Common parameters between metallic and polymeric materials are the coefficient of restitution, the damping coefficient, and loss factor. Although the relationship between the coefficient of restitution and the loss factor is quite direct, their dependence on the damping coefficient is not so simple and mainly affected by the adopted model used to describe the material response under impact. In the present study, Kelvin–Voigt linear model and Hunt–Crossley complex model are analyzed to describe how the coefficient of restitution depends on the viscous damping coefficient of impact. The correlation between the theoretical models and the experimental data is also shown. A simple method to predict the impact damping factor of both polymeric and metallic materials from the measured temporal signal of the impact force is demonstrated.
Skip Nav Destination
Article navigation
January 2020
Research-Article
Models for Materials Damping, Loss Factor, and Coefficient of Restitution
Hany A. Sherif,
Hany A. Sherif
1
Professor
Department of Mechanical Engineering,
College of Engineering,
P.O. Box 6677,
Buraidah 51452,
e-mail: hasherif@qec.edu.sa
Department of Mechanical Engineering,
College of Engineering,
Qassim University
,P.O. Box 6677,
Buraidah 51452,
Saudi Arabia
e-mail: hasherif@qec.edu.sa
1Corresponding author.
Search for other works by this author on:
Fahad. A. Almufadi
Fahad. A. Almufadi
Associate Professor
Department of Mechanical Engineering,
College of Engineering,
P.O. Box 6677,
Buraidah 51452,
e-mail: almufadi@qec.edu.sa
Department of Mechanical Engineering,
College of Engineering,
Qassim University
,P.O. Box 6677,
Buraidah 51452,
Saudi Arabia
e-mail: almufadi@qec.edu.sa
Search for other works by this author on:
Hany A. Sherif
Professor
Department of Mechanical Engineering,
College of Engineering,
P.O. Box 6677,
Buraidah 51452,
e-mail: hasherif@qec.edu.sa
Department of Mechanical Engineering,
College of Engineering,
Qassim University
,P.O. Box 6677,
Buraidah 51452,
Saudi Arabia
e-mail: hasherif@qec.edu.sa
Fahad. A. Almufadi
Associate Professor
Department of Mechanical Engineering,
College of Engineering,
P.O. Box 6677,
Buraidah 51452,
e-mail: almufadi@qec.edu.sa
Department of Mechanical Engineering,
College of Engineering,
Qassim University
,P.O. Box 6677,
Buraidah 51452,
Saudi Arabia
e-mail: almufadi@qec.edu.sa
1Corresponding author.
Contributed by the Materials Division of ASME for publication in the Journal of Engineering Materials and Technology. Manuscript received March 19, 2019; final manuscript received July 1, 2019; published online August 2, 2019. Assoc. Editor: Khaled Morsi.
J. Eng. Mater. Technol. Jan 2020, 142(1): 011006 (12 pages)
Published Online: August 2, 2019
Article history
Received:
March 19, 2019
Revision Received:
July 1, 2019
Accepted:
July 16, 2019
Citation
Sherif, H. A., and Almufadi, F. A. (August 2, 2019). "Models for Materials Damping, Loss Factor, and Coefficient of Restitution." ASME. J. Eng. Mater. Technol. January 2020; 142(1): 011006. https://doi.org/10.1115/1.4044281
Download citation file:
Get Email Alerts
Cited By
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Related Articles
Hybrid Hollow Microlattices With Unique Combination of Stiffness and Damping
J. Eng. Mater. Technol (July,2018)
Thermal Joint Resistance of Polymer-Metal Rough Interfaces
J. Electron. Packag (March,2006)
Drag Reduction in Turbulent Flow With Polymer Additives
J. Fluids Eng (May,2009)
Interfacial Versus Cohesive Failure on Polymer-Metal Interfaces in Electronic Packaging—Effects of Interface Roughness
J. Electron. Packag (June,2002)
Related Chapters
Materials and Methods
Modified Detrended Fluctuation Analysis (mDFA)
Accurate Detection of Weld Defects Using Chirplet Transform
International Conference on Computer and Automation Engineering, 4th (ICCAE 2012)
Material Characterization by Thermomechanical Analysis: Industrial Applications
Materials Characterization by Thermomechanical Analysis