...Yupeng Zhang; Alan Needleman Instrumented indentation tests provide an attractive means for obtaining data to characterize the plastic response of engineering materials. One difficulty in doing this is that the relation between the measured indentation force versus indentation depth response...

...Kiyohiro Ito; Masayuki Arai The indentation formed on a metallic component by the high-velocity impingement of a small object can fracture the component, and this is known as foreign object damage. In this type of dynamic indentation, it is necessary to consider the effects of work hardening...

...James A. Mills; Hang Xiao; Xi Chen There have been many studies performed with respect to the indentation of thin films affixed to a corresponding substrate base. These studies have primarily focused on determining the mechanical properties of the film. It is the goal of this paper to further...

... investigation of the sensitivity of spherical indentation to experimental errors. The method is employed to investigate the reliability of various possible spherical indentation protocols, providing a ranking of the selected data reduction protocols from least to most sensitive to experimental errors. Explicit...

... in the carburized materials, it is worth considering how this parameter influences the surface indentation behavior of graded materials. This may be important in other graded materials, especially those containing mixtures of materials with differing hardening characteristics. In this analysis, the hardness...

... was made. X-ray diffraction analysis showed less decarburization of the nanocrystalline coating and a more homogeneous coating structure than the microcrystalline coating produced under the same spraying conditions. The mechanical assessment of the coatings was performed using microhardness and indentation...

...Lifeng Wang; Christine Ortiz; Mary C. Boyce The force-depth behavior of indentation into fibrillar-structured surfaces such as those consisting of forests of micro- or nanoscale tubes or rods is a depth-dependent behavior governed by compression, bending, and buckling of the nanotubes. Using...

...E. A. Baxevani; A. E. Giannakopoulos The present paper presents a relation between the vickers hardness HV and the loading stiffness C of instrumented vickers indentation of metal substrates. The relation is based on the fact that the nonaxisymmetry of the plastic deformation of the vickers...

...Eun-chae Jeon; Joo-Seung Park; Doo-Sun Choi; Kug-Hwan Kim; Dongil Kwon The instrumented indentation test, which measures indentation tensile properties, has attracted interest recently because this test can replace uniaxial tensile test. An international standard for instrumented indentation test...

... and then fabricated, modeled, and experimentally validated. To provide a unique biaxial stress state, a 60 mm diameter 10 mm thick disk of 316L stainless steel was plastically compressed through the thickness with an opposing 15 mm diameter hard steel indenters in the center of the disk. For validation, the stresses...

... strains and stresses are shown to develop during the cyclic loading. Localized tensile stress regions are shown to develop due to stress reversal and strain hardening during both loading and unloading regimes. Hardness predictions also indicate that nano-indentation hardness values of the contact material...

... capabilities have been used for this investigation. Two different tips were employed for indenting, one being a Berkovich diamond tip supplied by Hysitron, Inc., Minneapolis, MN and another being a parabolic tungsten tip, which was made in the laboratory. Indentations were performed within the interphase...

...Y. C. Lu; D. M. Shinozaki Large displacement micro-indentation tests have been performed on various polymeric solids to measure the plastic properties. Cylindrical flat-ended indenters with diameter in the range of 10 – 90 μ m are mostly used. The mechanism of large-strain indentation has been...

...D. A. Doman; R. Bauer; A. Warkentin The contact characteristics of ceramic-metallic interactions are of critical importance in the design of high-speed ceramic rolling contact bearings. This type of interaction is not described well by traditional indentation tests since small displacements...

...Chaiwut Gamonpilas; Esteban P. Busso A method that can determine uniquely the elastoplastic properties from indentation loading and unloading curves has been developed. It is based on finite element modeling and inverse analysis of two separate indenters. The approach was validated by numerical...

...). The mechanical behaviors of individual phases in the specimen materials were investigated using a nano-indentation technique. The wear resistance of the specimens was evaluated on a ball-on-disk tribometer. The experimental results revealed that the increased Mo content had significant effects on the mechanical...

... for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments ,” J. Mater. Res. 0884-2914 , 7 ( 4 ), pp. 1564 – 1583 . Sakai , M. , 1993 , “ Energy Principle of the IndentationInduced Inelastic Surface Deformation and Hardness of Brittle Materials ,” Acta...

...J. Yan; X. Chen; A. M. Karlsson An alternative, improved method to determine mechanical properties from indentation testing is presented. This method can determine the elastic modulus, yield strength and equi-biaxial residual stress from one simple test. Furthermore, the technique does not require...

... on the fracture behavior of materials. Side-punching consists of simultaneously indenting opposite faces of a plate of material with rigid tools, using sufficient force to cause localized yielding over a finite-sized volume of material adjacent to the punching tools. This paper presents experimental measurements...

... conductivity scanning electron microscopy transmission electron microscopy indentation crystal microstructure hardness solidification wear resistance stress measurement EDM white layer residual stress hole-drilling strain-gage method ASTM standard E837 Residual stress could exist...