It is well known that the process of vortex breakdown plays an important role in establishing the near-field aerodynamic characteristics of fuel injectors, influencing fuel/air mixing and flame stability. The precise nature of the vortex breakdown can take on several forms, which have been shown in previous papers to include both a precessing vortex core (PVC) and the appearance of multiple helical vortices formed in the swirl stream shear layer. The unsteady dynamics of these particular features can play an important role in combustion induced oscillations. The present paper reports an experimental investigation, using particle image velocimetry (PIV) and hot-wire anemometry, to document variations in the relative strength of PVC and helical vortex patterns as the configuration of a generic fuel injector is altered. Examples of geometric changes that have been investigated include: the combination of an annular swirl stream with and without a central jet; variation in geometric details of the swirler passage, e.g., alteration in the swirler entry slots to change swirl number, and variations in the area ratio of the swirler passage. The results show that these geometric variations can influence: the axial location of the origin of the helical vortices (from inside to outside the fuel injector), and the strength of the PVC. For example, in a configuration with no central jet (swirl number ), the helical vortex pattern was much less coherent, but the PVC was much stronger than when a central jet was present. These changes modify the magnitude of the turbulence energy in the fuel injector near field dramatically, and hence have an important influence on fuel air mixing patterns.
Skip Nav Destination
Article navigation
March 2008
Research Papers
Vortex Breakdown in Swirling Fuel Injector Flows
Adrian Spencer,
Adrian Spencer
Department of Aeronautical and Automotive Engineering,
Loughborough University
, Loughborough, Leicestershire LE11 3TU, U.K.
Search for other works by this author on:
James J. McGuirk,
James J. McGuirk
Department of Aeronautical and Automotive Engineering,
Loughborough University
, Loughborough, Leicestershire LE11 3TU, U.K.
Search for other works by this author on:
Kris Midgley
Kris Midgley
Search for other works by this author on:
Adrian Spencer
Department of Aeronautical and Automotive Engineering,
Loughborough University
, Loughborough, Leicestershire LE11 3TU, U.K.
James J. McGuirk
Department of Aeronautical and Automotive Engineering,
Loughborough University
, Loughborough, Leicestershire LE11 3TU, U.K.
Kris Midgley
J. Eng. Gas Turbines Power. Mar 2008, 130(2): 021503 (8 pages)
Published Online: January 22, 2008
Article history
Received:
May 1, 2007
Revised:
July 4, 2007
Published:
January 22, 2008
Citation
Spencer, A., McGuirk, J. J., and Midgley, K. (January 22, 2008). "Vortex Breakdown in Swirling Fuel Injector Flows." ASME. J. Eng. Gas Turbines Power. March 2008; 130(2): 021503. https://doi.org/10.1115/1.2799530
Download citation file:
Get Email Alerts
Blade Excitation Alleviation of a Nozzleless Radial Turbine by Casing Treatment Based on Reduced Order Mode
J. Eng. Gas Turbines Power
Design And Testing of a Compact, Reverse Brayton Cycle, Air (R729) Cooling Machine
J. Eng. Gas Turbines Power
Experimental Study on Liquid Jet Trajectory in Cross Flow of Swirling Air at Elevated Pressure Condition
J. Eng. Gas Turbines Power
Related Articles
Effect of Fuel System Impedance Mismatch on Combustion Dynamics
J. Eng. Gas Turbines Power (January,2008)
Unsteady Flow Structures in Radial Swirler Fed Fuel Injectors
J. Eng. Gas Turbines Power (October,2005)
Optimization of the Aerodynamic Flame Stabilization for Fuel Flexible Gas Turbine Premix Burners
J. Eng. Gas Turbines Power (October,2011)
Flashback Limits for Combustion Induced Vortex Breakdown in a Swirl Burner
J. Eng. Gas Turbines Power (July,2003)
Related Chapters
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
The Identification of the Flame Combustion Stability by Combining Principal Component Analysis and BP Neural Network Techniques
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students