Abstract

This paper presents a method for identifying the optimal designs of components and joints in the space frame body structures of passenger vehicles considering structural characteristics, manufacturability, and assembleability. Dissimilar to our previous work based on graph decomposition, the problem is posed as a simultaneous determination of the locations and types of joints in a structure and the cross sections of the joined structural frames, selected from a predefined joint library. The joint library is a set of joint designs containing the geometry of the feasible joints at each potential joint location and the cross sections of the joined frames, associated with their structural characteristics as equivalent torsional springs obtained from the finite element analyses of the detailed joint geometry. Structural characteristics of the entire structure are evaluated by finite element analyses of a beam-spring model constructed from the selected joints and joined frames. Manufacturability and assembleability are evaluated as the manufacturing and assembly costs estimated from the geometry of the components and joints, respectively. The optimization problem is solved by a multiobjective genetic algorithm using a direct crossover. A case study on an aluminum space frame of a midsize passenger vehicle is discussed.

1.
Lyu
,
N.
, and
Saitou
,
K.
, 2002, “
Decomposition-Based Assembly Synthesis for Structural Stiffness
,”
J. Mech. Des.
1050-0472,
125
, pp.
452
463
.
2.
Lyu
,
N.
, and
Saitou
,
K.
, 2003, “
Decomposition-Based Assembly Synthesis of a 3D Body-in-White for Structural Stiffness
,”
Proc. of 2003 ASME IMECE and R&D Exposition
, Washington, D.C., IMECE2003-43130, An extended version has been accepted to
ASME J. Mech. Des.
1050-0472.
3.
Cetin
,
O
and
Saitou
,
K.
, 2003, “
Decomposition-Based Assembly Synthesis of Multiple Structures for Minimum Production Cost
,”
Proc. of 2003 ASME IMECE and R&D Exposition
, Washington, DC,
ASME
, New York, ASME Paper No. IMECE2003-43085.
4.
Jenkins
,
W. M.
, 1995, “
Neural Network-Based Approximations for Structural Analysis
,”
Developments in Neural Networks and Evolutionary Computing for Civil and Structural Engineering
, Civil-Comp Press, Edinburgh, UK, pp.
25
35
.
5.
Kang
,
H. T.
, and
Yoon
,
C. H.
, 1994, “
Neural Network Approaches to Aid Simple Truss Design Problem
,”
Microcomput. Civ. Eng.
0885-9507
9
, pp.
211
218
.
6.
Long
,
L.
, 1998,
Design-oriented Translators for Automotive Joints
, Ph.D. Thesis, Virginia Polytechnic Institute.
7.
Deb.
,
K.
,
Agrawal
,
S.
,
Pratab
,
A.
, and
Meyarivan
,
T.
, 2000, “
A Fast Elitist Non-Dominated Sorting Genetic Algorithm for Multi-Objective Optimization: NSGA-II
,” KanGAL Report 200001,
Indian Institute of Technology
, Kanpur, India.
8.
Pereira
,
F.
,
Machado
,
P.
,
Costa
,
E.
, and
Cardoso
,
A.
, 1999, “
Graph Based Crossover—A Case Study With the Busy Beaver Problem
,”
Proc. of 1999 Genetic and Evolutionary Computation Conf.
, Orlando, Morgan Kaufmann, San Francisco, California, pp. 1149–1155.
9.
Lyu
,
N.
, and
Saitou
,
K.
, 2003, “
Topology Optimization of Multi-component structures via Decomposition-based assembly synthesis
,”
Proc. of 2003 ASME DETC
, Chicago, ASME, New York, ASME Paper No. DETC2003/DAC-48730 (an extended version accepted by
J. Mech. Des.
1050-0472).
10.
Boothroyd
,
G.
and
Dewhurst
,
P.
, 1983,
Design for Assembly Handbook
,
University of Massachusetts
, Amherst, MA.
11.
Boothroyd
,
G.
,
Dewhurst
,
P.
, and
Knight
,
W.
, 1994,
Product Design for Manufacturing and Assembly
,
Marcel Dekker
, New York.
12.
Gupta
,
S. K.
,
Regli
,
W. C.
, and
Nau
,
D. S.
, 1994, “
Integrating DFM With CAD Through Design Critiquing
,”
Concurr. Eng. Res. Appl.
1063-293X,
2
, pp
85
95
.
13.
Yetis
,
A.
, and
Saitou
,
K.
, 2002, “
Decomposition-Based Assembly Synthesis Based on Structural Considerations
,”
J. Mech. Des.
1050-0472,
124
, pp.
593
601
.
14.
Lee
,
B.
, and
Saitou
,
K.
, 2003, “
Assembly Synthesis With Subassembly Partitioning for Optimal In-Process Dimensional Adjustability
,”
Proc. of 2003 ASME DETC
, Chicago, ASME, New York, ASME Paper No. DETC2003/DAC-48729.
15.
Chang
,
D.
, 1974, “
Effects of Flexible Connections on Body Structural Response
,”
SAE Trans.
0096-736X,
83
, pp.
233
244
.
16.
Lee
,
K.
, and
Nikolaidis
,
E.
, 1992, “
A Two-Dimensional Model for Joints in Vehicle Structures
,”
Comput. Struct.
0045-7949,
45
(
4
), pp.
775
784
.
17.
Kim
,
Y. Y.
,
Yim
,
H. H.
, and
Kang
,
J. H.
, 1995, “
Reconsideration of the Joint Modeling Technique: In a Box-Beam T-Joint
,” SAE Technical Paper No. 951108, pp.
275
279
.
18.
Kim
,
Y. Y.
, and
Kim
,
H. J.
,
, 2002, “
New Accurate Efficient Modeling Techniques for the Vibration Analysis of T-Joint Thin-Walled Box Structures
,”
Int. J. Solids Struct.
0020-7683,
39
, pp.
2893
2909
.
19.
Nishigaki
,
H.
,
Nishiwaki
,
S.
, and
Kikuchi
,
N.
, 2001, “
First Order Analysis—New CAE Tools for Automotive Body Designers
,” SAE Technical Paper No. 2001-01-0768,
Proc. of SAE 2001 World Congress
, Detroit, SAE, Warrendale, PA.
20.
Overhagh
,
W. H.
, 1995, “
Use of Aluminum in Automotive Space Frame
,” SAE Technical Paper No. 950721,
Int. Congress and Exposition
, Detroit.
21.
von Zengen
K.-H.
and
Leitermann
,
W.
, 1998, “
Space Frame—Quo Vadis
?” SAE Technical Paper No. 982401,
Int. Body Engineering Conf. and Exposition
, Detroit.
22.
Kelkar
,
A.
,
Roth
,
R.
, and
Clark
,
J.
, 2001, “
Automobile Bodies: Can Aluminum be an Economical Alternative to Steel
?”
JOM
1047-4838,
53
(
8
), pp.
28
32
.
23.
A.
Kelkar
, 2001,
Analysis of Aluminum in Auto Body Designs and its Strategic Implications for the Aluminum Industry
, M.S. thesis, MIT, Boston.
24.
Honda Automotive Company
, www.honda.com.
25.
Audi AG, www.audi.com.
26.
BMW, www.bmw.com.
27.
Ahmetoglu
,
M. A.
, 2000, “
Manufacturing of Structural Automotive Components from Extruded Aluminum Profiles
,” SAE Technical Paper No. 2000-01-2712,
Int. Body Engineering Conf.
, Detroit.
28.
Chung
,
T.
,
Lee
,
Y.
, and
Kim
,
C.
, 1995, “
Joint Design Approach for Aluminum Space Frame
,” SAE Technical Paper No. 950577,
Int. Congress and Exposition
, Detroit.
29.
Powell
,
H. J.
, and
Wiemer
,
K.
, 1999, “
Joining Technology for High Volume Manufacturing of Lightweight Vehicles
,”
The Welding Institute
, Cambridge, UK.
30.
Barnes
,
T. A.
, and
Pashby
,
I. R.
, 2000, “
Joining Techniques for Aluminum Spaceframes Used in Automobiles: Part I—Solid and Liquid Phase Welding
,”
J. Mater. Process. Technol.
0924-0136,
99
, pp.
62
71
.
31.
Barnes
,
T. A.
, and
Pashby
,
I. R.
, 2000, “
Joining Techniques for Aluminum Spaceframes Used in Automobiles: Part II—Adhesive Bonding and Mechanical Fasteners
,”
J. Mater. Process. Technol.
0924-0136,
99
, pp.
72
79
.
32.
Goldberg
E. R.
, and
Samtani
M. P.
, 1986, “
Engineering Optimization via the Genetic Algorithm
,”
9th Conf. on Electronic Computation
, New York,
ASCE
, pp.
471
82
.
33.
Brown
,
J. C.
,
Robertson
,
A. J.
, and
Serpento
,
S. T.
, 2002,
Motor Vehicle Structures: Concept and Fundamentals
,
SAE International
, pp.
68
69
.
34.
Chen
,
S.
,
Cowan
,
C.
, and
Grant
,
P. M.
, 1991, “
Orthogonal Least Squares Learning Algorithm for Radial Basis Function Networks
,”
IEEE Trans. Neural Netw.
1045-9227,
2
(
2
), pp.
302
309
.
35.
MATLAB,
The Language of Technical Computing
, 6.0.0.88, Release 12,
The MathWorks
.
You do not currently have access to this content.