In this study, an optimization methodology is proposed to systematically define the optimal tooth modifications introduced by head-cutter geometry and machine-tool settings to minimize the influence of misalignments on the elastohydrodynamic (EHD) lubrication characteristics in face-hobbed spiral bevel gears. The goal is to simultaneously maximize the EHD load-carrying capacity of the oil film and to minimize power losses in the oil film when different misalignments are inherent in the gear pair. The proposed optimization procedure relies heavily on the EHD lubrication analysis developed in this paper. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. A drastic increase in the EHD load-carrying capacity of the oil film and a reduction in the power losses in the oil film were obtained.
Issue Section:
Research Papers
References
1.
Litvin
, F. L.
, 1972
, Theory of Gear Mesh
, Műszaki Könyvkiadó
, Budapest (in Hungarian)
, pp. 558
–575
.2.
Kato
, S.
, Ikebe
, H.
, and Hiramatsu
, J.
, 2009
, “Study on the Tooth Surface Modification of Hypoid Gear in Face Hob System
,” Proceedings of JSME International Conference on Motion and Power Transmissions
, Sendai
, pp. 109
–111
.
3.
Stadtfeld
, H. J.
, 2000
, The Basics of Gleason Face Hobbing
, Gleason Works
, pp. 1
–26
.4.
Lelkes
, M.
, Márialigeti
, J.
, and Play
, D.
, 2002
, “Numerical Determination of Cutting Parameters for the Control of Klingelnberg Spiral Bevel Gear Geometry
,” ASME J. Mech. Des.
, 124
(4), pp. 761
–771
.10.1115/1.15185025.
Fan
, Q.
, 2006
, “Computerized Modeling and Simulation of Spiral Bevel and Hypoid Gears Manufactured by Gleason Face Hobbing Process
,” ASME J. Mech. Des.
, 128
(6), pp. 1315
–1327
.10.1115/1.23373166.
Fan
, Q.
, 2007
, “Enhanced Algorithms of Contact Simulation for Hypoid Gear Drives Produced by Face-Milling and Face-Hobbing Processes
,” ASME J. Mech. Des.
, 129
(1), pp. 31
–37
.10.1115/1.23594757.
Fan
, Q.
, 2010
, “Tooth Surface Error Corrections for Face-Hobbed Hypoid Gears
,” ASME J. Mech. Des.
, 132
(1), p. 011004
.10.1115/1.40006468.
Shih
, Y. P.
, Fong
, Z. H.
, and Lin
, D. C. Y.
, 2007
, “Mathematical Model for a Universal Face Hobbing Hypoid Gear Generator
,” ASME J. Mech. Des.
, 129
(1), pp. 38
–47
.10.1115/1.23594719.
Shih
, Y. P.
, and Fong
, Z. H.
, 2007
, “Flank Modification Methodology for Face-Hobbing Hypoid Gears Based on Ease-Off Topology
,” ASME J. Mech. Des.
, 129
(12), pp. 1294
–1302
.10.1115/1.277988910.
Shih
, Y. P.
, and Fong
, Z. H.
, 2008
, “Flank Correction for Spiral Bevel and Hypoid Gears on a Six-Axis CNC Hypoid Generator
,” ASME J. Mech. Des.
, 130
(6
), p. 062604
.10.1115/1.289011211.
Vimercati
, M.
, 2007
, “Mathematical Model for Tooth Surfaces Representation of Face-hobbed Hypoid Gears and Its Application to Contact Analysis and Stress Calculation
,” Mech. Mach. Theory
, 42
, pp. 668
–690
.10.1016/j.mechmachtheory.2006.06.00712.
Artoni
, A.
, Bracci
, A.
, Gabaccini
, M.
, and Guiggiani
, M.
, 2009
, “Optimization of the Loaded Contact Pattern in Hypoid Gears by Automatic Topography Modification
,” ASME J. Mech. Des.
, 131
(1
), p. 011008
.10.1115/1.301384413.
Gabiccini
, M.
, Bracci
, A.
, and Guiggiani
, M.
, 2010
, “Robust Optimization of the Loaded Contact Pattern in Hypoid Gears With Uncertain Misalignments
,” ASME J. Mech. Des.
, 132
(4
), p. 041010
.10.1115/1.400148514.
Artoni
, A.
, Kolivand
, M.
, and Kahraman
, A.
, 2010
, “An Ease-off Based Optimization of the Loaded Transmission Error of Hypoid Gears
,” ASME J. Mech. Des.
, 132
(1
), p. 011010
.10.1115/1.400064515.
Artoni
, A.
, Gabiccini
, M.
, Guiggiani
, M.
, and Kahraman
, A.
, 2011
, “Multi-Objective Ease-Off Optimization of Hypoid Gears for Their Efficiency, Noise, and Durability Performances
,” ASME J. Mech. Des.
, 133
(6
), p. 121007
.10.1115/1.400523416.
Dowson
, D.
, and Higginson
, G. R.
, 1966
, “A Theory of Involute Gear Lubrication
,” Proceedings of Institute of Petroleum
, Gear Lubrication Symposium
, II.8.17.
Johnson
, K. L.
, and Greenwood
, J. A.
, 1980
, “Thermal Analysis of an Eyring Fluid in Elastohydrodynamic Traction
,” Wear
, 61
, p. 353
–374
.10.1016/0043-1648(80)90298-718.
Evans
, C. R.
, and Johnson
, K. L.
, 1986
, “The Rheological Properties of Elastohydrodynamic Lubricants
,” Proc. Inst. Mech. Eng., Part C
, 200
(5
), pp. 303
–312
.10.1243/PIME_PROC_1986_200_134_0219.
Evans
, C. R.
, and Johnson
, K. L.
, 1986
, “Regimes of Traction in EHD Lubrication
,” Proc. Inst. Mech. Eng., Part C
, 200
(5
), pp. 313
–324
.10.1243/PIME_PROC_1986_200_135_0220.
Houpert
, L.
, 1985
, “New Results of Traction Force Calculations in Elastohydrodynamic Contacts
,” ASME J. Lubr. Technol.
, 107
(2), pp. 241
–248
.10.1115/1.326103321.
Olver
, A. V.
, and Spikes
, H. A.
, 1998
, “Prediction of Traction in Elastohydrodynamic Lubrication
,” Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol.
, 212
, pp. 321
–332
.10.1243/135065098154213722.
Gu
, A.
, 1973
, “Elastohydrodynamic Lubrication of Involute Gears
,” ASME J. Eng. Ind.
, 95
(4), pp. 1164
–1170
.10.1115/1.343826523.
Akin
, L. S.
, 1974
, “EHD Lubricant Film Thickness Formulas for Power Transmission Gears
”, ASME J. Lubr. Technol.
, 96
(3), pp. 426
–431
.10.1115/1.345198924.
Martin
, K. F.
, 1981
, “The Efficiency of Involute Spur Gears
,” 1981, ASME J. Mech. Des.
, 103
(1), pp. 160
–169
.10.1115/1.325485525.
Anderson
, N. E.
, and Loewenthal
, S. H.
, 1980
, “Effect of Geometry and Operating Conditions on Spur Gear System Power Loss
,” ASME J. Mech. Des.
, 103
(1), pp. 151–159.10.1115/1.325485426.
Matsumoto
, S.
, Asanabe
, S.
, Takano
, K.
, and Yomamoto
, M.
, 1985
, “Evaluation Method of Power Loss in High-Speed Gears
,” Proceedings of JSLE International Tribology Conference
, Tokyo
, pp. 1165
–1170
.
27.
Bathgate
, J.
, and Jates
, F.
, 1970
, “The Application of Film Thickness, Flash Temperature and Surface Fatigue Criteria to Worm Gears
,” ASLE
, 13
, pp. 21
–28
.10.1080/0569819700897227828.
Winter
, H.
, and Wilkesmann
, H.
, 1981
, “Calculation of Cylindrical Worm Gear Drives of Different Tooth Profiles
,” ASME J. Mech. Des.
, 103
(1), pp. 73
–82
.10.1115/1.325488929.
Wang
, K. L.
, and Cheng
, H. S.
, 1981
, “A Numerical Solution to the Dynamic Load, Film Thickness and Surface Temperatures in Spur Gears, Part I—Analysis
,” ASME J. Mech. Des.
, 103
(1), pp. 177
–187
.10.1115/1.325485930.
Wang
, K. L.
, and Cheng
, H. S.
, 1981
, “A Numerical Solution to the Dynamic Load, Film Thickness and Surface Temperatures in Spur Gears, Part II—Results
,” ASME J. Mech. Des.
, 103
(1), pp. 188
–194
.10.1115/1.325486031.
Simon
, V.
, 1981
, “Elastohydrodynamic Lubrication of Hypoid Gears
,” ASME J. Mech. Des.
, 103
(1), 195
–203
.10.1115/1.325486332.
Simon
, V.
, 1981
, “Load Capacity and Efficiency of Spur Gears in Regard to Thermo-EHD Lubrication
,” Proceedings of International Symposium on Gearing and Power Transmissions
, Tokyo
, Vol. I
, pp. 299
–306
.33.
Simon
, V.
, 1985
, “Thermoelastohydrodynamic Analysis of Lubrication of Worm Gears
,” Proceedings of JSLE Tribology Conference
, Tokyo
, pp. 1147
–1152
.34.
Simon
, V.
, 1987
, “Power Losses in High Speed Spur and Helical Gears
,” Proceedings, Seventh World Congress on the Theory of Machines and Mechanisms
, Sevilla
, pp. 1443
–1446
.35.
Simon
, V.
, 1988
, “Thermo-EHD Analysis of Lubrication of Helical Gears
,” ASME J. Mech. Trans. Auto. Des.
, 110
(3), pp. 330
–336
.10.1115/1.326746636.
Simon
, V.
, 1990
, “EHD Lubrication of Double Enveloping Worm Gears
,” Proceedings of Japan International Tribology Conference
, Nagoya
, pp. 1527
–1532
.
37.
Simon
, V.
, 1997
, “EHD Lubrication Characteristics of a New Type of Ground Cylindrical Worm Gear Drive
,” ASME J. Mech. Des.
, 119
(1), pp. 101
–107
.10.1115/1.282877038.
Simon
, V.
, 2009
, “Influence of Machine Tool Setting Parameters on EHD Lubrication in Hypoid Gears
,” Mech. Mach. Theory
, 44
, pp. 923
–937
.10.1016/j.mechmachtheory.2008.06.00539.
Simon
, V.
, 2010
, “EHD Lubrication in Spiral Bevel Gears
,” Proceedings of 2010 STLE Annual Meeting and Exhibition
, Las Vegas
, Paper No. 729834, pp. 1
–3
.40.
Sato
, M.
, and Takanashi
, S.
, 1981
, “On the Thermo-Elastohydrodynamic Lubrication of the Involute Gear
,” Proceedings of International Symposium on Gearing and Power Transmissions
, Tokyo
, vol. I
, pp. 307
–312
.41.
Wu
, H.
, and Huang
, W.
, 1988
, “Full Thermal EHD Analysis on the Cylindrical Worm Gearing With Double Circle Arc Profile
,” Proceedings of International Conference on Gearing
, Zhengzhou
, China pp. 489
–494
.42.
Huang
, C.
, Wen
, S.
, and Huang
, P.
, 1993
, “Multilevel Solution of the Elastohydrodynamic Lubrication of Concentrated Contacts in Spiroid Gears
,” ASME J. Tribol.
, 115
, pp. 481
–486
.10.1115/1.292166343.
Yu
, T.
, Zhang
, S.
, and Li
, J.
, 1997
, “A New Numerical Method for the Solution of Helical Gear Thermal EHL Problem
,” Proceedings of MTM'97 International Conference on Mechanical Transmissions and Mechanisms
, Tianjin
, pp. 840
–842
.44.
He
, H.
, and Wei
, Y.
, 1977
, “Analysis of Elastohydrodynamic Lubrication of Plane Re-Enveloping Hourglass Worm Gearing
,” Proceedings of MTM'97 International Conference on Mechanical Transmissions and Mechanisms
, Tianjin
, pp. 660
–663
.45.
Kong
, S.
, Sharif
, K.
, Evans
, H. P.
, and Snidle
, R. W.
, 2011
, “Elastohydrodynamics of a Worm Gear Contact
,” ASME J. Tribol.
, 123
(2), pp. 268
–275
.10.1115/1.130800346.
Yuan
, Q.
, Sun
, D. C.
, and Brewe
, D. E.
, 1998
, “Study of Hybrid Lubrication at the Tooth Contact of a Wormgear Transmission
,” ASME J. Tribol.
, 120
(1), pp. 103
–118
.10.1115/1.283417247.
Bercsey
, T.
, and Horak
, P.
, 2002
, “Modelling of the Contact- and Tribological Relations of Spatial Gear Pairs
,” Proceedings of International Conference on Gears
, VDI-Berichte 1665, Münich
, pp. 91
–105
.48.
Napel
, W. E.
, Lubrecht
, A. A.
, and Bosma
, R.
, 1986
, “Elastohydrodynamic Lubrication of Gear Teeth: Recent Developments
,” Proceedings of 2nd World Congress on Gearing
, Paris
, pp. 449
–459
.49.
Tan
, J.
, Yamada
, T.
, and Hattori
, N.
, 1991
, “Effects of Sliding/Rolling Contact on Worm Gear Lubrication
,” Proceedings of JSME International Conference on Motion and Power Transmissions
, Tokyo
, pp. 1123
–1127
.50.
Winter
, H.
, Höhn
, B. R.
, Michaelis
, K.
, and Kagerer
, E.
, 1991
, “Measurement of Pressure, Temperature and Film Thickness in Disk and Gear Contacts
,” Proceedings of JSME International Conference on Motion and Power Transmissions
, Hiroshima
, Japan, pp. 1038
–1042
.51.
Arto
, L.
, and Asko
, R.
, 1999
, “Evaluation of Power Loss in Spur Gear Systems
,” Proceedings of Tenth World Congress on the Theory of Machines and Mechanisms
,” Oulu
, Finland, pp. 2367
–2373
.52.
Jia
, Y.
, and Guo
, X.
, 1994
, “Multilevel Solution of Elastohydrodynamically Lubricated Hypoid Gears
,” Proceedings of International Gearing Conference
, Newcastle upon Tyne
, UK, pp. 329
–334
.53.
Yi
, J.
, and Chenwen
, C.
, 1996
, “The Effects of Geometry and Cutting Parameters upon Lubrication Performance of Hypoid Gears and Analysis of the Contact Geometry and Sliding Velocities during Meshing of Hypoid Gears
,” Proceedings of International Conference on Gears
, Dresden
, Germany, pp. 979
–985
.54.
Handschuh
, R. F.
, and Kicher
, T. P.
, 1996
, “A Method for Thermal Analysis of Spiral Bevel Gears
,” ASME J. Mech. Des.
, 118
(4), pp. 580
–585
.10.1115/1.282693255.
Holmes
, M. J. A.
, Evans
, H. P.
, and Snidle
, R. W.
, 2005
, “Analysis of Mixed Lubrication Effects in Simulated Gear Tooth Contacts
,” ASME J. Tribol.
, 127
(1), pp. 61
–69
.10.1115/1.182845256.
Xu
, H.
, Kahraman
, A.
, Anderson
, N. E.
, and Maddock
, D. G.
, 2007
, “Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs
,” ASME J. Mech. Des.
, 129
(1), pp. 58
–68
.10.1115/1.235947857.
Höhn
, B. R.
, Michaelis
, K.
, and Otto
, H. P.
, 2008
, “Influence of Immersion Depth of Dip Lubricated Gears on Power Loss, Bulk Temperature and Scuffing Load Carrying Capacity
,” Int. J. Mech. Mater. Des.
, 4
(2), pp. 145
–156
.10.1007/s10999-007-9045-z58.
Cheon
, G. J.
, 2009
, “Analysis of the Nonlinear Behavior of Gear Pairs Considering Hydrodynamic Lubrication and Sliding Friction
,” J. Mech. Sci. Technol.
, 23
, pp. 2125
–2137
.10.1007/s12206-009-0623-x59.
Huang
, H. Z.
, Niu
, X. C.
, and Yuan
, Y. Y.
, 2009
, “Thermal Elastohydrodynamic Lubrication Analysis for Point Contact Transmission
,” Proceedings of ASME 2009 International Mechanical Engineering Congress and Exposition
, Lake Buena Vista
, FL, 4
, pp. 559
–565
.60.
Kolivand
, M.
, Li
, S.
, and Kahraman
, A.
, 2010
, “Prediction of Mechanical Gear Mesh Efficiency of Hypoid Gear Pairs
,” Mech. Mach. Theory
, 45
, pp. 1568
–1582
.10.1016/j.mechmachtheory.2010.06.01561.
Li
, S.
, and K China, ahraman
, A.
, 2010
, “A Transient Mixed Elastohydrodynamic Lubrication Model for Spur Gear Pairs
,” ASME J. Tribol.
, 132
(1
), p. 011501
10.1115/1.4000270.62.
Li
, S.
, Kahraman
, A.
, and Klein
, M.
, 2012
, “A Fatigue Model for Spur Gear Contacts Operating Under Mixed Elastohydrodynamic Lubrication Conditions
,” ASME J. Mech. Des.
, 134
(4), pp. 041007
.10.1115/1.400565563.
Liu
, H.
, Mao
, K.
, Zhu
, C.
, and Xu
, X.
, 2012
, “Mixed Lubricated Line Contact Analysis for Spur Gears Using a Deterministic Model
,” ASME J. Tribol.
, 134
(2), p. 021501
.10.1115/1.400577164.
Saribay
, Z. B.
, Bill
, R. C.
, Smith
, E. C.
, and Rao
, S. B.
, 2012
, “Elastohydrodynamic Lubrication Analysis of Conjugate Meshing Face Gear Pairs
,” Helicopter Society
, 57
(3), pp. 1-10
.65.
Mohammadpour
, M.
, Theodossiades
, S.
, and Rahnejat
, H.
, 2012
, “Elastohydrodynamic Lubrication of Hypoid Gear Pairs at High Loads
,” Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol.
, 226
(J3
), pp. 183
–198
.10.1177/135065011143102766.
Karagiannis
, I.
, Theodossiades
, S.
, and Rahnejat
, H.
, 2012
, “On the Dynamics of Lubricated Hypoid Gears
,” Mech. Mach. Theory
, 48
, p. 94
–120
.10.1016/j.mechmachtheory.2011.08.01267.
De la Cruz
, M.
, Chong
, W. W. F.
, Teodorescu
, M.
, Theodossiades
, S.
, and Rahnejat
, H.
, 2012
, “Transient Mixed Thermo-Elastohydrodynamic Lubrication in Multi-Speed Transmissions
,” Tribol. Int.
, 49
, pp. 17
–29
.10.1016/j.triboint.2011.12.00668.
Kim
, S. H.
, Shin
, M. C.
, Byon
, J. W.
, O
, K. H.
, and Chu
, C. N.
, 2012
, “Efficiency Prediction of Worm Gear With Plastic Worm Wheel
,” Int. J. Prec. Eng. Man.
, 13
, pp. 167
–174
.10.1007/s12541-012-0021-769.
Simon
, V.
, 2011
, “Influence of Tooth Modifications on Tooth Contact in Face–Hobbed Spiral Bevel Gears
,” Mech. Mach. Theory
, 46
, pp. 1980
–1998
.10.1016/j.mechmachtheory.2011.05.00270.
Roelands
, C. J.
, 1966
, “Correlational Aspects of the Viscosity-Temperature-Pressure Relationship
,” Doctoral Thesis, Technological University of Deft
.71.
Kolda
, T. G.
, Lewis
, R. M.
, and Torczon
, V.
, 2003
, “Optimization by Direct Search: New Perspectives on Some Classical and Modern Methods
,” SIAM Rev.
, 45
(3
), pp. 385
–482
.10.1137/S00361445024288972.
Hooke
, R.
, and Jeeves
, T. A.
, 1961
, “Direct Search Solution of Numerical and Statistical Problem
,” J. Assoc. Comput. Mach.
, 8
(2
), pp. 212
–229
.10.1145/321062.32106973.
Simon
, V.
, 2012
, “Elastohydrodynamic Lubrication Analysis in Face-Hobbed Spiral Bevel Gears
,” Proceedings of the 7th International Conference KOD 2012 on Machine and Industrial Design in Mechanical Engineering
, Balatonfüred
, Hungary, pp. 349
–356
.Copyright © 2014 by ASME
You do not currently have access to this content.
