In this paper the simplified mechanical model for a machine-tool system is presented. The state and domains are defined with respect to the (contact and frictional force) boundaries in this system. The switching sets for this machine-tool will be defined for all the boundaries considered herein. The forces and force product components at the switching points are determined according to discontinuous systems theory. The forces and force product govern the passability of the machine-tool through the respective boundary. Mapping definitions and notations are developed through the switching sets for the boundaries. A mapping structure and notation for one type of intermittent cutting periodic motion is defined as an example.
Issue Section:
Research Papers
1.
Rubenstein
, C.
, and Storie
, R. M.
, 1969, “The Cutting of Polymers
,” Int. J. Mach. Tool Des. Res.
0020-7357, 9
, pp. 117
–130
.2.
Basuray
, P. M.
, 1977, “Transition From Ploughing to Cutting During Machining With Blunt Tools
,” Wear
0043-1648, 43
, pp. 341
–349
.3.
Kannatey-Asibu
, E.
, Jr., and Dornfeld
, D. A.
, 1982, “A Study of Tool Wear Using Statistical Analysis of Metal-Cutting Acoustic Emission
,” Wear
0043-1648, 76
, pp. 247
–261
.4.
Grabec
, I.
, 1986, “Chaos Generated by the Cutting Process
,” Phys. Lett. A
0375-9601, 117
(8
), pp. 384
–386
.5.
Grabec
, I.
, 1988, “Chaotic Dynamics of the Cutting Process
,” Int. J. Mach. Tools Manuf.
0890-6955, 28
, pp. 19
–32
.6.
Chin
, J. H.
, and Chen
, C. C.
, 1993, “A Study of Stick-Slip Motion and Its Influence on the Cutting Process
,” Int. J. Mech. Sci.
0020-7403, 35
(5
), pp. 353
–370
.7.
Tarng
, Y. S.
, Young
, H. T.
, and Lee
, B. Y.
, 1994, “An Analytical Model of Chatter Vibration in Metal Cutting
,” Int. J. Mach. Tools Manuf.
0890-6955, 34
(2
), pp. 183
–197
.8.
Chandrasekaran
, H.
, and Thoors
, H.
, 1994, “Tribology in Interrupted Machining: Role of Interruption Cycle and Work Material
,” Wear
0043-1648, 179
, pp. 83
–88
.9.
Wiercigroch
, M.
, and Cheng
, A.
, 1997, “Chaotic and Stochastic Dynamics of Orthogonal Metal Cutting
,” Chaos, Solitons Fractals
0960-0779, 8
, pp. 715
–726
.10.
Wiercigroch
, M.
, 1997, “Chaotic Vibration of a Simple Model of the Machine Tool-Cutting Process System
,” ASME J. Vibr. Acoust.
0739-3717, 119
, pp. 468
–475
.11.
Chou
, Y. K.
, and Evans
, C. J.
, 1999, “Cubic Boron Nitride Tool Wear in Interrupted Hard Cutting
,” Wear
0043-1648, 225–229
, pp. 234
–245
.12.
Maity
, K. P.
, and Das
, N. S.
, 2001, “A Class of Slipline Field Solutions for Metal Machining With Slipping and Sticking Contact at the Chip-Tool Interface
,” Int. J. Mech. Sci.
0020-7403, 43
, pp. 2435
–2452
.13.
Wiercigroch
, M.
, and Budak
, E.
, 2001, “Sources of Nonlinearities, Chatter Generation and Suppression in Metal Cutting
,” Philos. Trans. R. Soc. London, Ser. A
0962-8428, 359
, pp. 663
–693
.14.
Moon
, F. C.
, and Kalmár-Nagy
, T.
, 2001, “Nonlinear Models for Complex Dynamics in Cutting Materials
,” Philos. Trans. R. Soc. London, Ser. A
0962-8428, 359
, pp. 695
–711
.15.
Sutter
, G.
, 2005, “Chip Geometries During High-Speed Machining for Orthogonal Cutting Conditions
,” Int. J. Mach. Tools Manuf.
0890-6955, 45
, pp. 719
–726
.16.
Simoneau
, A.
, Ng
, E.
, and Elbestawi
, M. A.
, 2006, “Chip Formation During Microscale Cutting of a Medium Carbon Steel
,” Int. J. Mach. Tools Manuf.
0890-6955, 46
, pp. 467
–481
.17.
Chandiramani
, N. K.
, and Pothala
, T.
, 2006, “Dynamics of 2-DOF Regenerative Chatter During Turning
,” J. Sound Vib.
0022-460X, 290
, pp. 448
–464
.18.
Richard
, T.
, Germay
, C.
, and Detournay
, E.
, 2004, “Self-Excited Stick-Slip Oscillations of Drill Bits
,” C. R. Mec.
1631-0721, 332
, pp. 619
–626
.19.
Gegg
, B. C.
, Suh
, C. S.
, and Luo
, A. C. J.
, 2007, “Periodic Motions of the Machine Tools in Cutting Process
,” ASME Paper No. DETC2007/VIB-35166.20.
Woon
, K. S.
, Rahman
, M.
, Neo
, K. S.
, and Liu
, K.
, 2008, “The Effect of Tool Edge Radius on The Contact Phenomenon of Tool-Based Micromachining
,” Int. J. Mach. Tools Manuf.
0890-6955, 48
(12–13
), pp. 1395
–1407
.21.
Wahi
, P.
, and Chatterjee
, A.
, 2008, “Self-Interrupted Regenerative Metal Cutting in Turning
,” Int. J. Non-Linear Mech.
0020-7462, 43
, pp. 111
–123
.22.
Gegg
, B. C.
, Suh
, C. S.
, and Luo
, A. C. J.
, 2008, “Chip Stick and Slip Periodic Motions of a Machine Tool in the Cutting Process
,” ASME Paper No. MSEC ICMP2008/DYN-72052.23.
Luo
, A. C.
, 2005, “A Theory For Non-Smooth Dynamical Systems on Connectable Domains
,” Commun. Nonlinear Sci. Numer. Simul.
1007-5704, 10
, pp. 1
–55
.24.
Luo
, A. C. J.
, and Gegg
, B. C.
, 2004, “On the Mechanism of Stick and Non-Stick, Periodic Motions in a Forced Linear Oscillator Including Dry Friction
,” ASME Paper No. IMECE2004-59218.25.
Luo
, A. C. J
, and Gegg
, B. C.
, 2006, “Periodic Motions in a Periodically Forced Oscillator Moving on an Oscillating Belt With Dry Friction
,” ASME J. Comput. Nonlinear Dyn.
1555-1423, 1
, pp. 212
–220
.Copyright © 2010
by American Society of Mechanical Engineers
You do not currently have access to this content.