A frequently employed method for aerodynamic flame stabilization in modern premixed low emission combustors is the breakdown of swirling flows; with carefully optimized tailoring of the swirler, a sudden transition in the flow field in the combustor can be achieved. A central recirculation zone evolves at the cross-sectional area change located at the entrance of the combustion chamber and anchors the flame in a fixed position. In general, premixed combustion in swirling flows can lead to flame flashback that is caused by combustion induced vortex breakdown near the centerline of the flow. In this case, the recirculation zone suddenly moves upstream and stabilizes in the premix zone (Kröner , 2007, “Flame Propagation in Swirling Flows—Effect of Local Extinction on the Combustion Induced Vortex Breakdown,” Combust. Sci. Technol., 179, pp. 1385–1416). This type of flame flashback is caused by a strong interaction between the flame chemistry and vortex dynamics. The analysis of the vorticity transport equation shows that the axial gradient of the azimuthal vorticity is of particular importance for flame stability. A negative azimuthal vorticity gradient decelerates the core flow and finally causes vortex breakdown. Based on fundamental fluid mechanics, guidelines for a proper aerodynamic design of gas turbine combustors are given. These guidelines summarize the experience from several previous aerodynamic and combustion studies of the authors.
Skip Nav Destination
e-mail: stephan@burmberger.com
Article navigation
October 2011
Research Papers
Optimization of the Aerodynamic Flame Stabilization for Fuel Flexible Gas Turbine Premix Burners
Stephan Burmberger,
Stephan Burmberger
Lehrstuhl für Thermodynamik,
e-mail: stephan@burmberger.com
Technische Universität München
, Boltzmannstraße 15, 85748 Garching, Germany
Search for other works by this author on:
Thomas Sattelmayer
Thomas Sattelmayer
Lehrstuhl für Thermodynamik,
Technische Universität München
, Boltzmannstraße 15, 85748 Garching, Germany
Search for other works by this author on:
Stephan Burmberger
Lehrstuhl für Thermodynamik,
Technische Universität München
, Boltzmannstraße 15, 85748 Garching, Germanye-mail: stephan@burmberger.com
Thomas Sattelmayer
Lehrstuhl für Thermodynamik,
Technische Universität München
, Boltzmannstraße 15, 85748 Garching, GermanyJ. Eng. Gas Turbines Power. Oct 2011, 133(10): 101501 (10 pages)
Published Online: April 25, 2011
Article history
Received:
May 10, 2010
Revised:
December 2, 2010
Online:
April 25, 2011
Published:
April 25, 2011
Citation
Burmberger, S., and Sattelmayer, T. (April 25, 2011). "Optimization of the Aerodynamic Flame Stabilization for Fuel Flexible Gas Turbine Premix Burners." ASME. J. Eng. Gas Turbines Power. October 2011; 133(10): 101501. https://doi.org/10.1115/1.4003164
Download citation file:
Get Email Alerts
Image-based flashback detection in a hydrogen-fired gas turbine using a convolutional autoencoder
J. Eng. Gas Turbines Power
Fuel Thermal Management and Injector Part Design for LPBF Manufacturing
J. Eng. Gas Turbines Power
An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen
J. Eng. Gas Turbines Power
Related Articles
Flashback Limits for Combustion Induced Vortex Breakdown in a Swirl Burner
J. Eng. Gas Turbines Power (July,2003)
Vortex Breakdown in Swirling Fuel Injector Flows
J. Eng. Gas Turbines Power (March,2008)
Second-Generation Low-Emission Combustors for ABB Gas Turbines: Burner Development and Tests at Atmospheric Pressure
J. Eng. Gas Turbines Power (January,1992)
Further Characterization of the Disturbance Field in a Transversely Excited Swirl-Stabilized Flame
J. Eng. Gas Turbines Power (January,2012)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Alternative Systems
Turbo/Supercharger Compressors and Turbines for Aircraft Propulsion in WWII: Theory, History and Practice—Guidance from the Past for Modern Engineers and Students
Augmentation of Turbulence and Mixing in Gas Turbine Combustors by Introducing Unsteady Effects
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)