Volume 122 Issue 3 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 122, Issue 3

August 2000

ISSN 1087-1357

EISSN 1528-8935

Technical Papers

Evaluating Cutting Fluid Effects on Cylinder Boring Surface Errors by Inverse Heat Transfer and Finite Element Methods

Y. Zheng, H. Li, W. W. Olson, J. W. Sutherland

J. Manuf. Sci. Eng. August 2000, 122(3): 377–383. doi: https://doi.org/10.1115/1.1285865

Abstract

View articletitled, Evaluating Cutting Fluid Effects on Cylinder Boring Surface Errors by Inverse Heat Transfer and Finite Element Methods

Open the PDF for in another window

Topics: Cutting , Cylinders , Errors , Fluids , Heat transfer , Heat , Convection , Temperature

A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool

Jairam Manjunathaiah, William J. Endres

J. Manuf. Sci. Eng. August 2000, 122(3): 384–390. doi: https://doi.org/10.1115/1.1285886

Abstract

View articletitled, A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool

Open the PDF for in another window

Topics: Cutting , Deformation , Machining , Shear (Mechanics) , Shear stress

Analytical Stability Analysis of Variable Spindle Speed Machining

S. Jayaram, S. G. Kapoor, R. E. DeVor

J. Manuf. Sci. Eng. August 2000, 122(3): 391–397. doi: https://doi.org/10.1115/1.1285890

Abstract

View articletitled, Analytical Stability Analysis of Variable Spindle Speed Machining

Open the PDF for in another window

Topics: Machining , Stability , Dynamics (Mechanics) , Trajectories (Physics)

A Mechanistic Force Model for Contour Turning

Rohit G. Reddy, Shiv G. Kapoor, Richard E. DeVor

J. Manuf. Sci. Eng. August 2000, 122(3): 398–405. doi: https://doi.org/10.1115/1.1285900

Abstract

View articletitled, A Mechanistic Force Model for Contour Turning

Open the PDF for in another window

Topics: Calibration , Cutting , Stress , Machining , Turning , Model validation , Simulation

Hard Turning: Chip Formation Mechanisms and Metallurgical Aspects

Ge´rard Poulachon, Alphonse L. Moisan

J. Manuf. Sci. Eng. August 2000, 122(3): 406–412. doi: https://doi.org/10.1115/1.1285891

Abstract

View articletitled, Hard Turning: Chip Formation Mechanisms and Metallurgical Aspects

Open the PDF for in another window

Topics: Cutting , Fracture (Materials) , Steel , Vickers hardness testing , Die cutting , Shearing (Deformation)

An Investigation of Material Removal Mechanisms in Lapping with Grain Size Transition

Y. P. Chang, M. Hashimura, D. A. Dornfeld, Fellow ASME,

J. Manuf. Sci. Eng. August 2000, 122(3): 413–419. doi: https://doi.org/10.1115/1.1286471

Abstract

View articletitled, An Investigation of Material Removal Mechanisms in Lapping with Grain Size Transition

Open the PDF for in another window

Topics: Abrasion , Brittleness , Grinding , Machining , Slurries , Grain size

Modeling of Conduction Mode Laser Welding Process For Feedback Control

Fuu-Ren Tsai, Graduate Student, Elijah Kannatey-Asibu,, Jr., Professor

J. Manuf. Sci. Eng. August 2000, 122(3): 420–428. doi: https://doi.org/10.1115/1.1285864

Abstract

View articletitled, Modeling of Conduction Mode Laser Welding Process For Feedback Control

Open the PDF for in another window

Topics: Feedback , Heat , Heat conduction , Laser welding , Lasers , Modeling , Shapes , Temperature , Welding , Steady state

Gas Jet–Workpiece Interactions in Laser Machining

Kai Chen, Y. Lawrence Yao, Vijay Modi

J. Manuf. Sci. Eng. August 2000, 122(3): 429–438. doi: https://doi.org/10.1115/1.1285901

Abstract

View articletitled, Gas Jet–Workpiece Interactions in Laser Machining

Open the PDF for in another window

Topics: Flow (Dynamics) , Lasers , Machining , Nozzles , Pressure , Shock (Mechanics) , Turbulence , Laser cutting , Computer simulation

A Simulation-Based Correlation of the Density and Thermal Conductivity of Objects Produced by Laser Sintering of Polymer Powders

M. Kandis, Graduate Student, Student Mem. ASME, T. L. Bergman, Professor and Head, Fellow ASME

J. Manuf. Sci. Eng. August 2000, 122(3): 439–444. doi: https://doi.org/10.1115/1.1286558

Abstract

View articletitled, A Simulation-Based Correlation of the Density and Thermal Conductivity of Objects Produced by Laser Sintering of Polymer Powders

Open the PDF for in another window

Topics: Density , Irradiation (Radiation exposure) , Lasers , Polymers , Porosity , Shapes , Simulation , Sintering , Thermal conductivity , Temperature

Numerical and Experimental Study of Strain Rate Effects in Laser Forming

Wenchuan Li, Y. Lawrence Yao

J. Manuf. Sci. Eng. August 2000, 122(3): 445–451. doi: https://doi.org/10.1115/1.1286731

Abstract

View articletitled, Numerical and Experimental Study of Strain Rate Effects in Laser Forming

Open the PDF for in another window

Topics: Lasers , Stress , Temperature , Flow (Dynamics) , Computer simulation , Deformation

Role of Unloading in Machining of Brittle Materials

A. Chandra, K. Wang, Y. Huang, G. Subhash, M. H. Miller, W. Qu

J. Manuf. Sci. Eng. August 2000, 122(3): 452–462. doi: https://doi.org/10.1115/1.1285903

Abstract

View articletitled, Role of Unloading in Machining of Brittle Materials

Open the PDF for in another window

Topics: Brittleness , Ceramics , Damage , Fracture (Materials) , Glass , Grinding , Machining , Stress , Borosilicate glasses

A Closed Form Solution for Flow During the Vacuum Assisted Resin Transfer Molding Process

K-T. Hsiao, R. Mathur, S. G. Advani, J. W. Gillespie,, Jr., B. K. Fink

J. Manuf. Sci. Eng. August 2000, 122(3): 463–475. doi: https://doi.org/10.1115/1.1285907

Abstract

View articletitled, A Closed Form Solution for Flow During the Vacuum Assisted Resin Transfer Molding Process

Open the PDF for in another window

Topics: Flow (Dynamics) , Resins

Prediction of Ductile Fracture in Metal Blanking

A. M. Goijaerts, L. E. Govaert, F. P. T. Baaijens

J. Manuf. Sci. Eng. August 2000, 122(3): 476–483. doi: https://doi.org/10.1115/1.1285909

Abstract

View articletitled, Prediction of Ductile Fracture in Metal Blanking

Open the PDF for in another window

Topics: Blanking (Metalworking) , Ductile fracture , Fracture (Materials) , Hydrostatic pressure

Enhanced Aluminum Properties by Means of Precise Droplet Deposition

Melissa Orme, Robert F. Smith

J. Manuf. Sci. Eng. August 2000, 122(3): 484–493. doi: https://doi.org/10.1115/1.1285914

Abstract

View articletitled, Enhanced Aluminum Properties by Means of Precise Droplet Deposition

Open the PDF for in another window

Topics: Aluminum , Drops , Manufacturing

Application of Fuzzy Set Theory in the Scheduling of a Tandem Cold-Rolling Mill

U. S. Dixit, P. M. Dixit

J. Manuf. Sci. Eng. August 2000, 122(3): 494–500. doi: https://doi.org/10.1115/1.1285866

Abstract

View articletitled, Application of Fuzzy Set Theory in the Scheduling of a Tandem Cold-Rolling Mill

Open the PDF for in another window

Topics: Cold rolling , Fuzzy set theory , Optimization , Reliability , Strips , Design , Friction

A Statistical Analysis of Expulsion Limits in Resistance Spot Welding

Hongyan Zhang, S. Jack Hu, Jacek Senkara, Shaowei Cheng

J. Manuf. Sci. Eng. August 2000, 122(3): 501–510. doi: https://doi.org/10.1115/1.1285873

Abstract

View articletitled, A Statistical Analysis of Expulsion Limits in Resistance Spot Welding

Open the PDF for in another window

Topics: Aluminum alloys , Statistical analysis , Steel , Welding , Electrodes , Probability

On-line Quality Estimation in Resistance Spot Welding

Wei Li, S. Jack Hu, Jun Ni

J. Manuf. Sci. Eng. August 2000, 122(3): 511–512. doi: https://doi.org/10.1115/1.1286814

Abstract

View articletitled, On-line Quality Estimation in Resistance Spot Welding

Open the PDF for in another window

Topics: Welding , Feature selection , Signals , Displacement

Evaluating Process Capability During the Design of Manufacturing Systems

Daniel D. Frey, Hughes Doctoral Fellow, Kevin N. Otto, Assistant Professor, Joseph A. Wysocki

J. Manuf. Sci. Eng. August 2000, 122(3): 513–519. doi: https://doi.org/10.1115/1.1285761

Abstract

View articletitled, Evaluating Process Capability During the Design of Manufacturing Systems

Open the PDF for in another window

Topics: Design , Manufacturing , Manufacturing systems , Noise (Sound) , Surface mount packaging , Errors

Robust Tolerance Synthesis With the Design of Experiments Approach

Chang-Xue (Jack) Feng, Associate Professor, ASME Member,, Andrew Kusiak, Professor,

J. Manuf. Sci. Eng. August 2000, 122(3): 520–528. doi: https://doi.org/10.1115/1.1285860

Abstract

View articletitled, Robust Tolerance Synthesis With the Design of Experiments Approach

Open the PDF for in another window

Topics: Design , Dimensions , Experimental design , Manufacturing , Simulation

Optimal Tolerance Allocation With Loss Functions

Hoo-Gon R. Choi, Professor, Man-Hee Park, Graduate Student, Erik Salisbury

J. Manuf. Sci. Eng. August 2000, 122(3): 529–535. doi: https://doi.org/10.1115/1.1285918

Abstract

View articletitled, Optimal Tolerance Allocation With Loss Functions

Open the PDF for in another window

Topics: Design , Machining , Manufacturing , Dimensions

Swept Surface Synthesis With Visibility

Ming-En Wang, Lin-Lin Chen, Tony C. Woo

J. Manuf. Sci. Eng. August 2000, 122(3): 536–542. doi: https://doi.org/10.1115/1.1286054

Abstract

View articletitled, Swept Surface Synthesis With Visibility

Open the PDF for in another window

Topics: Design , Manufacturing , Modeling , Rotation

Finding Minimum Cost Tool Grouping Schemes on Machining Systems

Derek Yip-Hoi, Debasish Dutta

J. Manuf. Sci. Eng. August 2000, 122(3): 543–548. doi: https://doi.org/10.1115/1.1286086

Abstract

View articletitled, Finding Minimum Cost Tool Grouping Schemes on Machining Systems

Open the PDF for in another window

Topics: Downtime , Genetic algorithms , Machine tools , Machining , Machining centers , Optimization , Tooling , String , Machinery

Parametric-Based Determination of Cylindrical Variations in Geometric Tolerancing

C. Carolina Ba´rcenas, Paul M. Griffin

J. Manuf. Sci. Eng. August 2000, 122(3): 549–555. doi: https://doi.org/10.1115/1.1286085

Abstract

View articletitled, Parametric-Based Determination of Cylindrical Variations in Geometric Tolerancing

Open the PDF for in another window

Topics: Cylinders , Deformation , Fittings , Shapes , Manufacturing , Errors , Geometric dimensioning and tolerancing , Tolerance analysis

Evaluation and Improvement of Productivity in High-Speed NC Machining

X. Yan, Mem. ASME,, K. Shirase, M. Hirao, T. Yasui

J. Manuf. Sci. Eng. August 2000, 122(3): 556–561. doi: https://doi.org/10.1115/1.1286170

Abstract

View articletitled, Evaluation and Improvement of Productivity in High-Speed NC Machining

Open the PDF for in another window

Topics: Cutting , Machining , Kinematics

A Hydraulically-Actuated Reconfigurable Tool for Flexible Fabrication: Implementation and Control

Daniel F. Walczyk, Assistant Professor, Mem. ASME, Yong-Tai Im, Research Assistant, Mem. ASME

J. Manuf. Sci. Eng. August 2000, 122(3): 562–568. doi: https://doi.org/10.1115/1.1286258

Abstract

View articletitled, A Hydraulically-Actuated Reconfigurable Tool for Flexible Fabrication: Implementation and Control

Open the PDF for in another window

Topics: Control systems , Fluids , Manufacturing , Pins (Engineering) , Position control , Shapes , Resolution (Optics) , Composite materials , Hydraulic pumps , Aerospace industry

Modeling of the Holding Force in an Electromagnetic Chuck

Alejandro Felix, Shreyes N. Melkote, Yoichi Matsumoto

J. Manuf. Sci. Eng. August 2000, 122(3): 569–575. doi: https://doi.org/10.1115/1.1286259

Abstract

View articletitled, Modeling of the Holding Force in an Electromagnetic Chuck

Open the PDF for in another window

Topics: Circuits , Leakage , Modeling , Errors , Machining , Finite element model , Poles (Building) , Magnetic flux

An Experimental Investigation of the Creping Process in Low-Density Paper Manufacturing

M. K. Ramasubramanian, Associate Professor, Mem. ASME, Dmitry L. Shmagin, Graduate Student

J. Manuf. Sci. Eng. August 2000, 122(3): 576–581. doi: https://doi.org/10.1115/1.1285908

Abstract

View articletitled, An Experimental Investigation of the Creping Process in Low-Density Paper Manufacturing

Open the PDF for in another window

Topics: Adhesives , Blades , Machinery , Manufacturing , Design , Density , Mechatronics , Geometry , Stress , Adhesion

Technical Briefs

Point Laser Triangulation Probe Calibration for Coordinate Metrology

Kevin B. Smith, Yuan F. Zheng

J. Manuf. Sci. Eng. August 2000, 122(3): 582–586. doi: https://doi.org/10.1115/1.1286256

Abstract

View articletitled, Point Laser Triangulation Probe Calibration for Coordinate Metrology

Open the PDF for in another window

Topics: Calibration , Probes

Simultaneous Optimization of Machining Parameters for Dimensional Instability Control in Aero Gas Turbine Components Made of Inconel 718 Alloy

B. K. Subhas, Scientist F, Ramaraja Bhat, Scientist B, K. Ramachandra, Scientist G, H. K. Balakrishna, Dean,

J. Manuf. Sci. Eng. August 2000, 122(3): 586–590. doi: https://doi.org/10.1115/1.1287591

Abstract

View articletitled, Simultaneous Optimization of Machining Parameters for Dimensional Instability Control in Aero Gas Turbine Components Made of Inconel 718 Alloy

Open the PDF for in another window

Topics: Gas turbines , Machining , Optimization , Residual stresses , Cutting , Finishes , Turning , Superalloys

Edge Radius Variability and Force Measurement Considerations

Roy J. Schimmel, Graduate Research Assistant, Jairam Manjunathaiah, Graduate Research Assistant, William J. Endres, Assistant Professor, Mem. ASME

J. Manuf. Sci. Eng. August 2000, 122(3): 590–593. doi: https://doi.org/10.1115/1.1286255

Abstract

View articletitled, Edge Radius Variability and Force Measurement Considerations

Open the PDF for in another window

Topics: Corners (Structural elements) , Cutting , Errors , Force measurement , Machining , Thrust

Technical Papers

Evaluating Cutting Fluid Effects on Cylinder Boring Surface Errors by Inverse Heat Transfer and Finite Element Methods

A New Model and Analysis of Orthogonal Machining With an Edge-Radiused Tool

Analytical Stability Analysis of Variable Spindle Speed Machining

A Mechanistic Force Model for Contour Turning

Hard Turning: Chip Formation Mechanisms and Metallurgical Aspects

An Investigation of Material Removal Mechanisms in Lapping with Grain Size Transition

Modeling of Conduction Mode Laser Welding Process For Feedback Control

Gas Jet–Workpiece Interactions in Laser Machining

A Simulation-Based Correlation of the Density and Thermal Conductivity of Objects Produced by Laser Sintering of Polymer Powders

Numerical and Experimental Study of Strain Rate Effects in Laser Forming

Role of Unloading in Machining of Brittle Materials

A Closed Form Solution for Flow During the Vacuum Assisted Resin Transfer Molding Process

Prediction of Ductile Fracture in Metal Blanking

Enhanced Aluminum Properties by Means of Precise Droplet Deposition

Application of Fuzzy Set Theory in the Scheduling of a Tandem Cold-Rolling Mill

A Statistical Analysis of Expulsion Limits in Resistance Spot Welding

On-line Quality Estimation in Resistance Spot Welding

Evaluating Process Capability During the Design of Manufacturing Systems

Robust Tolerance Synthesis With the Design of Experiments Approach

Optimal Tolerance Allocation With Loss Functions

Swept Surface Synthesis With Visibility

Finding Minimum Cost Tool Grouping Schemes on Machining Systems

Parametric-Based Determination of Cylindrical Variations in Geometric Tolerancing

Evaluation and Improvement of Productivity in High-Speed NC Machining

A Hydraulically-Actuated Reconfigurable Tool for Flexible Fabrication: Implementation and Control

Modeling of the Holding Force in an Electromagnetic Chuck

An Experimental Investigation of the Creping Process in Low-Density Paper Manufacturing

Technical Briefs

Point Laser Triangulation Probe Calibration for Coordinate Metrology

Simultaneous Optimization of Machining Parameters for Dimensional Instability Control in Aero Gas Turbine Components Made of Inconel 718 Alloy

Edge Radius Variability and Force Measurement Considerations

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only