Sensitivity analysis and design optimization of solid oxide fuel cells are presented. Multispecies diffusion, low speed convection, and chemical kinetics are included in a two-dimensional numerical model, and sensitivity derivatives are computed using both discrete adjoint method and direct differentiation. The implementation of the discrete adjoint method is validated by comparing sensitivity derivatives obtained using the adjoint with results obtained using direct differentiation and finite-difference methods. For optimization, cost functions describing hydrogen concentration along the anode-electrolyte interface, hydrogen concentration at the channel outlet, and standard deviation of temperature inside the anode are considered. Material properties of the anode, operating conditions, and a shape parameter are selected as design variables. The development of an initial design environment to automate the flowfield solution, sensitivity computation, optimization, and mesh movement is also described. Finally, an adjoint-based error correction method is implemented and demonstrated to provide accurate estimations for a desired objective function on a fine mesh by combining information obtained from analysis and adjoint solutions on a coarser one.
Skip Nav Destination
e-mail: sagar-kapadia@utc.edu
e-mail: kyle-anderson@utc.edu
e-mail: louie-elliott@utc.edu
e-mail: chad-burdyshaw@utc.edu
Article navigation
May 2009
This article was originally published in
Journal of Fuel Cell Science and Technology
Research Papers
Adjoint-Based Sensitivity Analysis and Error Correction Methods Applied to Solid Oxide Fuel Cells
S. Kapadia,
e-mail: sagar-kapadia@utc.edu
S. Kapadia
Graduate Research Assistant
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403
Search for other works by this author on:
W. K. Anderson,
e-mail: kyle-anderson@utc.edu
W. K. Anderson
Professor
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403
Search for other works by this author on:
L. Elliott,
e-mail: louie-elliott@utc.edu
L. Elliott
Graduate Research Assistant
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403
Search for other works by this author on:
C. Burdyshaw
e-mail: chad-burdyshaw@utc.edu
C. Burdyshaw
Research Associate
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403
Search for other works by this author on:
S. Kapadia
Graduate Research Assistant
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403e-mail: sagar-kapadia@utc.edu
W. K. Anderson
Professor
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403e-mail: kyle-anderson@utc.edu
L. Elliott
Graduate Research Assistant
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403e-mail: louie-elliott@utc.edu
C. Burdyshaw
Research Associate
UT SimCenter at Chattanooga
, 701 East ML King Boulevard, Chattanooga, TN 37403e-mail: chad-burdyshaw@utc.edu
J. Fuel Cell Sci. Technol. May 2009, 6(2): 021010 (10 pages)
Published Online: February 25, 2009
Article history
Received:
June 16, 2007
Revised:
December 14, 2007
Published:
February 25, 2009
Citation
Kapadia, S., Anderson, W. K., Elliott, L., and Burdyshaw, C. (February 25, 2009). "Adjoint-Based Sensitivity Analysis and Error Correction Methods Applied to Solid Oxide Fuel Cells." ASME. J. Fuel Cell Sci. Technol. May 2009; 6(2): 021010. https://doi.org/10.1115/1.3005579
Download citation file:
Get Email Alerts
Cited By
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
In-situ synthesis nano PtRuW/WC HER catalyst for acid hydrogen evolution by microwave method
J. Electrochem. En. Conv. Stor
Related Articles
Solid Oxide Fuel Cell Design Optimization With Numerical Adjoint Techniques
J. Fuel Cell Sci. Technol (November,2009)
Demonstration of a 4-Cells SOFC Stack Under Different Experimental Conditions
J. Fuel Cell Sci. Technol (February,2008)
Eco-Friendly Screen-Printing Inks of Gadolinia Doped Ceria
J. Fuel Cell Sci. Technol (October,2010)
Study of the Rate Limiting Step of the Cathodic Process in Anode Supported Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol (February,2008)
Related Chapters
An Easy-to-Approach Comprehensive Model and Computation for SOFC Performance and Design Optimization
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Field Experience with Rebar Probes to Monitor Performance of Sprayed Zinc Galvanic Anodes on Concrete
Techniques to Assess the Corrosion Activity of Steel Reinforced Concrete Structures
A Smart Sampling Strategy for One-at-a-Time Sensitivity Experiments (PSAM-0360)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)