Thermal Design and Analysis of a Solid-State Grid-Tied Thermal Energy Storage for Hybrid Compressed Air Energy Storage Systems

Power overgeneration by renewable sources combined with less dispatchable conventional power plants introduces the power grid to a new challenge, i.e., instability. The stability of the power grid requires constant balance between generation and demand. A well-known solution to power overgeneration is grid-scale energy storage. Compressed air energy storage (CAES) has been utilized for grid-scale energy storage for a few decades. However, conventional diabatic CAES systems are difficult and expensive to construct and maintain due to their high-pressure operating condition. Hybrid compressed air energy storage (HCAES) systems are introduced as a new variant of old CAES technology to reduce the cost of energy storage using compressed air. The HCAES system split the received power from the grid into two subsystems. A portion of the power is used to compress air, as done in conventional CAES systems. The rest of the electric power is converted to heat in a high-temperature thermal energy storage (TES) component using Joule heating. A computational approach was adopted to investigate the performance of the proposed TES system during a full charge/storage/discharge cycle. It was shown that the proposed design can be used to receive 200 kW of power from the grid for 6 h without overheating the resistive heaters. The discharge computations show that the proposed geometry of the TES, along with a control strategy for the flow rate, can provide a 74-kW microturbine of the HCAES with the minimum required temperature, i.e., 1144 K at 0.6 kg/s of air flow rate for 6 h.