Fuel-air mixing in a direct injection spark ignition (DISI) engine occurs in a highly unsteady, turbulent and three-dimensional flow. As a result, any cycle-to-cycle unsteady variation in the mixing process can directly impact the performance of the DISI engine. To study the unsteady process in these engines, we have developed and implemented a large-eddy simulation (LES) approach with an innovative subgrid scalar mixing model based on the linear-eddy mixing (LEM) model into a commercial IC engine code (KIVA-3V). Time-averaged results of the simulations using the new LES version (KIVALES) are compared to the steady-state predictions of the original KIVA-3V. Significantly different in-cylinder turbulent fuel-air mixing is predicted by these two methods. Analysis shows that KIVALES resolves spatial features larger than the grid and that the subgrid kinetic energy adjusts to the LES resolution. As a result, KIVALES captures a highly unsteady, anisotropic fuel-air mixing process whereas a more diffused mixed field is predicted by the original KIVA-3V. This ability of KIVALES is attributed to the subgrid closure which scales the subgrid dissipation with the local grid size and thus, decreases the overall dissipation in the flow.
Skip Nav Destination
e-mail: suresh.menon@aerospace.gatech.edu
Article navigation
April 2003
Technical Papers
Effect of Subgrid Modeling on the In-Cylinder Unsteady Mixing Process in a Direct Injection Engine
K. Sone,
K. Sone
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332
Search for other works by this author on:
S. Menon
e-mail: suresh.menon@aerospace.gatech.edu
S. Menon
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332
Search for other works by this author on:
K. Sone
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332
S. Menon
School of Aerospace Engineering, Georgia Institute of Technology, Atlanta, GA 30332
e-mail: suresh.menon@aerospace.gatech.edu
Contributed by the Internal Combustion Engine Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received by the ICE Division May 23, 2001; final revision received by the ASME Headquarters December 1, 2001. Associate Editor: D. Assanis.
J. Eng. Gas Turbines Power. Apr 2003, 125(2): 435-443 (9 pages)
Published Online: April 29, 2003
Article history
Received:
May 23, 2001
Revised:
December 1, 2001
Online:
April 29, 2003
Citation
Sone , K., and Menon, S. (April 29, 2003). "Effect of Subgrid Modeling on the In-Cylinder Unsteady Mixing Process in a Direct Injection Engine ." ASME. J. Eng. Gas Turbines Power. April 2003; 125(2): 435–443. https://doi.org/10.1115/1.1501918
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Second-Moment Closure Model for IC Engine Flow Simulation Using Kiva Code
J. Eng. Gas Turbines Power (April,2000)
Experimental Investigation to Study Convective Mixing, Spatial Uniformity, and Cycle-to-Cycle Variation During the Intake Stroke in an IC Engine
J. Eng. Gas Turbines Power (July,2000)
High-Resolution Scalar and Velocity Measurements in an Internal Combustion Engine
J. Eng. Gas Turbines Power (September,2010)
Related Proceedings Papers
Related Chapters
Physiology of Human Power Generation
Design of Human Powered Vehicles
Antilock-Braking System Using Fuzzy Logic
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Introduction I: Role of Engineering Science
Fundamentals of heat Engines: Reciprocating and Gas Turbine Internal Combustion Engines