Skip Nav Destination
Issues
November 2003
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Technical Papers
Influence of Exit Surface Angle on Drilling Burr Formation
Sangkee Min, Post Doctoral Researcher, David A. Dornfeld, Professor, Fellow ASME, Yohichi Nakao, Associate Professor,
J. Manuf. Sci. Eng. November 2003, 125(4): 637–644.
doi: https://doi.org/10.1115/1.1596573
Topics:
Cutting
,
Deformation
,
Drilling
,
Drills (Tools)
Measurements and Simulations of Temperature and Deformation Fields in Transient Metal Cutting
J. Manuf. Sci. Eng. November 2003, 125(4): 645–655.
doi: https://doi.org/10.1115/1.1596571
Topics:
Cutting
,
Deformation
,
Finite element analysis
,
Metal cutting
,
Simulation
,
Steel
,
Temperature
,
Cutting tools
,
Engineering simulation
,
Transients (Dynamics)
Extension of Oxley’s Analysis of Machining to Use Different Material Models
J. Manuf. Sci. Eng. November 2003, 125(4): 656–666.
doi: https://doi.org/10.1115/1.1617287
Topics:
Cutting
,
Machining
,
Shear (Mechanics)
,
Stress
,
Temperature
,
Carbon steel
Experimental Cutting Tool Temperature Distributions
J. Manuf. Sci. Eng. November 2003, 125(4): 667–673.
doi: https://doi.org/10.1115/1.1621425
Topics:
Cutting
,
Cutting tools
,
Machining
,
Temperature
,
Temperature distribution
,
Resolution (Optics)
,
Infrared imaging
,
Wear
The Effect of Preheating of Work Material on Chatter During End Milling of Medium Carbon Steel Performed on a Vertical Machining Center (VMC)
J. Manuf. Sci. Eng. November 2003, 125(4): 674–680.
doi: https://doi.org/10.1115/1.1596557
Topics:
Chatter
,
Cutting
,
Machining
,
Surface roughness
,
Temperature
,
Carbon steel
,
Vibration
,
Wear
,
Milling
,
Heating
Modeling Forces Including Elastic Recovery for Internal Thread Forming
Sameer Chowdhary, Graduate Research Assistant, Richard E. DeVor, Research Professor, Shiv G. Kapoor, Professor
J. Manuf. Sci. Eng. November 2003, 125(4): 681–688.
doi: https://doi.org/10.1115/1.1619178
Topics:
Brass (Metal)
,
Calibration
,
Geometry
,
Modeling
,
Thread
,
Thrust
,
Torque
Thermophysical-Property-Based Selection of Tool Protective Coatings for Dry Machining of Steels
J. Manuf. Sci. Eng. November 2003, 125(4): 689–695.
doi: https://doi.org/10.1115/1.1617982
Topics:
Coatings
,
Cutting
,
Heat
,
Machining
,
Steel
,
Temperature
,
Heat flux
,
Stainless steel
,
Thermal conductivity
,
Cutting tools
Prediction of Coolant Pressure and Volume Flow Rate in the Gundrilling Process
J. Manuf. Sci. Eng. November 2003, 125(4): 696–702.
doi: https://doi.org/10.1115/1.1621427
Topics:
Coolants
,
Flow (Dynamics)
,
Pressure
,
Drills (Tools)
The Effect of Chip Adsorption on Selective Depletion From a Multi-Component Synthetic Metalworking Fluid
Joseph J. Eppert, Graduate Research Assistant, Richard E. DeVor, Professor, Shiv G. Kapoor, Professor, N. Rajagopalan, Senior Research Engineer
J. Manuf. Sci. Eng. November 2003, 125(4): 703–708.
doi: https://doi.org/10.1115/1.1615794
Topics:
Corrosion
,
Equilibrium (Physics)
,
Fluids
,
Lubricants
,
Machining
,
Maintenance
,
Metal surfaces
,
Metalworking
,
Water
,
Surfactants
A Curvilinear Tool-Path Method for Pocket Machining
J. Manuf. Sci. Eng. November 2003, 125(4): 709–715.
doi: https://doi.org/10.1115/1.1596579
Topics:
Machinery
,
Machining
,
Optimization
,
Cutting
,
Boundary-value problems
,
Shapes
Dimensional Errors of Fixtures, Locating and Measurement Datum Features in the Stream of Variation Modeling in Machining
J. Manuf. Sci. Eng. November 2003, 125(4): 716–730.
doi: https://doi.org/10.1115/1.1621424
Mechanistic Understanding of Material Detachment During Micro-Scale Polishing
J. Manuf. Sci. Eng. November 2003, 125(4): 731–735.
doi: https://doi.org/10.1115/1.1619964
Support Vector Regression for Determination of Minimum Zone
J. Manuf. Sci. Eng. November 2003, 125(4): 736–739.
doi: https://doi.org/10.1115/1.1596572
A Pattern Recognition Approach for Manufacturing Facility Compaction by Machining Function Combination Using Flexible Manufacturing Modules
J. Manuf. Sci. Eng. November 2003, 125(4): 740–752.
doi: https://doi.org/10.1115/1.1596558
Topics:
Compacting
,
Machinery
,
Machining
,
Pattern recognition
,
Flexible manufacturing systems
,
Design
,
Materials handling
,
Plant layout
Gear Forging: Mathematical Modeling and Experimental Validation
J. Manuf. Sci. Eng. November 2003, 125(4): 753–762.
doi: https://doi.org/10.1115/1.1616952
Topics:
Forging
,
Gears
,
Pressure
,
Deformation
,
Friction
Estimation of Optimal Blank Holder Force Trajectories in Segmented Binders Using an ARMA Model
J. Manuf. Sci. Eng. November 2003, 125(4): 763–770.
doi: https://doi.org/10.1115/1.1616948
Topics:
Binders (Materials)
,
Blanks
,
Displacement
,
Simulation
Analysis of Core Buckling Defects in Sheet Metal Coil Processing
J. Manuf. Sci. Eng. November 2003, 125(4): 771–777.
doi: https://doi.org/10.1115/1.1619177
Topics:
Buckling
,
Sheet metal
,
Stress
,
Pressure
On the Characteristics and Mechanism of Rolling Instability and Chatter
J. Manuf. Sci. Eng. November 2003, 125(4): 778–786.
doi: https://doi.org/10.1115/1.1617981
Topics:
Chatter
,
Deformation
,
Excitation
,
Rolling mills
,
Sheet metal
,
Strips
,
Damping
,
Stiffness
,
Tension
Mechanics of Die-less Asymmetric Rolling for Fabrication of Compound Curved Plates
J. Manuf. Sci. Eng. November 2003, 125(4): 787–793.
doi: https://doi.org/10.1115/1.1616950
Topics:
Finite element analysis
,
Rollers
,
Deformation
Analysis of Heat Transfer Between the Gas Torch and the Plate For the Application of Line Heating
J. Manuf. Sci. Eng. November 2003, 125(4): 794–800.
doi: https://doi.org/10.1115/1.1616949
Topics:
Finite element analysis
,
Flow (Dynamics)
,
Heat
,
Heat flux
,
Heat transfer
,
Heating
,
Steel
,
Temperature
,
Thermofluids
,
Turbulence
Experimental Study and Modeling of GTA Welding Process
J. Manuf. Sci. Eng. November 2003, 125(4): 801–808.
doi: https://doi.org/10.1115/1.1537740
Electrode Jump Motion in Linear Motor Equipped Die-Sinking EDM
J. Manuf. Sci. Eng. November 2003, 125(4): 809–815.
doi: https://doi.org/10.1115/1.1615793
Topics:
Electrodes
,
Machining
,
Algorithms
Developments in Microelectromechanical Systems (MEMS): A Manufacturing Perspective
J. Manuf. Sci. Eng. November 2003, 125(4): 816–823.
doi: https://doi.org/10.1115/1.1617286
Topics:
Manufacturing
,
Microelectromechanical systems
,
Micromachining
,
Packaging
Thermal Analysis of Ice Walls Built by Rapid Freeze Prototyping
J. Manuf. Sci. Eng. November 2003, 125(4): 824–834.
doi: https://doi.org/10.1115/1.1621426
Topics:
Ice
,
Temperature
,
Water
,
Solidification
Adaptive Product, Process and Tooling Design Strategy for Optimal Dimensional Quality of Automotive Body Assemblies
J. Manuf. Sci. Eng. November 2003, 125(4): 835–843.
doi: https://doi.org/10.1115/1.1616946
Topics:
Design
,
Dimensions
,
Manufacturing
,
Tooling
Engineering Surface Analysis With Different Wavelet Bases
J. Manuf. Sci. Eng. November 2003, 125(4): 844–852.
doi: https://doi.org/10.1115/1.1616947