards, C. F. (June 9, 2008). "An Optimal Control Approach to Minimizing Entropy Generation in an Adiabatic Internal Combustion Engine." ASME. J. Dyn. Sys., Meas., Control. July 2008; 130(4): 041008. https://doi.org/10.1115/1.2936864
Download citation file:
Get Email Alerts
Multi Combustor Turbine Engine Acceleration Process Control Law Design
J. Dyn. Sys., Meas., Control
A Distributed Layered Planning and Control Algorithm for Teams of Quadrupedal Robots: An Obstacle-Aware Nonlinear Model Predictive Control Approach
J. Dyn. Sys., Meas., Control (May 2025)
Active Data-Enabled Robot Learning of Elastic Workpiece Interactions
J. Dyn. Sys., Meas., Control (May 2025)
Innovative Pressure Control With ANFIS-Enhanced Mode Switching for High-Speed Pneumatic Systems
J. Dyn. Sys., Meas., Control (May 2025)
Related Articles
Optimization of Annular Cylindrical and Spherical Fins in an Internal Combustion Engine Under Realistic Conditions
J. Thermal Sci. Eng. Appl (December,2010)
Spark Advance Modeling of Hydrogen-Fueled Spark Ignition Engines Using Combustion Descriptors
J. Eng. Gas Turbines Power (August,2018)
Applying Thermodynamics in Search of Superior Engine Efficiency
J. Eng. Gas Turbines Power (July,2005)
NH 3 as a Transport Fuel in Internal Combustion Engines: A Technical Review
J. Energy Resour. Technol (July,2019)
Related Proceedings Papers
Related Chapters
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines
Physiology of Human Power Generation
Design of Human Powered Vehicles
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students