... of 160 m/min and high cutting speed 240 m/min. It was found that adhesion, abrasion and diffusion dominated the wear process of PCD tools in different worn regions. Microscopic characters showed that the wear mechanisms were different in the three tribological regions, which was affected...

... under the optical microscope. 27 05 2010 07 10 2011 11 01 2012 11 01 2012 adhesion austenitic stainless steel cooling diffusion bonding hardness heating indentation scanning electron microscopy solidification tensile strength titanium alloys zirconium alloys...

... adjustment reduces weld flash and improves the appearance of the weld. 10 06 2009 03 04 2011 09 06 2011 09 06 2011 adhesion aluminium alloys butt welding closed loop systems cracks force control forge welding heat treatment maintenance engineering milling machines...

... process, such as electric field, chemical composition, and physical influences of the electrolyte, are analyzed. The main reasons for the low process durability of coatings are poor adhesion and harsh chemical and physical environments. The most promising coating for the process is diamond-like carbon...

...Yuhong Liu; Shuxin Wang; Lianhong Zhang; Rui Zhou; Weijing Liu; P. C. Wang The performance of adhesive bonded subassemblies and vehicle structures strongly depends on not only the properties of the adherends and adhesives but also the gap between the workpieces. An excessive gap between the joined...

...Edward C. De Meter, Professor, Light Activated Adhesive Gripper (LAAG) workholding technology is a means by which a workpiece is held by adhesive joints that can be instantaneously cured or destroyed, on demand. A LAAG joint is the adhesive bond between the gripper pin and workpiece. Due...

...Xin Wu; Hongqi Hao The bonding strength of metal-to-metal lap joining of a two-part epoxy-based adhesive employed in an automotive assembly line was investigated under different heating rates (10 to 6000°C/min), peak temperatures (room to 250°C), and holding times. The results indicate that bonding...

... Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING . Manuscript received May 2001; Revised August 2002. Associate Editor: S. Kapoor 01 May 2001 01 August 2002 23 07 2003 diamond copper friction adhesion scanning electron microscopy composite...

...William C. Russell; Ajay P. Malshe; Sharad N. Yedave; William D. Brown Cubic boron nitride coatings are under development for a variety of applications but stabilization of the pure CBN form and adhesion of films deposited by PVD and ion-based methods have been difficult. An alternate two-stage...

... the effect of various manufacturing process parameters such as the creping adhesive type, concentration (application rate), creping geometry (creping angle), machine speed, and moisture content in the sheet at the time of creping, and their influence on sheet structure and creping forces. A mechanistic...