An investigation of thermocapillary effects on heated menisci formed by volatile liquids in capillary pumped heat transfer devices has been conducted. This research was motivated by the importance of the evaporation process from porous or grooved media integral to the operation of capillary pumped heat transport devices such as heat pipes and capillary pumped loops. From analysis, a criteria was established which predicts the thermal conditions at which the destablizing influences of thermocapillary stresses near the contact line of a heated and evaporating meniscus cause the meniscus to become unstable. Experimentally, two different idealized models of capillary pumped phase change loops were investigated to assess the suitability of the predictions. Correspondence between theory and experiment was observed. Given the observed dry-out of the evaporator at higher heat inputs after the meniscus becomes unstable, the importance of predicting the conditions at the instability onset is made clear.
Issue Section:
Heat Pipes
Topics:
Evaporation,
Flow (Dynamics),
Heat,
Heat pipes,
Heat transfer,
Porous materials,
Stability,
Stress
1.
Bankoff
S. G.
1995
, “Stability and Dynamics of Thin Heated Liquid Films
,” Transport Phenomena in Thermal Engineering
, Vol. 1
, Begell House, NY, pp. 9
–17
.2.
Baumann, J., 1994, “Loop Heat Pipe Technology Performance Evaluation,” Martin Marietta Astronautics Group Internal Report No. D-19D-93-01, Martin Marietta Astronautics Group, Denver, CO.
3.
Brown, J. R., 1995, “Effect of Interfacial Dynamics on the Heat Transfer of an Evaporating Menisucus,” Ph.D. dissertation, University of Dayton, Dayton, OH.
4.
Burelbach
J. P.
Bankoff
S. G.
Davis
S. H.
1988
, “Nonlinear Stability of Evaporating/Condensing Liquid Films
,” Journal of Fluid Mechanics
, Vol. 195
, pp. 463
–494
.5.
Chi, S. W., 1976, Heat Pipe Theory and Practices, A Source Book, McGraw-Hill, New York.
6.
Cullimore, B., 1993, “Capillary Pumped Loop Application Guide,” SAE Technical Paper Series, Paper No. 932156.
7.
Dickey
J. T.
Peterson
G. P.
1994
, “Experimental and Analytical Investigation of a Capillary Pumped Loop
,” Journal of Thermophysics and Heat Transfer
, Vol. 8
, No. 3
, pp. 602
–607
.8.
Dunn, P. D. and Reay, D. A., 1994, Heat Pipes, 4th ed., BPCC Wheatons LTD, Exeter, Great Britain.
9.
Faghri, A., 1995, Heat Pipe Science and Technology, Taylor and Francis, Washington, D.C.
10.
He, Q., and Hallinan, K. P., 1996, “The Development of a Full-Field Three-Dimensional Flow Measurement Technique for Applications to Near Contact Line Flows,” presented at the Microgravity Fluids Conference, Cleveland, OH.
11.
He, Q., 1994, Personal Communication, University of Dayton, Dayton, OH.
12.
Hoang, T., and Ku, J., 1995, “Theory of Hydrodynamic Stability of a Capillary Pumped Loop,” Proceeding of the 30th 1995 National Heat Transfer Conference, HTD-Vol. 307, ASME, NY, pp. 33–40.
13.
Joo
S. W.
Davis
S. H.
Bankoff
S. G.
1991
, “Long-Wave Instabilities of Heated Falling Films: Two-Dimensional Theory of Uniform Layer
,” Journal of Fluid Mechanics
, Vol. 230
, pp. 117
–146
.14.
Ku
J.
1993
, “Overview of Capillary Pumped Loops
,” Heat Pipes and Capillary Pumped Loops
, HTD-Vol. 236
, ASME, NY, pp. 1
–17
.15.
Ku, J., Kroliczek, E. J., McCabe, M., and Benner, S. M., 1988, “A High Power Spacecraft Thermal Management System,” AIAA Paper No. 88-2702.
16.
Ku, J., 1995, “Start-Up Issues in Capillary Pumped Loops,” presented at the 9th International Heat Pipe Conference, Albuquerque, New Mexico.
17.
Ku, J. and Hoang, T., 1995, “An Experimental Study of Pressure Oscillation and Hydrodynamic Stability in a Capillary Pumped Loop,” Proceeding of the 30th 1995 National Heat Transfer Conference, HTD-Vol. 307, ASME, NY, pp. 25–32.
18.
Maidanik, Y. F., Vershinin, S. V., Kholodov, V. F., and Dolgirev, Y. D., 1985, Heat Transfer Apparatus. U.S. Patent No. 4,515,209.
19.
Maidanik, Y., Solodovnik, N., and Fershtater, Y., 1995, “Investigation of Dynamic and Stationary Characteristics of a Loop Heat Pipe,” presented at the 9th International Heat Pipe Conference, Albuquerque, NM.
20.
Mirzamoghadam
A.
Catton
I.
1988
, “A Physical Model of the Evaporating Meniscus
,” ASME JOURNAL OF HEAT TRANSFER
, Vol. 110
, pp. 201
–204
.21.
Neogi
P.
Berryman
J. B.
1982
, “Stability of Thin Liquid Films Evaporating into Saturated Vapor
,” Journal of Colloid and Interface Science
, Vol. 88
, pp. 100
–109
.22.
Palmer
H. J.
1976
, “The Hydrodynamic Stability of Rapidly Evaporating Liquids at Reduced Pressure
,” Journal of Fluid Mechanics
, Vol. 75
, pp. 487
–511
.23.
Pratt, D. M., 1996, “The Effects of Thermocapillary Stresses on the Wetting Characteristics, Heat Transfer Effectiveness, and Stability of an Evaporating, Capillary Re-Supplied, Curved Meniscus within a Capillary Tube,” Ph.D. dissertation, University of Dayton, Dayton, OH.
24.
Preiss
G.
Wayner
P. C.
1976
, “Evaporation From a Capillary Tube
,” ASME JOURNAL OF HEAT TRANSFER
, Vol. 98
, pp. 178
–181
.25.
Richter
R.
Gottschlich
J. M.
1994
, “Thermodynamic Aspects of Heat Pipe Operation
,” Journal of Thermophysics and Heal Transfer
, Vol. 8
, No. 2
, pp. 334
–340
.26.
Ruckenstein
E.
Jain
R. K.
1974
, “Spontaneous Rupture of Thin Liquid Films
,” Journal of Chemical Society, Faraday Transactions 2
, Vol. 70
, pp. 132
–147
.27.
Sharma
A.
Ruckenstein
E.
1988
, “Dynamics and Lifetimes of Thin Evaporating Liquid Films: Some Non-Linear Effects
,” PhysicoChemical Hydrodynamics
, Vol. 10
, No. 5/6
, pp. 675
–691
.28.
Valociek, D. A., 1994, “The Effect of Low Frequency Vibrations on an Evaporating Meniscus For a Near Perfect Wetting Fluid,” Masters thesis, University of Dayton, Dayton, OH.
29.
Welter, D., 1991, “The Effects of Evaporation on the Dynamic Capillary Pressure in Heat Pipes,” M.S.M.E. thesis, University of Dayton, Dayton, OH.
30.
Williams
M. B.
Davis
S. H.
1982
, “Nonlinear Theory of Film Rupture
,” Journal of Colloid and Interface Science
, Vol. 90
, No. 1
, pp. 220
–228
.
This content is only available via PDF.
Copyright © 1998
by The American Society of Mechanical Engineers
You do not currently have access to this content.
