Abstract
Surface errors due to force-induced tool and workpiece deflections are one of the major errors in multi-axis machining of parts especially with thin-walled structures. Dominant approaches to reduce these surface errors are re-machining the part, feed scheduling, and tool path modification. These methods are time consuming and computationally costly, and they rely on experimental data which is used in cutting force and deflection predictions. The present paper introduces a pure geometrical approach to reduce surface errors drastically by minimizing the engagement lengths of flutes’ cutting edges when a point on the flute’s cutting edge is in contact with the design surface. The total engagement length of the flutes’ cutting edges when one of them generates a contact point on the workpiece surface is formulated and considered as the minimization objective function of an optimization problem. Tilt and lead angles, which define the tool orientation, are the design variables of the optimization problem subjected to constraints based on the geometrical requirements of the ball end milling process. The optimization problem uses the nominal tool path to generate an optimal tool path with adjusted tool orientations. The presented method is computationally inexpensive and does not need any experimentally calibrated coefficients to predict cutting forces because of the pure geometrical nature of the approach. The method is experimentally validated through five-axis ball end milling experiments in which more than 90% surface error reduction is achieved.
