Current technology of thermal barrier coating systems used in gas turbine blade applications relies on the use of a metallic bond coat, which has a twofold function: (i) it develops a thin layer of aluminum oxide enhancing the adhesion of the ceramic top coat and (ii) it provides an additional resistance to oxidation. It was the objective of this study to develop an understanding of the role of platinum in bond coats of the diffusion-type deposited on a nickel-based superalloy. Two Pt-containing bond coats were included in the study: (i) a platinum-aluminide and (ii) a bond coat formed by interdiffusion between an electroplated layer of platinum and the superalloy substrate. In both cases, the top ceramic coat was yttria-stabilized zirconia. For reference purposes, a simple aluminide bond coat free of Pt was also included in the study. Thermal exposure tests at with a 24 h cycling period at room temperature were used to compare the coating performance. Microstructural features were characterized by various electron-optical techniques. Experimental results indicated that Pt acts as a “cleanser” of the oxide-bond coat interface by decelerating the kinetics of interdiffusion between the bond coat and superalloy substrate. This was found to promote selective oxidation of Al resulting in a purer scale of a slower growth rate increasing its effectiveness as “glue” holding the ceramic top coat to the underlying metallic substrate. However, the exact effect of Pt was found to be a function of the state of its presence within the outermost coating layer. Of the two bond coats studied, a surface layer of Pt-rich gamma prime phase ( superlattice) was found to provide longer coating life in comparison with a mixture of and beta phase. This could be related to the effectiveness of gamma prime phase as a sink for titanium minimizing its detrimental effect on the adherence of aluminum oxide.
Skip Nav Destination
Article navigation
February 2010
Research Papers
Role of Platinum in Thermal Barrier Coatings Used in Gas Turbine Blade Applications
H. M. Tawancy,
H. M. Tawancy
Center for Engineering Research, Research Institute,
King Fahd University of Petroleum and Minerals
, P.O. Box 1639, Dhahran 31261, Saudi Arabia
Search for other works by this author on:
Luai M. Al-Hadhrami
Luai M. Al-Hadhrami
Center for Engineering Research, Research Institute,
King Fahd University of Petroleum and Minerals
, P.O. Box 1639, Dhahran 31261, Saudi Arabia
Search for other works by this author on:
H. M. Tawancy
Center for Engineering Research, Research Institute,
King Fahd University of Petroleum and Minerals
, P.O. Box 1639, Dhahran 31261, Saudi Arabia
Luai M. Al-Hadhrami
Center for Engineering Research, Research Institute,
King Fahd University of Petroleum and Minerals
, P.O. Box 1639, Dhahran 31261, Saudi ArabiaJ. Eng. Gas Turbines Power. Feb 2010, 132(2): 022103 (6 pages)
Published Online: November 5, 2009
Article history
Received:
March 19, 2009
Revised:
April 12, 2009
Online:
November 5, 2009
Published:
November 5, 2009
Citation
Tawancy, H. M., and Al-Hadhrami, L. M. (November 5, 2009). "Role of Platinum in Thermal Barrier Coatings Used in Gas Turbine Blade Applications." ASME. J. Eng. Gas Turbines Power. February 2010; 132(2): 022103. https://doi.org/10.1115/1.3156814
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Comparative Performance of a Thermal Barrier Coating System Utilizing Platinum Aluminide Bond Coat on Alloys CMSX-4 ® and MAR M ® 002DS
J. Eng. Gas Turbines Power (January,2012)
Influence of Titanium in Nickel-Base Superalloys on the Performance of Thermal Barrier Coatings Utilizing γ − γ ′ Platinum Bond Coats
J. Eng. Gas Turbines Power (April,2011)
Improved Performance Rhenium Containing Single Crystal Alloy Turbine Blades Utilizing PPM Levels of the Highly Reactive Elements Lanthanum and Yttrium
J. Eng. Gas Turbines Power (January,1999)
Microstructural Features Resulting From Isothermal and Thermocyclic Exposure of a Thermal Barrier Coating
J. Eng. Mater. Technol (July,2000)
Related Proceedings Papers
Related Chapters
Surface Analysis and Tools
Tribology of Mechanical Systems: A Guide to Present and Future Technologies
Erosion-Corrosion of Coatings and Superalloys in High-Velocity Hot Gases
Erosion: Prevention and Useful Applications
E110opt Fuel Cladding Corrosion under PWR Conditions
Zirconium in the Nuclear Industry: 20th International Symposium