Accurate on-line forecasting of a tool’s condition during end-milling operations is advantageous to the functionality and reliability of automated industrial processes. The ability to disengage the tool prior to catastrophic failure reduces manufacturing costs, excessive machine deterioration, and personnel hazards. Rapid computational feedback describing the system’s state is critical for realizing a practical failure forecasting model. To this end, spectral analysis by fast Fourier type algorithms allows a rapid computational response. The research described herein explores the development of nontraditional real fast Fourier transform (discrete cosine transform) based algorithms performed in unique higher-dimensional states of observed data sets. Moreover, the developed Fourier algorithm quantifies chaotic noise rather than relying on the more traditional observation of system energy. By increasing the vector dimensionality of the discrete cosine transform, the respective linear transform basis more effectively cross correlates the transform data into fewer (more significant) transform coefficients. Thus, a single vector in orthogonally higher-dimensional space is observed instead of multiple orthogonal vectors in single-dimensional space. More specifically, a novel modal reduction technique is utilized to track trends measured from triaxial force dynamometer signals. This transformation effectively achieves both modal reduction and directional independence by observing the chaotic noise instead of system energy. Algorithm output trends from six end-milling life tests are tracked from both linear and pocketing maneuvers in order to demonstrate the technique’s capabilities. In all six tests, the algorithm predicts impending tool failure with sufficient time for tool removal.
Directionally Independent Failure Prediction of End-Milling Tools by Tracking Increasing Chaotic Noise at the Machining Frequencies Due to Wear
- Views Icon Views
- Share Icon Share
- Search Site
Suprock, C. A., and Roth, J. T. (May 6, 2008). "Directionally Independent Failure Prediction of End-Milling Tools by Tracking Increasing Chaotic Noise at the Machining Frequencies Due to Wear." ASME. J. Manuf. Sci. Eng. June 2008; 130(3): 031006. https://doi.org/10.1115/1.2844589
Download citation file: