...Zhipeng Ren; Deyou Li; Honglei Hao; Hongjie Wang; Jintao Liu; Yong Li On-orbit refueling and space circulation technologies involve the use of a space micropump to transport gas–liquid mixed fluids, which affects the gas–liquid mass transfer and dynamic behaviors. To predict dynamic mass transfer...

... the well-known Newton–Raphson method. The heat and mass transfer phenomenon drives the unstable interface toward stability. It is pointed out that the viscoelastic coefficient λ o influences the interface to be stable while the thickness of the viscoelastic fluid makes the interface unstable. Atwood...

... of the perturbation, and the interface gets destabilized. 1 Corresponding author. e-mail:  mukeshiitr.kumar@gmail.com 07 01 2022 25 04 2022 19 05 2022 planar configuration power-law fluid instability heat transfer mass transfer University Grants Commission 10.13039...

... 03 02 2014 In this paper, the flow and mass transfer of a two-dimensional unsteady stagnation-point flow over a moving wall, considering the coupled blowing effect from mass transfer, is studied. Similarity equations are derived and solved in a closed form. The flow solution is an exact...

.../analytical models in the literature are one-dimensional models involving with many simplifying assumptions. These assumptions in most cases include neglecting some mechanisms of mass transfer in two-phase flows. This study is devoted to developing an analytical two-dimensional model for simulation of fluid...

...Dong-Hyeog Yoon; Kyung-Soo Yang; Klaus Bremhorst Characteristics of turbulent mass transfer around a rotating circular cylinder have been investigated by Direct Numerical Simulation. The concentration field was computed for three different cases of Schmidt number, Sc = 1, 10 and 100 at Re R * = 336...

...Bin Ji; Xianwu Luo; Xin Wang; Xiaoxing Peng; Yulin Wu; Hongyuan Xu The cavitating flows around a highly skewed model marine propeller in both uniform flow and wake flow have been simulated by applying a mass transfer cavitation model based on Rayleigh–Plesset equation and k - ω shear stress...

...Robert A. Leishear; Hector N. Guerrero; Michael L. Restivo; David J. Sherwood Mass transfer rates were measured in a large scale system, which is consisted of an 8.4 m tall by 0.76 m diameter column, containing one of the three fluids: water with an antifoam agent, water without an antifoam agent...

...T. E. Moschandreou; C. G. Ellis; D. Goldman An approximate-analytical solution method is presented for the problem of mass transfer in a rigid tube with pulsatile flow. For the case of constant wall concentration, it is shown that the generalized integral transform (GIT) method can be used...

..., the results of this work not only enrich the literature of condensation but also provide additional methods for saving thermal energy. 16 08 2008 10 04 2009 23 06 2009 film condensation film flow finite difference methods heat transfer iterative methods mass transfer slip flow...

... 2009 flow simulation Knudsen flow mass transfer microfluidics micropumps Navier-Stokes equations numerical analysis slip flow microfluidics viscous micropump slip flow low Reynolds number CFD Micropumps are important devices in various fields such as medical science...

... theory describes the main characteristics of the flow very well. 28 07 2006 31 01 2008 06 03 2009 drops flow simulation mass transfer nozzles numerical analysis pipe flow two-phase flow vortices Laval nozzle vortex flow natural gas Condi-Cyclone The behavior...

... 03 10 2008 02 12 2008 Boltzmann equation flow simulation mass transfer microchannel flow Navier-Stokes equations slip flow subsonic flow The progress in the fabrication technique during the past ten years lead to the miniaturization of many devices (micropumps, microvalves...

... that are advantageous compared to traditional packed beds or monoliths. Microfibrous materials have demonstrated enhanced heat and mass transfer compared to packed beds of particles of similar dimensions. In this paper, the simulations are used to predict the pressure drop per unit length through the materials...

... = 1.1 18 12 2006 17 12 2007 05 05 2008 cavitation computational fluid dynamics flow instability flow simulation fluid oscillations mass transfer numerical analysis pumps rocket engines vortices CFD inducer vortex structure rotating cavitation cavitation...

... 2008 compressibility laminar flow mass transfer microchannel flow pipe flow slip flow corrugations roughness perturbation slip flow microtubes Fluid flow in microchannels has emerged as an important research area. This has been motivated by their various applications...

... in the flow and shear-layer characteristics, and their influence on the ejection of the passive contaminant from the cavity. 01 08 2006 05 06 2007 cavitation channel flow external flows flow simulation mass transfer turbulence vortices open cavity detached eddy simulation large...

... displaces the jet passing through the first inlet and is thereby responsible for the curvature of the jet. None of the succeeding jets is subjected to such a recirculation zone. 13 03 2006 05 10 2006 confined flow manifolds conservation laws flow simulation plates (structures) mass...

...Ramin K. Rahmani; Anahita Ayasoufi; Theo G. Keith The use of in-line static mixers has been widely advocated for an important variety of applications, such as continuous mixing, heat and mass transfer processes, and chemical reactions. This paper extends previous studies by the authors...

...Jong-Yeon Hwang; Kyung-Soo Yang; Klaus Bremhorst Turbulent flow around a rotating circular cylinder has numerous applications including wall shear stress and mass-transfer measurement related to the corrosion studies. It is also of interest in the context of flow over convex surfaces where standard...