Compressive post-buckling under thermal environments and thermal post-buckling due to uniform temperature field or heat conduction are presented for a shear deformable functionally graded cylindrical shell with piezoelectric fiber reinforced composite (PFRC) actuators. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and the material properties of both FGM and PFRC layers are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation shell theory that includes thermopiezoelectric effects. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine buckling loads (temperature) and post-buckling equilibrium paths. The numerical illustrations concern the compressive and thermal post-buckling behavior of perfect and imperfect FGM cylindrical shells with fully covered PFRC actuators under different sets of thermal and electric loading conditions, from which results for monolithic piezoelectric actuators are obtained as comparators. The results reveal that, in the compressive buckling case, the control voltage only has a small effect on the post-buckling load-deflection curves of the shell with PFRC actuators, whereas in the thermal buckling case, the effect of control voltage is more pronounced for the shell with PFRC actuators, compared with the results of the same shell with monolithic piezoelectric actuators.
Skip Nav Destination
e-mail: hsshen@mail.sjtu.edu.cn
Article navigation
July 2009
Research Papers
A Comparison of Post-buckling Behavior for FGM Cylindrical Shells With Piezoelectric Fiber Reinforced Composite Actuators
Hui-Shen Shen
Hui-Shen Shen
School of Ocean and Civil Engineering, and State Key Laboratory of Ocean Engineering,
e-mail: hsshen@mail.sjtu.edu.cn
Shanghai Jiao Tong University
, Shanghai 200030, People’s Republic of China
Search for other works by this author on:
Hui-Shen Shen
School of Ocean and Civil Engineering, and State Key Laboratory of Ocean Engineering,
Shanghai Jiao Tong University
, Shanghai 200030, People’s Republic of Chinae-mail: hsshen@mail.sjtu.edu.cn
J. Eng. Mater. Technol. Jul 2009, 131(3): 031010 (11 pages)
Published Online: May 29, 2009
Article history
Received:
October 24, 2008
Revised:
February 2, 2009
Published:
May 29, 2009
Citation
Shen, H. (May 29, 2009). "A Comparison of Post-buckling Behavior for FGM Cylindrical Shells With Piezoelectric Fiber Reinforced Composite Actuators." ASME. J. Eng. Mater. Technol. July 2009; 131(3): 031010. https://doi.org/10.1115/1.3120408
Download citation file:
Get Email Alerts
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Use of Functionally Graded Material Layers in a Two-Layered Pressure Vessel
J. Pressure Vessel Technol (October,2011)
Thermal Post-Buckling of Laminated Plates Comprising Functionally Graded Materials With Temperature-Dependent Properties
J. Appl. Mech (November,2004)
Small-Amplitude Free-Vibration Analysis of Piezoelectric Composite Plates Subject to Large Deflections and Initial Stresses
J. Vib. Acoust (February,2006)
Recent Advances on Composites and Heterogeneous Materials
J. Eng. Mater. Technol (January,2011)
Related Proceedings Papers
Related Chapters
Buckling of Shells of Revolution
Stress in ASME Pressure Vessels, Boilers, and Nuclear Components
Buckling of Shells of Revolution
Design of Plate and Shell Structures
Subsection NE—Class MC Components
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition