A transient thermal analysis is performed to investigate thermal control of power semiconductors using phase change materials, and to compare the performance of this approach to that of copper heat sinks. Both the melting of the phase change material under a transient power spike input, as well as the resolidification process, are considered. Phase change materials of different kinds (paraffin waxes and metallic alloys) are considered, with and without the use of thermal conductivity enhancers. Simple expressions for the melt depth, melting time and temperature distribution are presented in terms of the dimensions of the heat sink and the thermophysical properties of the phase change material, to aid in the design of passive thermal control systems. The simplified analytical expressions are verified against numerical simulations, and are shown to be excellent tools for design calculations. The suppression of junction temperatures achieved by the use of phase change materials when compared to the performance with copper heat sinks is illustrated. Merits of employing phase change materials for pulsed power electronics cooling applications are discussed.
Skip Nav Destination
e-mail: sureshg@ecn.purdue.edu
Article navigation
September 2004
Research Papers
Thermal Management of Transient Power Spikes in Electronics—Phase Change Energy Storage or Copper Heat Sinks?
Shankar Krishnan,
Shankar Krishnan
Cooling Technologies Research Center, Purdue University, West Lafayette, Indiana 47907-2088
Search for other works by this author on:
Suresh V. Garimella
e-mail: sureshg@ecn.purdue.edu
Suresh V. Garimella
Cooling Technologies Research Center, Purdue University, West Lafayette, Indiana 47907-2088
Search for other works by this author on:
Shankar Krishnan
Cooling Technologies Research Center, Purdue University, West Lafayette, Indiana 47907-2088
Suresh V. Garimella
Cooling Technologies Research Center, Purdue University, West Lafayette, Indiana 47907-2088
e-mail: sureshg@ecn.purdue.edu
Contributed by the Electronic and Photonic Packaging Division for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received June 2003; final revision, February 2004. Associate Editor: D. Agonafer.
J. Electron. Packag. Sep 2004, 126(3): 308-316 (9 pages)
Published Online: October 6, 2004
Article history
Received:
June 1, 2003
Revised:
February 1, 2004
Online:
October 6, 2004
Citation
Krishnan , S., and Garimella, S. V. (October 6, 2004). "Thermal Management of Transient Power Spikes in Electronics—Phase Change Energy Storage or Copper Heat Sinks? ." ASME. J. Electron. Packag. September 2004; 126(3): 308–316. https://doi.org/10.1115/1.1772411
Download citation file:
Get Email Alerts
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Impact of Encapsulated Phase Change Material Additives for Improved Thermal Performance of Silicone Gel Insulation
J. Electron. Packag (December 2024)
Related Articles
Thermal Properties of Disodium Hydrogen Phosphate Dodecahydrate–Coated Metal Foam/Sodium Acetate Trihydrate Composite as Phase Change Material
J. Sol. Energy Eng (February,2025)
A General Model for Analyzing the Thermal Performance of the Heat Charging and Discharging Processes of Latent Heat Thermal Energy Storage Systems
J. Sol. Energy Eng (August,2001)
A Two-Temperature Model for Solid-Liquid Phase Change in Metal Foams
J. Heat Transfer (September,2005)
Merits of Employing Foam Encapsulated Phase Change Materials for Pulsed Power Electronics Cooling Applications
J. Electron. Packag (June,2008)
Related Proceedings Papers
Related Chapters
Heat Transfer Enhancement for Thermal Energy Storage Using Metal Foams Embedded within Phase Change Materials (PCMS)
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Experimental Investigation of an Improved Thermal Response Test Equipment for Ground Source Heat Pump Systems
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Nuclear Fuel Materials and Basic Properties
Fundamentals of Nuclear Fuel