The continuously improved performance of personal computers enables the real-time motion simulation of complex multibody systems, such as the whole model of an automobile, on a conventional PC, provided the adequate formulation is applied. There exist two big families of dynamic formulations, depending on the type of coordinates they use to model the system: global and topological. The former leads to a simple and systematic programming while the latter is very efficient. In this work, a hybrid formulation is presented, obtained by combination of one of the most efficient global formulations and one of the most systematic topological formulations. It shows, at the same time, easiness of implementation and a high level of efficiency. In order to verify the advantages that the new formulation has over its predecessors, the following four examples are solved using the three formulations and the corresponding results are compared: a planar mechanism which goes through a singular position, a car suspension with stiff behavior, a 6-dof robot with changing configurations, and the full model of a car vehicle. Furthermore, the last example is also analyzed using a commercial tool, so as to provide the readers with a well-known reference for comparison.
Skip Nav Destination
e-mail: javicuad@cdf.udc.es
Article navigation
July 2004
Technical Papers
A Combined Penalty and Recursive Real-Time Formulation for Multibody Dynamics
J. Cuadrado,
e-mail: javicuad@cdf.udc.es
J. Cuadrado
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
Search for other works by this author on:
D. Dopico,
D. Dopico
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
Search for other works by this author on:
M. Gonzalez,
M. Gonzalez
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
Search for other works by this author on:
M. A. Naya
M. A. Naya
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
Search for other works by this author on:
J. Cuadrado
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
e-mail: javicuad@cdf.udc.es
D. Dopico
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
M. Gonzalez
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
M. A. Naya
Dept. of Mechanical Engineering, University of La Corun˜a, Ferrol 15403, Spain
Contributed by the Mechanisms and Robotics Committee for publication in the JOURNAL OF MECHANICAL DESIGN. Manuscript received March 2003; revised December 2003. Associate Editor: J. S. Rastegar.
J. Mech. Des. Jul 2004, 126(4): 602-608 (7 pages)
Published Online: August 12, 2004
Article history
Received:
March 1, 2003
Revised:
December 1, 2003
Online:
August 12, 2004
Citation
Cuadrado, J., Dopico , D., Gonzalez , M., and Naya, M. A. (August 12, 2004). "A Combined Penalty and Recursive Real-Time Formulation for Multibody Dynamics ." ASME. J. Mech. Des. July 2004; 126(4): 602–608. https://doi.org/10.1115/1.1758257
Download citation file:
Get Email Alerts
DeepJEB: 3D Deep Learning-Based Synthetic Jet Engine Bracket Dataset
J. Mech. Des (April 2025)
Design and Justice: A Scoping Review in Engineering Design
J. Mech. Des (May 2025)
Related Articles
Kinematic Synthesis of a Six-Member Mechanism for Automotive Steering
J. Mech. Des (December,2002)
An Ordinary Differential Equation Formulation for Multibody Dynamics: Nonholonomic Constraints
J. Comput. Inf. Sci. Eng (March,2017)
An Ordinary Differential Equation Formulation for Multibody Dynamics: Holonomic Constraints
J. Comput. Inf. Sci. Eng (June,2016)
The Design of a Novel Pure-Rolling Transmission to Convert Rotational into Translational Motion
J. Mech. Des (March,2003)
Related Proceedings Papers
Related Chapters
Composing Elements and Kinematics Simulation of Three Gear-Plates Planet Drive with Small Teeth Difference Used in Robot
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Accuracy-associated Models
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy
FSF of Serial-kinematics Systems
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy