...Mahdi Sadri; Seyed M. Shariatipour Although the application of multi-phase flow meters has recently increased, the production of individual wells in many fields is still monitored by occasional flow tests using test separators. In the absence of flow measurement data during the time interval...

... to 250 rpm. Pressure drop within the test section, and stationary and/or moving bed thickness are recorded besides the other test conditions. The new correlations generated in this study are believed to be very practical and handy when they are used in the field. cuttings transport flow...

... burning velocity flame stretch chemically reactive flow combustion flames flow measurement fuel gasification gas mixtures heat transfer hydrogen laminar flow organic compounds syngas velocity measurement 15 01 2011 14 06 2011 06 09 2011 06 09 2011...

... overflow outlet u underflow outlet t tangential cyclone separators flow measurement flow separation oils pressure measurement rotational flow separation wastewater treatment water treatment dynamic hydrocyclone theoretical analysis experimental study...

... was shown by comparing the experiments. Furthermore, the formula between Reynolds number and Nusselt number was obtained, which express the heat transfer around the gas hydrate lump. 07 06 2005 19 08 2006 heat transfer flow measurement lattice gas pyrolysis hydrates decomposition...

.... 05 March 2001 13 April 2004 21 12 2004 swirling flow velocity measurement flow measurement laser velocimeters phase separation computational fluid dynamics turbulence 10 Horizontal plane color contour plot of axial and absolute tangential velocities at 318–467 mm...

... January 2004 19 10 2004 oil technology flow measurement optimisation economics Periodic measurements of flow rate and flow components, i.e., oil, water, and gas, has been used as a tool to monitor the performance of a well as well as the reservoir and to form the basis...

... for publication of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS . Manuscript received by the Petroleum Division, May 2001; revised manuscript received May 2003. Associate Editor: A. K. Wojtanowicz. 05 February 2001 01 May 2001 01 May 2003 18 11 2003 pipe flow two-phase flow flow...

.... 01 April 2001 01 December 2002 04 06 2003 surface topography measurement friction mechanical variables measurement flow measurement pressure measurement turbulence pipe flow natural gas technology fractals Friction Factor Turbulent Flow Wall Roughness Pressure Drop...

... gas technology flow measurement pressure sensors oscillations fluctuations pipe flow statistical analysis Production and transportation of gas and liquids is a common requirement in the oil and gas industry. The lack of accurate information on instantaneous flowrates of gas and oil...

... 28 June 2001 18 April 2002 06 08 2002 gas turbines combustion jets flames wind tunnels carbon compounds nitrogen compounds flow measurement A jet flame in a crossflow (JFCF) has several practical applications including primary combustion zones in gas turbines, reburn...

... to evolve, gain wide acceptance, and are used in the chemical, petroleum, food and beverage industries because of the several features that they posses over other types of flow measurement devices. This paper presents a performance evaluation of three types of coriolis mass flowmeters: U-tube, modified U...

..., it is necessary to know the configuration of the oil-water flow (the flow pattern) in the pipeline. The calculation of pressure drop in pipelines carrying oil-water mixtures also requires an accurate prediction of the flow pattern 2 . pipe flow stratified flow oil technology water mixtures flow...