The theory, design, and use of a focusing laser differential interferometer (FLDI) instrument are described. The FLDI is a relatively simple, nonimaging, common-path polarization interferometer for measuring refractive signals generated by turbulence, as well as small-amplitude acoustics and boundary-layer instabilities. It has in principle a unique ability to look through wind-tunnel windows, ignore sidewall boundary-layers and vibration, and concentrate only on the refractive signal near a pair of sharp beam foci in the core flow. The instrument's low cost and ease of implementation make it a promising alternative to traditional hot-wire anemometry (HWA) and particle-based methods for turbulence characterization. A matrix equation is written for the overall optical behavior of the FLDI, and transfer functions are developed to account for spatial filtering, f/number of the field lenses, various turbulence profiles, etc. Benchtop experiments using a turbulent sonic airjet demonstrate the focusing ability of the FLDI, its frequency response, and unwanted signal rejection. The instrument is also used to optically interrogate the flow in the Penn State Supersonic Wind Tunnel and in USAF AEDC Hypervelocity Tunnel 9, where it made preliminary measurements of freestream disturbance levels and power spectra. A central feature of the FLDI used here is the replacement of traditional fixed Wollaston birefringent prisms with variable Sanderson prisms for separation and recombination of the helium–neon laser beams, and for the accurate setting of micrometer-range beam separation distances required for successful turbulence measurements. The instrument also features phase compensation of the output, where perpendicularly polarized light signals are separately sensed by the twin photodetectors. This provides a unique ability to measure the coherence of turbulent spectra and thus to reject low-coherence noise.
Skip Nav Destination
Article navigation
October 2016
Research-Article
The Focusing Laser Differential Interferometer, an Instrument for Localized Turbulence Measurements in Refractive Flows
Gary S. Settles,
Gary S. Settles
Distinguished Professor Emeritus
Fellow ASME
Mechanical and Nuclear
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: gss2@psu.edu
Fellow ASME
Mechanical and Nuclear
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: gss2@psu.edu
Search for other works by this author on:
Matthew R. Fulghum
Matthew R. Fulghum
Mechanical and Nuclear
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: mfulghum@gmail.com
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: mfulghum@gmail.com
Search for other works by this author on:
Gary S. Settles
Distinguished Professor Emeritus
Fellow ASME
Mechanical and Nuclear
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: gss2@psu.edu
Fellow ASME
Mechanical and Nuclear
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: gss2@psu.edu
Matthew R. Fulghum
Mechanical and Nuclear
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: mfulghum@gmail.com
Engineering Department,
Penn State University,
Reber Building,
University Park, PA 16802
e-mail: mfulghum@gmail.com
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received December 30, 2015; final manuscript received May 27, 2016; published online July 21, 2016. Assoc. Editor: Francine Battaglia.
J. Fluids Eng. Oct 2016, 138(10): 101402 (10 pages)
Published Online: July 21, 2016
Article history
Received:
December 30, 2015
Revised:
May 27, 2016
Citation
Settles, G. S., and Fulghum, M. R. (July 21, 2016). "The Focusing Laser Differential Interferometer, an Instrument for Localized Turbulence Measurements in Refractive Flows." ASME. J. Fluids Eng. October 2016; 138(10): 101402. https://doi.org/10.1115/1.4033960
Download citation file:
Get Email Alerts
Related Articles
Uncertainty Evaluation of Friction Velocity Measurements by Oil-Film Interferometry
J. Fluids Eng (May,2017)
Editorial
J. Fluids Eng (December,2000)
Effects of Surface Waviness on the Interaction of Oblique Shock Wave With Turbulent Boundary Layer
J. Fluids Eng (April,2018)
Velocity and NO-Lifetime Measurements in an Unseeded Hypersonic Air Flow
J. Fluids Eng (December,2018)
Related Proceedings Papers
Related Chapters
Applications
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Natural Gas Transmission
Pipeline Design & Construction: A Practical Approach, Third Edition
Fluid Mechanics
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis