The Rolls-Royce integrated-planar solid oxide fuel cell (IP-SOFC) consists of ceramic modules with electrochemical cells printed on the outer surfaces. The cathodes are supplied with oxygen from air flowing over the outside of the module and the anodes are supplied with fuel diffusing from the internal gas channels. Natural gas is reformed into hydrogen in a separate reformer module of similar design except that the fuel cells are replaced by a reforming catalyst layer. The performance of the modules is intrinsically linked to the behavior of the gas flows within their porous structures. The multi-component convective-diffusive flows are simulated using a new theory of flow in porous material, the cylindrical pore interpolation model. The effects of the catalyzed methane reforming and water-gas shift chemical reactions are also considered using appropriate kinetic models. It is found that the shift reaction, which is catalyzed by the anode material, has certain beneficial effects on the fuel cell module performance. The shift reaction enables the fuel cells to make effective use of carbon monoxide as a fuel when the supplied fuel has become depleted of hydrogen. In the reformer module the kinetics of the reaction make it difficult to sustain a high methane conversion rate. Although the analysis is based on IP-SOFC geometry, the modeling approach and general conclusions are applicable to other types of SOFCs.
Skip Nav Destination
e-mail: b.haberman.01@cantab.net
Article navigation
August 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
Special Issue Research Papers
Diffusion and Chemical Reaction in the Porous Structures of Solid Oxide Fuel Cells
B. A. Haberman,
B. A. Haberman
Hopkinson Laboratory,
e-mail: b.haberman.01@cantab.net
Cambridge University Engineering Department
, Trumpington Street, Cambridge, CB2 1PZ, UK
Search for other works by this author on:
J. B. Young
J. B. Young
Hopkinson Laboratory,
Cambridge University Engineering Department
, Trumpington Street, Cambridge, CB2 1PZ, UK
Search for other works by this author on:
B. A. Haberman
Hopkinson Laboratory,
Cambridge University Engineering Department
, Trumpington Street, Cambridge, CB2 1PZ, UKe-mail: b.haberman.01@cantab.net
J. B. Young
Hopkinson Laboratory,
Cambridge University Engineering Department
, Trumpington Street, Cambridge, CB2 1PZ, UKJ. Fuel Cell Sci. Technol. Aug 2006, 3(3): 312-321 (10 pages)
Published Online: January 17, 2006
Article history
Received:
November 23, 2005
Revised:
January 17, 2006
Citation
Haberman, B. A., and Young, J. B. (January 17, 2006). "Diffusion and Chemical Reaction in the Porous Structures of Solid Oxide Fuel Cells." ASME. J. Fuel Cell Sci. Technol. August 2006; 3(3): 312–321. https://doi.org/10.1115/1.2211637
Download citation file:
Get Email Alerts
Cited By
Optimization of Thermal Non-Uniformity Challenges in Liquid-Cooled Lithium-Ion Battery Packs Using NSGA-II
J. Electrochem. En. Conv. Stor (November 2025)
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method
J. Electrochem. En. Conv. Stor (November 2025)
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries
J. Electrochem. En. Conv. Stor (November 2025)
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Related Articles
A Detailed Three-Dimensional Simulation of an IP-SOFC Stack
J. Fuel Cell Sci. Technol (February,2008)
Modeling of Co-planar Type Single-Chamber Solid Oxide Fuel
Cells
J. Fuel Cell Sci. Technol (August,2011)
Three-Dimensional Numerical Analysis of Solid Oxide Electrolysis Cells Steam Electrolysis Operation for Hydrogen Production
J. Fuel Cell Sci. Technol (October,2015)
CFD Modeling: Different Kinetic Approaches for Internal Reforming Reactions in an Anode-Supported SOFC
J. Fuel Cell Sci. Technol (June,2011)
Related Proceedings Papers
Related Chapters
Energy Options and Terms: An Introduction
Energy Supply and Pipeline Transportation: Challenges & Opportunities
Influence of Experimental Conditions and Calculation Method on Hydrogen Diffusion Coefficient Evaluation at Elevated Temperatures
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments
Effect of Hydrogen and Addition of Oxygen on Fretting Fatigue Properties
International Hydrogen Conference (IHC 2012): Hydrogen-Materials Interactions