It is well known that parametric vibrations may appear during the rotation of a rotor with a cracked shaft. The vibrations occur due to periodic stiffness changes being the result of the crack breathing. A parametrically excited system may exhibit parametric resonances and antiresonances affecting the stability of the system. In most cases the destabilizing effect due to parametric resonances is studied. Antiresonant cases seem to be uninteresting. However, the antiresonances have a unique property of introducing additional artificial damping to the system, thus improving its stability and reducing the vibration amplitude. Apart from different control applications, this stabilizing effect may be interesting for its probable ability to indicate the shaft crack. The possible application of the additional damping introduced by parametric excitation for the shaft crack detection is analyzed in the present paper. The approach is demonstrated with a mathematical model of a rotor with a cracked shaft. The stability analysis of the rotor is performed analytically by employing the averaging method. Stability boundaries for different frequencies of the parametric excitation and for different crack depths are derived. The results of this analysis are checked numerically by means of the Floquet's theory. Next, possible applications of the parametric excitation for the shaft crack detection are validated numerically.
Skip Nav Destination
Article navigation
Research-Article
Stability of a Cracked Rotor Subjected to Parametric Excitation
Jerzy T. Sawicki,
Jerzy T. Sawicki
Fellow ASME
Center for Rotating Machinery Dynamics
and Control,
e-mail: j.sawicki@csuohio.edu
Center for Rotating Machinery Dynamics
and Control,
Cleveland State University
,Cleveland, OH 44115-2214
e-mail: j.sawicki@csuohio.edu
Search for other works by this author on:
Zbigniew Kulesza
Zbigniew Kulesza
Faculty of Mechanical Engineering,
e-mail: z.kulesza@pb.edu.pl
Bialystok University of Technology
,Bialystok 15-351
, Poland
e-mail: z.kulesza@pb.edu.pl
Search for other works by this author on:
Jerzy T. Sawicki
Fellow ASME
Center for Rotating Machinery Dynamics
and Control,
e-mail: j.sawicki@csuohio.edu
Center for Rotating Machinery Dynamics
and Control,
Cleveland State University
,Cleveland, OH 44115-2214
e-mail: j.sawicki@csuohio.edu
Zbigniew Kulesza
Faculty of Mechanical Engineering,
e-mail: z.kulesza@pb.edu.pl
Bialystok University of Technology
,Bialystok 15-351
, Poland
e-mail: z.kulesza@pb.edu.pl
Contributed by the Structures and Dynamics Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received September 16, 2014; final manuscript received September 30, 2014; published online December 2, 2014. Editor: David Wisler.
J. Eng. Gas Turbines Power. May 2015, 137(5): 052508 (8 pages)
Published Online: May 1, 2015
Article history
Received:
September 16, 2014
Revision Received:
September 30, 2014
Online:
December 2, 2014
Citation
Sawicki, J. T., and Kulesza, Z. (May 1, 2015). "Stability of a Cracked Rotor Subjected to Parametric Excitation." ASME. J. Eng. Gas Turbines Power. May 2015; 137(5): 052508. https://doi.org/10.1115/1.4028742
Download citation file:
Get Email Alerts
Cited By
An Experimental Comparison of Methanol Combustion Strategies: Spark Ignition Versus Compression Ignition
J. Eng. Gas Turbines Power
Systems-Based Approach To Predicting Tbc Delamination Due To Cmas Infiltration
J. Eng. Gas Turbines Power
Related Articles
Material Selection Issues for a Nozzle Guide Vane Against Service-Induced Failure
J. Eng. Gas Turbines Power (May,2017)
A Reduced Order Modeling Methodology for Steam Turbine Clearance Control Design
J. Eng. Gas Turbines Power (September,2017)
Dynamics of Slant Cracked Rotor for a Steam Turbine Generator System
J. Eng. Gas Turbines Power (June,2017)
Parametrically Induced Damping in a Cracked Rotor
J. Eng. Gas Turbines Power (January,2017)
Related Chapters
Concluding Remarks and Future Work
Ultrasonic Welding of Lithium-Ion Batteries
Fluidelastic Instability of Tube Bundles in Single-Phase Flow
Flow-Induced Vibration Handbook for Nuclear and Process Equipment
Fatigue Analysis in the Connecting Rod of MF285 Tractor by Finite Element Method
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)