...) numerical analysis paper making shear strength creping tissue paper adhesive delamination buckling softness failure Paper is manufactured by depositing dilute slurry of pulped wood fibers on a moving screen called the forming fabric to dewater and form a wet web. The web is dewatered...

... with respect to the tip of conical mirror on beam distortion was modeled and assessed experimentally. The effects of the laser power, the angular speed, and the number of passes on the joint shear strength were examined. Process parameters that gave good joint strengths were identified. 10 02 2010 01...

... hot press at 1000 ° C with a heating rate of 10 ° C / min , a dwell time of 2 h and a bonding pressure of 10 MPa. Bond strength measurements show that the sample brazed with a nickel nanoparticle interlayer has the lowest void fraction at 4.8 ± 0.9 % and highest shear strength at 141.3 ± 7.0 MPa...

... tools micromachining shear strength steel There is a growing demand for parts with microscale features for applications in diverse fields ranging from optics, semiconductors to micromolding of plastics. In order to cater to this demand, mechanical microcutting methods are being developed...

.... aluminium crystallography cutting cutting tools friction micromachining scanning electron microscopy shear strength 30 05 2006 17 12 2007 03 06 2008 2008 American Society of Mechanical Engineers ...

..., can be calculated using this model from experimentally measured values of the instantaneous thrust force and torque. Good matches between the calculated shear strengths and the handbook values for thermally drilling low carbon steel confirm the model’s validity. 01 12 2006 24 09 2007 06...

... on a prototype integrally bladed rotor. 29 11 2006 07 09 2007 30 01 2008 blades computerised numerical control cutting cutting tools friction impellers jet engines milling prototypes rotors shear strength Jet engine impellers are flank milled on five-axis CNC machining...

... loading, LAAG joint failure resulted from cohesive failure of the adhesive as opposed to adhesive failure at the gripper pin-adhesive interface or the workpiece-adhesive interface. (1) The maximum tensile strength, maximum shear strength, and ductility of the LAAG joints were 308%, 34%, and 112...

... of geometrically necessary dislocations, shear strength and the specific shear energy. The analysis of deformation in the PDZ shows that the length of the shear plane represents the fundamental material length scale governing the size-effect. It also provides an estimate of the lower bound on the size-effect...