A procedure for determining parameters for anisotropic forms of nonlinear kinematic hardening rules for cyclic plasticity or viscoplasticity models is described. An earlier reported methodology for determining parameters for isotropic forms of uncoupled, superposed Armstrong-Frederick type kinematic hardening rules is extended. For this exercise, the anisotropy of the kinematic hardening rules is restricted to transverse isotropy or orthotropy. A limited number of parameters for such kinematic hardening rules can be determined using reversed proportional tension-torsion cycling of thin-walled tubular specimens. This is demonstrated using tests on type 304 stainless-steel specimens and results are compared to results based on the assumption of isotropic forms of the kinematic hardening rules. [S0094-4289(00)00301-7]
Issue Section:
Technical Papers
1.
Chaboche, J. L., Dang-Van, K., and Cordier, G., 1979, “Modelization of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel,” Proceedings of 5th International Conference on Structural Mechanics in Reactor Technology, Berlin, L11/3.
2.
Chaboche
, J. L.
, 1993
, “Cyclic Viscoplastic Constitutive Equations, Part I: A Thermodynamically Consistent Formulation
,” ASME J. Appl. Mech.
, 60
, pp. 813
–820
.3.
McDowell
, D. L.
, 1992
, “A Nonlinear Kinematic Hardening Theory for Cyclic Thermoplasticity and Thermoviscoplasticity
,” Int. J. Plast.
, 8
, pp. 695
–728
.4.
McDowell
, D. L.
, 1985
, “An Experimental Study of the Structure of Constitutive Equations for Nonproportional Cyclic Plasticity
,” ASME J. Eng. Mater. Technol.
, 107
, pp. 307
–315
.5.
Moosbrugger
, J. C.
, and McDowell
, D. L.
, 1989
, “On a Class of Kinematic Hardening Rules for Nonproportional Cyclic Plasticity
,” ASME J. Eng. Mater. Technol.
, 111
, pp. 87
–98
.6.
Moosbrugger
, J. C.
, 1991
, “Some Developments in the Characterization of Material Hardening and Rate Sensitivity for Cyclic Viscoplasticity Models
,” Int. J. Plast.
, 7
, pp. 405
–431
.7.
Moosbrugger
, J. C.
, 1993
, “Experimental Parameter Estimation for Nonproportional Cyclic Viscoplasticity: Nonlinear Kinematic Hardening Rules for Two Waspaloy Microstructures at 650°C
,” Int. J. Plast.
, 9
, pp. 345
–373
.8.
Chaboche, J. L., 1989, “A New Constitutive Framework to Describe Limited Ratchetting Effects,” Proceedings of Plasticity’89, Pergamon, New York, p. 211.
9.
Chaboche
, J. L.
, and Nouailhas
, D.
, 1989
, “Constitutive Modeling of Ratchetting Effects—Part I: Experimental Facts and Properties of Classical Models
,” ASME J. Eng. Mater. Technol.
, 111
, pp. 384
–392
.10.
Chaboche
, J. L.
, and Nouailhas
, D.
, 1989
, “Constitutive Modeling of Ratchetting Effects—Part II: Possibilities of Some Additional Kinematic Rules
,” ASME J. Eng. Mater. Technol.
, 111
, pp. 409
–416
.11.
Bower
, A. F.
, 1989
, “Cyclic Hardening Properties of Hard-Drawn Copper and Rail Steel
,” J. Mech. Phys. Solids
, 37
, pp. 455
–470
.12.
Chaboche
, J. L.
, 1991
, “On Some Modifications of Kinematic Hardening to Improve the Description of Ratchetting Effects
,” Int. J. Plast.
, 7
, pp. 661
–678
.13.
Ohno, N., and Wang, J.-D., 1991, “Nonlinear Kinematic Hardening Rule: Proposition and Application to Ratchetting Problems,” Proceedings of the 11th International Conference on Structural Mechanics in Reactor Technology, Tokyo, L22/1., pp. 481–486.
14.
Ohno
, N.
, and Wang
, J.-D.
, 1991
, “Transformation of a Nonlinear Kinematic Hardening Rule to a Multisurface Form under Isothermal and Nonisothermal Conditions
,” Int. J. Plast.
, 7
, pp. 879
–891
.15.
Ohno
, N.
, and Wang
, J.-D.
, 1993
, “Kinematic Hardening Rules with Critical State of Dynamic Recovery, Part I: Formulation and Basic Features for Ratchetting Behavior
,” Int. J. Plast.
, 9
, pp. 375
–390
.16.
Ohno
, N.
, and Wang
, J.-D.
, 1993
, “Kinematic Hardening Rules with Critical State of Dynamic Recovery, Part II: Applications to Experiments of Ratchetting Behavior
,” Int. J. Plast.
, 9
, pp. 391
–403
.17.
Jiang
, Y.
, and Sehitoglu
, H.
, 1994
, “Cyclic Ratchetting of 1070 under Multiaxial Stress State
,” Int. J. Plast.
, 10
, pp. 579
–608
.18.
Jiang
, Y.
, and Sehitoglu
, H.
, 1994
, “Multiaxial Ratchetting under Multiple Step Loading
,” Int. J. Plast.
, 10
, pp. 849
–870
.19.
Jiang
, Y.
, and Sehitoglu
, H.
, 1996
, “Modeling of Cyclic Ratchetting Plasticity, Part I: Development of Constitutive Relations
,” ASME J. Appl. Mech.
, 63
, pp. 720
–725
.20.
Jiang
, Y.
, and Sehitoglu
, H.
, 1996
, “Modeling of Cyclic Ratchetting Plasticity, Part II: Comparison of Model Simulations with Experiments
,” ASME J. Appl. Mech.
, 63
, pp. 726
–733
.21.
McDowell
, D. L.
, 1995
, “Stress State Dependence of Cyclic Ratchetting Behavior of Two Rail Steels
,” Int. J. Plast.
, 11
, pp. 397
–421
.22.
Chaboche
, J. L.
, and Jung
, O.
, 1997
, “Application of a Kinematic Hardening Viscoplasticity Model with Thresholds to the Residual Stress Relaxation
,” Int. J. Plast.
, 13
, pp. 785
–807
.23.
Sutco
, M.
, and Krempl
, E.
, 1990
, “A Simplified Orthotropic Viscoplasticity Theory Based on Overstress
,” Int. J. Plast.
, 6
, pp. 247
–261
.24.
Lee
, K.-D.
, and Krempl
, E.
, 1991
, “An Orthotropic Theory of Viscoplasticity Based on Overstress for Thermomechanical Deformations
,” Int. J. Solids Struct.
, 27
, pp. 1445
–1459
.25.
Nouailhas, D., and Chaboche, J. L., 1991, “Anisotropic Constitutive Modeling for Single Crystal Superalloys using a Continuum Phenomenological Approach,” TIRE A PART N° 1991-6, Office Nationale d’Etudes et de Recherches Aerospatiales, France.
26.
Nouailhas, D., and Culie, J.-P., 1991, “Development and Application of a Model for Single Crystal Superalloys,” TIRE A PART N° 1991-214, Office Nationale d’Etudes et de Recherches Aerospatiales, France.
27.
Nouailhas
, D.
, and Freed
, A. D.
, 1992
, “A Viscoplastic Theory for Anisotropic Materials
,” ASME J. Eng. Mater. Technol.
, 114
, pp. 97
–104
.28.
Moosbrugger
, J. C.
, and Morrison
, D. J.
, 1997
, “Nonlinear Kinematic Hardening Rule Parameters—Direct Determination From Completely Reversed Proportional Cycling
,” Int. J. Plast.
, 13
, pp. 633
–668
.29.
Lubliner, J., 1990, Plasticity Theory, Macmillan, New York.
30.
Khan, A. S., and Huang, S., 1995, Continuum Theory of Plasticity, Wiley, New York.
31.
Moosbrugger, J. C., 1988, “A Rate-Dependent Bounding Surface Model for Non-proportional Cyclic Viscoplasticity,” Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
32.
Kuhlmann-Wilsdorf
, D.
, and Laird
, C.
, 1979
, “Dislocations Behavior in Fatigue II. Friction Stress and Back Stress as Inferred from an Analysis of Hysteresis Loops
,” Mater. Sci. Eng.
, 37
, pp. 111
–120
.33.
Cottrell, A. H., 1953, Dislocations and Plastic Flow in Crystals, Oxford University Press, London, pp. 111–116.
34.
Barrett, C., and Massalski, T. B., 1980, Structure of Metals, 3rd revised edition: Crystallographic Methods, Principles and Data, International Series on Materials Science and Technology, Pergamon, New York, Vol. 35, pp. 543–544.
35.
Kocks, U. F., Tome´, C. N., and Wenk, H.-R., 1998, Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties, Cambridge University Press, Cambridge, U.K.
36.
Mughrabi
, H.
, 1978
, “The Cyclic Hardening and Saturation Behavior of Copper Single Crystals
,” Mater. Sci. Eng.
, 33
, pp. 207
–223
.37.
Morrison
, D. J.
, Jones
, J. W.
, and Was
, G. S.
, 1990
, “Cyclic Strain Localization in Ion Beam Microalloyed Nickel
,” Scr. Metall.
, 24
, pp. 2309
–2314
.38.
McDowell
, D. L.
, Stahl
, D. R.
, Stock
, S. R.
, and Antolovich
, S. D.
, 1988
, “Biaxial Path Dependence of Deformation Substructure of Type 304 Stainless Steel
,” Metall. Trans. A
, 19A
, pp. 1277
–1293
.39.
Doong
, S. H.
, Socie
, D. F.
, and Robertson
, I. M.
, 1990
, “Dislocation Substructures and Nonproportional Hardening
,” ASME J. Eng. Mater. Technol.
, 112
, pp. 456
–463
.40.
Armstrong, P. J., and Frederick, C. O., 1966, “A Mathematical Representation of the Multiaxial Bauschinger Effect,” C.E.G.B. RD/B/N 731.
Copyright © 2000
by ASME
You do not currently have access to this content.
