Abstract

Submerged annular viscoplastic jet flows were studied numerically within the steady laminar flow regime. The impacts of inner-to-outer annular nozzle diameter ratio, and yield number, for uniform and fully-developed inflow conditions, were investigated. The extent of the outer recirculation region and recirculation intensities of both the central and outer regions were found to substantially diminish with the yield number, resulting in the elimination of recirculation throughout the whole flow field at high yield numbers. The axial penetration of the jet decreases with both the yield number and the annular diameter ratio. The impact of inflow conditions on the flow structure and decay characteristics of the jet are more pronounced at low yield numbers.

References

1.
Chhabra
,
R. P.
, and
Richardson
,
J. F.
,
2008
,
Non-Newtonian Flow and Applied Rheology: Engineering Applications
, 2nd ed.,
Butterworth-Heinemann
,
Oxford, UK
.
2.
Milanovic
,
I. M.
, and
Hammad
,
K. J.
,
2010
, “
PIV Study of the Near-Field Region of a Turbulent Round Jet
,”
ASME
Paper No. FEDSM-ICNMM2010-31139.10.1115/FEDSM-ICNMM2010-31139
3.
Landfried
,
D. T.
,
Jana
,
A.
, and
Kimber
,
M. L.
,
2015
, “
Characterization of the Behaviour of Confined Laminar Round Jets
,”
ASME J. Fluids Eng.
,
137
(
3
), p.
034501
.10.1115/1.4028834
4.
Bird
,
R. B.
,
Dai
,
G. C.
, and
Yarusso
,
B. J.
,
1983
, “
The Rheology and Flow of Viscoplastic Materials
,”
Rev. Chem. Eng.
,
1
(
1
), pp.
1
70
.10.1515/revce-1983-0102
5.
Ellwood
,
K. R. J.
,
Georgiou
,
G. C.
,
Papanastasiou
,
T. C.
, and
Wilkes
,
J. O.
,
1990
, “
Laminar Jets of Bingham Plastic Liquids
,”
J. Rheol.
,
34
(
6
), pp.
787
812
.10.1122/1.550144
6.
Papanastasiou
,
T. C.
,
1987
, “
Flow of Materials With Yield
,”
J. Rheol.
,
31
(
5
), pp.
385
404
.10.1122/1.549926
7.
Shekarriz
,
A.
,
Hammad
,
K. J.
, and
Powell
,
M. R.
,
1997
, “
Evaluation of Scaling Correlations for Mobilization of Double-Shell Tank Waste
,”
U.S. Department of Energy by the Pacific Northwest National Laboratory
,
Richland, WA
, Report No.
PNNL-11737
.https://digital.library.unt.edu/ark:/67531/metadc697397/m1/5/
8.
Gauglitz
,
P. A.
,
Wells
,
B. E.
,
Bamberger
,
J. A.
,
Fort
,
J. A.
,
Chun
,
J.
, and
Jenks
,
J. J.
,
2010
, “
The Role of Cohesive Particle Interactions on Solids Uniformity and Mobilization During Jet Mixing: Testing Recommendations
,”
U.S. Department of Energy by the Pacific Northwest National Laboratory
,
Richland, WA
, Report No.
PNNL-19245
.10.2172/992368
9.
Serth
,
R. W.
, and
Mayaguez
,
P. R.
,
1972
, “
The Axisymmetric Free Laminar Jet of a Power-Law Fluid
,”
J. Appl. Math. Phys.
,
23
(
1
), pp.
131
138
.10.1007/BF01593210
10.
Mitwally
,
E. M.
,
1978
, “
Solutions of Laminar Jet Flow Problems for Non-Newtonian Power-Law Fluids
,”
ASME J. Fluids Eng.
,
100
(
3
), pp.
363
366
.10.1115/1.3448682
11.
Kumar
,
K. R.
,
Rankin
,
G. W.
, and
Shidhar
,
K.
,
1984
, “
Laminar Length of a Non-Newtonian Fluid Jet
,”
J. Non-Newtonian Fluid Mech.
,
15
(
1
), pp.
13
27
.10.1016/0377-0257(84)80025-7
12.
Jordan
,
C.
,
Rankin
,
G. W.
, and
Sridhar
,
K.
,
1992
, “
A Study of Submerged Pseudoplastic Laminar Jets
,”
J. Non-Newtonian Fluid Mech.
,
41
(
3
), pp.
323
337
.10.1016/0377-0257(92)87005-V
13.
Shekarriz
,
A.
, and
Hammad
,
K. J.
,
1997
, “
Submerged Jet Flows of Newtonian and Pseudoplastic Non-Newtonian Fluids
,”
Album Visualization
,
14
, pp.
23
24
.
14.
Jafri
,
I. H.
, and
Vradis
,
G. C.
,
1998
, “
The Evolution of Laminar Jets of Herschel-Bulkley Fluids
,”
Int. J. Heat Mass Transfer
,
41
(
22
), pp.
3575
3588
.10.1016/S0017-9310(98)00050-7
15.
Hammad
,
K. J.
,
2000
, “
Effect of Hydrodynamic Conditions on Heat Transfer in a Complex Viscoplastic Flow Field
,”
Int. J. Heat Mass Transfer
,
43
(
6
), pp.
945
962
.10.1016/S0017-9310(99)00179-9
16.
Hammad
,
K. J.
,
2014
, “
Velocity and Momentum Decay Characteristics of a Submerged Viscoplastic Jet
,”
ASME J. Fluids Eng.
,
136
(
2
), p.
021205
.10.1115/1.4025990
17.
Hammad
,
K. J.
,
2016
, “
The Flow and Decay Behavior of a Submerged Shear-Thinning Jet With Yield Stress
,”
ASME J. Fluids Eng.
,
138
(
8
), p.
081205
.10.1115/1.4033027
18.
Hammad
,
K. J.
,
2014
, “
Visualization of an Annular Viscoplastic Jet
,”
J. Visualization
,
17
(
1
), pp.
5
16
.10.1007/s12650-013-0190-1
19.
Wu
,
Y. H.
, and
Liu
,
K. F.
,
2015
, “
Formulas for Calibration of Rheological Parameters of Bingham Fluid in Couette Rheometer
,”
ASME J. Fluids Eng.
,
137
(
4
), p.
041202
.10.1115/1.4028813
20.
Mao
,
M.
,
Hu
,
W.
,
Choi
,
Y. T.
,
Wereley
,
N. M.
,
Browne
,
A. L.
,
Ulicny
,
J.
, and
Johnson
,
N.
,
2013
, “
Nonlinear Modeling of Magnetorheological Energy Absorbers Under Impact Conditions
,”
Smart Mater. Struct.
,
22
(
11
), p.
115015
.10.1088/0964-1726/22/11/115015
21.
Gram
,
A.
,
Silfwerbrand
,
J.
, and
Lagerblad
,
B.
,
2014
, “
Obtaining Rheological Parameters From Flow Test-Analytical, Computational and Lab Test Approach
,”
Cem. Concr. Res.
,
63
, pp.
29
34
.10.1016/j.cemconres.2014.03.012
22.
Tavakkoli
,
M.
,
Taghikhani
,
V.
,
Pishvaie
,
M. R.
,
Masihi
,
M.
,
Panuganti
,
S. R.
, and
Chapman
,
W. G.
,
2014
, “
Investigation of Oil-Asphaltene Slurry Rheological Behavior
,”
J. Dispersion Sci. Technol.
,
35
(
8
), pp.
1155
1162
.10.1080/01932691.2013.834421
23.
Jeong
,
S. W.
,
2013
, “
Determining the Viscosity and Yield Surface of Marine Sediments Using Modified Bingham Models
,”
Geosci. J.
,
17
(
3
), pp.
241
247
.10.1007/s12303-013-0038-7
24.
Meng
,
X.
,
Zhang
,
Y.
,
Zhou
,
F.
, and
Chu
,
P. K.
,
2012
, “
Effects of Carbon Ash on Rheological Properties of Water-Based Drilling Fluids
,”
J. Pet. Sci. Eng.
,
100
, pp.
1
8
.10.1016/j.petrol.2012.11.011
25.
Claesson
,
J.
,
Rasmuson
,
A.
,
Wiklund
,
J.
, and
Wikström
,
T.
,
2013
, “
Measurement and Analysis of Flow of Concentrated Fiber Suspensions Through a 2-D Sudden Expansion Using UVP
,”
AIChE J.
,
59
(
3
), pp.
1012
1021
.10.1002/aic.13881
26.
Mahaut
,
F.
,
Gauthier
,
G.
,
Gouze
,
P.
,
Luquot
,
L.
,
Salin
,
D.
, and
Martin
,
J.
,
2014
, “
Rheological Characterization of Olivine Slurries, Sheared Under CO2 Pressure
,”
Environ. Prog. Sustainable Energy
,
33
(
2
), pp.
572
580
.10.1002/ep.11826
27.
Alehossein
,
H.
,
Shen
,
B.
,
Qin
,
Z.
, and
Huddlestone-Holmes
,
C.
,
2012
, “
Flow Analysis, Transportation, and Deposition of Frictional Viscoplastic Slurries and Pastes in Civil and Mining Engineering
,”
J. Mater. Civ. Eng.
,
24
(
6
), pp.
644
657
.10.1061/(ASCE)MT.1943-5533.0000443
28.
Hammad
,
K. J.
,
2012
, “
Depth of Penetration of a Submerged Viscoplastic Non-Newtonian Jet
,”
ASME
Paper No. FEDSM2012-72456.10.1115/FEDSM2012-72456
29.
Hammad
,
K. J.
,
Ötügen
,
M. V.
,
Vradis
,
G. C.
, and
Arik
,
E. B.
,
1999
, “
Laminar Flow of a Nonlinear Viscoplastic Fluid Through an Axisymmetric Sudden Expansion
,”
ASME J. Fluids Eng.
,
121
(
2
), pp.
488
495
.10.1115/1.2822235
30.
Hammad
,
K. J.
,
Wang
,
F.
,
Ötügen
,
M. V.
, and
Vradis
,
G. C.
,
1997
, “
Suddenly Expanding Axisymmetric Flow of a Yield Stress Fluid
,”
Album Visualization
,
14
, pp.
17
18
.
31.
Hammad
,
K. J.
, and
Shekarriz
,
A.
,
1998
, “
Turbulence in Confined Axisymmetric Jets of Newtonian and Non-Newtonian Fluids
,”
ASME
Paper No. FEDSM98-5272.10.1115/FEDSM98-5272
32.
Celik
,
I. B.
,
Ghia
,
U.
,
Roache
,
P. J.
,
Freitas
,
C. J.
,
Coleman
,
H. W.
, and
Raad
,
P. E.
,
2008
, “
Procedure for Estimation of Uncertainty Due to Discretization in CFD Applications
,”
ASME J. Fluids Eng.
,
130
(
7
), p.
078001
.10.11151/1.2960953
33.
Del Taglia
,
C.
,
Moser
,
A.
, and
Blum
,
L.
,
2009
, “
Spontaneous Break of Symmetry in Unconfined Laminar Annular Jets
,”
ASME J. Fluids Eng.
,
131
, p.
081202
.10.1115/1.3176960
34.
Wawrzak
,
K.
,
Boguslawski
,
A.
,
Tyliszczak
,
A.
, and
Saczek
,
M.
,
2019
, “
LES Study of Global Instability in Annular Jets
,”
Int. J. Heat Fluid Flow
,
79
, p.
108460
.10.1016/j.ijheatfluidflow.2019.108460
35.
Douglas
,
C. M.
,
Emerson
,
B. L.
, and
Lieuwen
,
T. C.
,
2022
, “
Dynamics and Bifurcations of Laminar Annular Swirling and Non-Swirling Jets
,”
J. Fluid Mech.
,
943
, p.
A35
.10.1017/jfm.2022.453
You do not currently have access to this content.