A mathematical model of a horizontal wind turbine drivetrain is developed by applying the flexible multibody dynamics theory based on the Lagrange formulation. The proposed model accounts for the variation in the number of teeth in contact and support bearing elasticity, which are known to influence the dynamic behavior of drivetrain significantly. The derivation of the system governing equation by Lagrange equations requires the formulations of the kinetic energy terms of both orbiting and rotating gears, the potential energy terms of time-varying tooth stiffness and bearing compliance, and the work from input torque. From the resultant governing equations, the natural frequencies and modes of interest are calculated, and the effect of bearing stiffness on those modes is examined. The rotational vibrations of the sun gears as well as the tooth contact forces between the sun and planet and the ring and planet are analyzed in detail. Result of the dynamic transmission error as a function of gearbox speed is also predicted to understand the overall dynamic behavior of the drivetrain system.

1.
Özguven
,
H. N.
, and
Houser
,
D. R.
, 1988, “
Mathematical Models Used in Gear Dynamics—A Review
,”
J. Sound Vib.
0022-460X,
121
, pp.
383
411
.
2.
Kahraman
,
A.
, 1994, “
Planetary Gear Train Dynamics
,”
ASME J. Mech. Des.
0161-8458,
116
, pp.
713
720
.
3.
Parker
,
R. G.
,
Agashe
,
V.
, and
Vijayakar
,
S. M.
, 2000, “
Dynamic Response of a Planetary Gear System Using a Finite Element/Contact Mechanics Model
,”
ASME J. Mech. Des.
0161-8458,
122
, pp.
304
310
.
4.
Lin
,
J.
, and
Parker
,
R. G.
, 2002, “
Planetary Gear Parametric Instability Caused by Mesh Stiffness Variation
,”
J. Sound Vib.
0022-460X,
249
, pp.
129
145
.
5.
Ambarisha
,
V. K.
, and
Parker
,
R. G.
, 2007, “
Nonlinear Dynamics of Planetary Gears Using Analytical and Finite Element Models
,”
J. Sound Vibr.
,
302
, pp.
577
595
. 0022-460X
6.
Kiracofe
,
D.
, and
Parker
,
R. G.
, 2007, “
Structured Vibration Modes of General Compound Planetary Gear Systems
,”
ASME J. Vibr. Acoust.
0739-3717,
129
, pp.
1
16
.
7.
Ambarisha
,
V. K.
, and
Parker
,
R. G.
, 2006, “
Suppression of Planet Mode Response in Planetary Gear Dynamics Through Mesh Phasing
,”
ASME J. Vibr. Acoust.
0739-3717,
128
, pp.
133
142
.
8.
Ligata
,
H.
,
Kahraman
,
A.
, and
Singh
,
A.
, 2009, “
A Closed-Form Planet Load Sharing Formulation for Planetary Gear Sets Using a Translational Analogy
,”
ASME J. Mech. Des.
0161-8458,
131
(
2
), p.
021007
.
9.
He
,
S.
,
Rook
,
T.
, and
Singh
,
R.
, 2008, “
Construction of Semianalytical Solutions to Spur Gear Dynamics Given Periodic Mesh Stiffness and Sliding Friction Functions
,”
ASME J. Mech. Des.
0161-8458,
130
(
12
), p.
122601
.
10.
Sika
,
G.
, and
Velex
,
Ph.
, 2008, “
Analytical and Numerical Dynamic Analysis of Gears in the Presence of Engine Acyclism
,”
ASME J. Mech. Des.
0161-8458,
130
(
12
), p.
124502
.
11.
Jalon
,
J. G.
, and
Bayo
,
E.
, 1994,
Kinematic and Dynamic Simulation of Multibody Systems
,
Springer-Verlag
,
Berlin
.
12.
Wang
,
J. H.
,
Zhang
,
Q. W.
, and
Ren
,
H. B.
, 2003, “
Effect of Involute Contact Ratio on the Dynamic Performance of Spur Gear With No Tooth Profile Modification
,”
Chin. J. Mech. Eng.
0577-6686 (English edition),
16
, pp.
417
419
.
You do not currently have access to this content.