Skip Nav Destination
Issues
1929
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Applied Mechanics
Research Papers
Journal Running Positions
Trans. ASME. January 1929, 51(2): 21–30.
doi: https://doi.org/10.1115/1.4059009
Topics:
Bearings
,
Clearances (Engineering)
,
Friction
,
Leakage
,
Lubrication
,
Pressure
,
Steam turbines
,
Stress
,
Viscosity
Combustion at High Pressures
Trans. ASME. January 1929, 51(2): 37–44.
doi: https://doi.org/10.1115/1.4059012
Topics:
Combustion
,
Combustion chambers
,
Flames
,
Heat losses
,
Hydrogen
,
Pressure
,
Temperature
Combined Stresses in Thick-Walled Cylinders
Trans. ASME. January 1929, 51(2): 61–65.
doi: https://doi.org/10.1115/1.4059015
Topics:
Cylinders
,
Stress
,
Tension
,
Compression
,
Steel
Telephone-Apparatus Springs: A Review of the Principal Types and the Properties Desired of These Springs
Trans. ASME. January 1929, 51(2): 81–83.
doi: https://doi.org/10.1115/1.4059017
Topics:
Springs
The Piston-Crosshead Motion of the Oilgear Pump
Trans. ASME. January 1929, 51(2): 85–90.
doi: https://doi.org/10.1115/1.4059018
Topics:
Pistons
,
Pumps
,
Cylinders
,
Design
,
Engines
,
Gates (Closures)
,
Motors
,
Noise (Sound)
,
Pressure
,
Vibration
Deflection of a Round-End Strut Subjected to a Constant Moment or a Transverse Force at the Middle
Trans. ASME. January 1929, 51(2): 93–100.
doi: https://doi.org/10.1115/1.4059019
Design of Columns of Varying Cross-Sections
Trans. ASME. January 1929, 51(2): 105–109.
doi: https://doi.org/10.1115/1.4059021
Calculation of Flywheels for Air Compressors
Trans. ASME. January 1929, 51(2): 117–130.
doi: https://doi.org/10.1115/1.4059023
Design of Ellipsoidal Heads for Pressure Vessels
Trans. ASME. January 1929, 51(2): 137–143.
doi: https://doi.org/10.1115/1.4059025
Topics:
Design
,
Pressure vessels
,
Pressure
,
Shapes
,
Storage tanks
,
Stress
,
Stress concentration
Analysis of the Uniform-Rise and Uniform-Pressure-Angle Cam Curves: A Method of Designing Cams by Means of Prepared Charts
Trans. ASME. January 1929, 51(2): 149–158.
doi: https://doi.org/10.1115/1.4059027
Friction of Journal Bearings as Influenced by Clearance and Length
Trans. ASME. January 1929, 51(2): 161–166.
doi: https://doi.org/10.1115/1.4059028
Topics:
Clearances (Engineering)
,
Friction
,
Journal bearings
,
Bearings
,
Lubricants
,
Machinery
,
Stress
,
Viscosity
Stress Distribution in Rotating Disks of Ductile Material After the Yield Point Has Been Reached
Trans. ASME. January 1929, 51(2): 173–180.
doi: https://doi.org/10.1115/1.4059030
Topics:
Rotating disks
,
Stress concentration
,
Yield point
,
Disks
,
Stress
,
Deformation
Stresses in Heavy Closely Coiled Helical Springs
Trans. ASME. January 1929, 51(2): 185–193.
doi: https://doi.org/10.1115/1.4059032
Topics:
Springs
,
Stress
,
Compression
,
Failure
,
Railroads
,
Strain measurement
Graphical Methods for Least-Square Problems
Trans. ASME. January 1929, 51(2): 201–208.
doi: https://doi.org/10.1115/1.4059034
Flow Characteristics of Submerged Jets
Trans. ASME. January 1929, 51(2): 213–218.
doi: https://doi.org/10.1115/1.4059036
A New High-Speed Fan
Trans. ASME. January 1929, 51(2): 219–223.
doi: https://doi.org/10.1115/1.4059037
Practical Determination of Torsional Vibration in an Engine Installation Which May Be Simplified to a Two-Mass System
Trans. ASME. January 1929, 51(2): 239–263.
doi: https://doi.org/10.1115/1.4059040
Turbine Vibration and Balancing
Trans. ASME. January 1929, 51(2): 267–280.
doi: https://doi.org/10.1115/1.4059041
Topics:
Turbines
,
Vibration
,
Rotors
,
Analytical methods
,
Bearings
,
Complex systems
,
Impulse (Physics)
,
Instrumentation
,
Turbogenerators
Stress Distribution and Hysteresis Losses in Springs: Progress Report No. 4 of the A.S.M.E. Special Research Committe on Mechanical Springs (Technological)
Trans. ASME. January 1929, 51(2): 287–303.
doi: https://doi.org/10.1115/1.4059043
Discussions and Closures
Discussion: “The Mechanics of Plate Rotors for Turbo Generators” (Den Hartog, J. P., 1929, Trans. ASME, 51(2), pp. 1–9)
Trans. ASME. January 1929, 51(2): 9–11.
doi: https://doi.org/10.1115/1.4059006
Topics:
Rotors
,
Turbogenerators
Discussion: “Tests on Belleville Springs by the Ordnance Department, U. S. Army” (Gurney, D. A., 1929, Trans. ASME, 51(2), pp. 13–17)
Trans. ASME. January 1929, 51(2): 17–18.
doi: https://doi.org/10.1115/1.4059008
Discussion: “Journal Running Positions” (Howarth, H. A. S., 1929, Trans. ASME, 51(2), pp. 21–30)
Trans. ASME. January 1929, 51(2): 30–33.
doi: https://doi.org/10.1115/1.4059010
Discussion: “Fatigue and Corrosion-Fatigue of Spring Material” (McAdam, Jr., D. J., 1929, Trans. ASME, 51(2), pp. 45–56)
Trans. ASME. January 1929, 51(2): 56–58.
doi: https://doi.org/10.1115/1.4059014
Discussion: “Deflection of a Round-End Strut Subjected to a Constant Moment or a Transverse Force at the Middle” (Boyd, James E., 1929, Trans. ASME, 51(2), pp. 93–100)
Trans. ASME. January 1929, 51(2): 100–103.
doi: https://doi.org/10.1115/1.4059020
Topics:
Deflection
,
Struts (Engineering)
Discussion: “Design of Columns of Varying Cross-Sections” (Dinnik, A., and Maletz, M., 1929, Trans. ASME, 51(2), pp. 105–109)
Trans. ASME. January 1929, 51(2): 109–114.
doi: https://doi.org/10.1115/1.4059022
Discussion: “Calculation of Flywheels for Air Compressors” (Goss, H. R., and Putman, H. V., 1929, Trans. ASME, 51(2), pp. 117–130)
Trans. ASME. January 1929, 51(2): 130–133.
doi: https://doi.org/10.1115/1.4059024
Discussion: “Design of Ellipsoidal Heads for Pressure Vessels” (Greene, T. W., 1929, Trans. ASME, 51(2), pp. 137–143)
W. M. Coates, G. M. Eaton, H. E. Rockefeller, A. L. Kimball, G. O. Carter, W. Trinks, B. L. Newkirk, Richard A. E. de Jonge, L. H. Burkhart, T. W. Greene
Trans. ASME. January 1929, 51(2): 143–147.
doi: https://doi.org/10.1115/1.4059026
Topics:
Design
,
Pressure vessels
Discussion: “Friction of Journal Bearings as Influenced by Clearance and Length” (McKee, S. A., and McKee, T. R., 1929, Trans. ASME, 51(2), pp. 161–166)
H. Weiss, A. R. Roberts, L. R. McCurdy, H. Bateman, E. O. Waters, H. A. S. Howarth, G. B. Karelitz, M. D. Hersey, S. A. McKee, T. R. McKee
Trans. ASME. January 1929, 51(2): 166–171.
doi: https://doi.org/10.1115/1.4059029
Discussion: “Stress Distribution in Rotating Disks of Ductile Material After the Yield Point Has Been Reached” (Nadai, A., and Donnell, L. H., 1929, Trans. ASME, 51(2), pp. 173–180)
S. Timoshenko, M. Stone, G. B. Karelitz, A. L. Kimball, Alphonse A. Adler, J. M. Lessells, A. Nadai, L. H. Donnell
Trans. ASME. January 1929, 51(2): 180–181.
doi: https://doi.org/10.1115/1.4059031
Discussion: “Stresses in Heavy Closely Coiled Helical Springs” (Wahl, A. M., 1929, Trans. ASME, 51(2), pp. 185–193)
Trans. ASME. January 1929, 51(2): 193–200.
doi: https://doi.org/10.1115/1.4059033
Discussion: “Graphical Methods for Least-Square Problems” (Waters, Everett O., 1929, Trans. ASME, 51(2), pp. 201–208)
Trans. ASME. January 1929, 51(2): 208–210.
doi: https://doi.org/10.1115/1.4059035
Discussion: “Vibration Damping, Including the Case of Solid Friction” (Kimball, A. L., 1929, Trans. ASME, 51(2), pp. 227–230)
Trans. ASME. January 1929, 51(2): 230–236.
doi: https://doi.org/10.1115/1.4059039
Discussion: “Turbine Vibration and Balancing” (Rathbone, Thomas C., 1929, Trans. ASME, 51(2), pp. 267–280)
Trans. ASME. January 1929, 51(2): 281–284.
doi: https://doi.org/10.1115/1.4059042
Discussion: “Stress Distribution and Hysteresis Losses in Springs: Progress Report No. 4 of the A.S.M.E. Special Research Committe on Mechanical Springs (Technological)” (Sayre, M. F., and Hoadley, Anthony, 1929, Trans. ASME, 51(2), pp. 287–303)
Trans. ASME. January 1929, 51(2): 303–305.
doi: https://doi.org/10.1115/1.4059044
Topics:
Springs
,
Stress concentration
Errata
Erratum: “Measurement of Flow of Air and Gas with Nozzles” (Transactions of the ASME, 1928, 49-50(2), p. 021003)
Trans. ASME. January 1929, 51(2): 35.
doi: https://doi.org/10.1115/1.4059011
Topics:
Flow measurement
,
Nozzles
Erratum: “The Piston-Crosshead Motion of the Oilgear Pump” (Transactions of the ASME, 1929, 51(2), pp. 85–90)
Trans. ASME. January 1929, 51(2): 307.
doi: https://doi.org/10.1115/1.4059045
Erratum: “Discussion of ‘Stresses in Heavy Closely Coiled Helical Springs’” (Transactions of the ASME, 1929, 51(2), pp. 197–199)
Trans. ASME. January 1929, 51(2): 307–308.
doi: https://doi.org/10.1115/1.4059046
Email alerts
RSS Feeds
Enhancement of the Thermodynamic Suppression Effect of Cavitation in a Hydrofoil With a Slit
J. Fluids Eng (September 2025)
