In many applications of supersonic injection devices, three-dimensional computation that can model a complex supersonic jet has become critical. However, in spite of its increasing necessity, it is computationally costly to capture the details of supersonic structures in intricate three-dimensional geometries with moving boundaries. In large-bore stationary natural gas fueled engine research, one of the most promising mixing enhancement technologies currently used for natural gas engines is high-pressure fuel injection. Consequently, this creates considerable interest in three-dimensional computational simulations that can examine the entire injection and mixing process in engines using high-pressure injection and can determine the impact of injector design on engine performance. However, the cost of three-dimensional engine simulations—including a moving piston and the kinetics of combustion and pollutant production—quickly becomes considerable in terms of simulation time requirements. One limiting factor is the modeling of the small length scales of the poppet valve flow. Such length scales can be three orders of magnitude smaller than cylinder length scales. The objective of this paper is to describe the development of a methodology for the design of a simple geometry supersonic virtual valve that can be substituted in three-dimensional numerical models for the complex shrouded poppet valve injection system actually installed in the engine to be simulated. Downstream flow characteristics of the jets from an actual valve and various virtual valves are compared. Relevant mixing parameters, such as local equivalent ratio and turbulence kinetic energy, are evaluated in full-scale moving piston simulations that include the effect of the jet-piston interaction. A comparison of the results has indicated that it is possible to design a simple converging-diverging fuel nozzle that will produce the same jet and, subsequently, the same large-scale and turbulent-scale mixing patterns in the engine cylinder as a real poppet valve.
Skip Nav Destination
Article navigation
October 2007
Technical Papers
Supersonic Virtual Valve Design for Numerical Simulation of a Large-Bore Natural Gas Engine
Gi-Heon Kim,
Gi-Heon Kim
National Renewable Energy Laboratory
, Golden, CO 80401
Search for other works by this author on:
Allan Kirkpatrick,
Allan Kirkpatrick
Department of Mechanical Engineering,
Colorado State University
, Fort Collins, CO 80523
Search for other works by this author on:
Charles Mitchell
Charles Mitchell
Department of Mechanical Engineering,
Colorado State University
, Fort Collins, CO 80523
Search for other works by this author on:
Gi-Heon Kim
National Renewable Energy Laboratory
, Golden, CO 80401
Allan Kirkpatrick
Department of Mechanical Engineering,
Colorado State University
, Fort Collins, CO 80523
Charles Mitchell
Department of Mechanical Engineering,
Colorado State University
, Fort Collins, CO 80523J. Eng. Gas Turbines Power. Oct 2007, 129(4): 1065-1071 (7 pages)
Published Online: February 20, 2007
Article history
Received:
August 16, 2005
Revised:
February 20, 2007
Citation
Kim, G., Kirkpatrick, A., and Mitchell, C. (February 20, 2007). "Supersonic Virtual Valve Design for Numerical Simulation of a Large-Bore Natural Gas Engine." ASME. J. Eng. Gas Turbines Power. October 2007; 129(4): 1065–1071. https://doi.org/10.1115/1.2747251
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Computational Modeling of Natural Gas Injection in a Large Bore Engine
J. Eng. Gas Turbines Power (July,2004)
Active Combustion Instability Control With Spinning Valve Actuator
J. Eng. Gas Turbines Power (October,2003)
Application of Silicon Carbide Photodiode Flame Temperature Sensors in an Active Combustion Pattern Factor Control System
J. Eng. Gas Turbines Power (January,2011)
Modeling Mixture Formation in a Gasoline Direct Injection Engine
J. Appl. Mech (November,2006)
Related Proceedings Papers
Related Chapters
A Simple Carburetor
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Piston Aeroengines
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students