In this paper, we propose a new explosive bonding method for bonding materials by using the underwater shock wave from the explosion of explosives in water. This method is especially suitable to bond the materials with thin thickness and largely dissimilar property. In bonding those materials, the shock pressure and the moving velocity of shock wave on the flyer plate should be precisely managed to achieve an optimum bonding conditions. In this method, the bonding conditions can be controlled by varying of the space distance between the explosive and the flyer plate or by inclining the explosive charge with the flyer plate. We made the experiment of this technique bond the amorphous film with the steel plate. A satisfactory result was gained. At the same time, numerical analysis was performed to investigate the bonding conditions. The calculated deformation of the flyer plate by the action of underwater shock wave was compared with the experimental recordings by high-speed camera under the same conditions. The comparison shows that the numerical analysis is of good reliability on the prediction of the experimental result. Furthermore, the numerical simulation also gives the deformations of the flyer and the base plate, and the pressure and its variation during the collision process.
Skip Nav Destination
Article navigation
November 2001
Technical Papers
An Investigation on Underwater Explosive Bonding Process
Hirofumi Iyama,
Hirofumi Iyama
Department of Mechanical and Electrical Engineering, Yatsushiro National College of Technology, Kumamoto 866-8501, Japan
Search for other works by this author on:
Akio Kira,
Akio Kira
Department of Mechanical Engineering, Sojo University, Kumamoto 860-8691, Japan
Search for other works by this author on:
Masahiro Fujita,
Masahiro Fujita
Department of Mechanical Engineering, Sojo University, Kumamoto 860-8691, Japan
Search for other works by this author on:
Shiro Kubota,
Shiro Kubota
Department of Earth Resources, Engineering, Kyushu University, Fukuoka 812-8581, Japan
Search for other works by this author on:
Kazuyuki Hokamoto,
Kazuyuki Hokamoto
Department of Mechanical Engineering and Materials Science, Kumamoto University, Kumamoto 860-8555, Japan
Search for other works by this author on:
Shigeru Itoh
Shigeru Itoh
Shock Wave and Condensed Matter, Research Center, Kumamoto University, Kumamoto 860-8555, Japan
Search for other works by this author on:
Hirofumi Iyama
Department of Mechanical and Electrical Engineering, Yatsushiro National College of Technology, Kumamoto 866-8501, Japan
Akio Kira
Department of Mechanical Engineering, Sojo University, Kumamoto 860-8691, Japan
Masahiro Fujita
Department of Mechanical Engineering, Sojo University, Kumamoto 860-8691, Japan
Shiro Kubota
Department of Earth Resources, Engineering, Kyushu University, Fukuoka 812-8581, Japan
Kazuyuki Hokamoto
Department of Mechanical Engineering and Materials Science, Kumamoto University, Kumamoto 860-8555, Japan
Shigeru Itoh
Shock Wave and Condensed Matter, Research Center, Kumamoto University, Kumamoto 860-8555, Japan
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division, December 17, 2000; revised manuscript received May 23, 2001. Associate Editor: Y. W. Kwon.
J. Pressure Vessel Technol. Nov 2001, 123(4): 486-492 (7 pages)
Published Online: May 23, 2001
Article history
Received:
December 17, 2000
Revised:
May 23, 2001
Citation
Iyama, H., Kira , A., Fujita, M., Kubota, S., Hokamoto, K., and Itoh, S. (May 23, 2001). "An Investigation on Underwater Explosive Bonding Process ." ASME. J. Pressure Vessel Technol. November 2001; 123(4): 486–492. https://doi.org/10.1115/1.1388007
Download citation file:
Get Email Alerts
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
A Method for Producing Extra-High Dynamic Pressure Due to the Efficient Use of High Explosive
J. Pressure Vessel Technol (May,2004)
Wave Propagation in Partially Saturated Soils
Appl. Mech. Rev (July,2006)
High Pressure Generation Using Underwater Explosion of a Spiral Explosive in a Conical Vessel
J. Pressure Vessel Technol (May,2004)
The Performance of Pressure Vessel Using Concentric Double Cylindrical High Explosive
J. Pressure Vessel Technol (November,2004)
Related Proceedings Papers
Related Chapters
External Events PSA for Ringhals 2 PWR (PSAM-0159)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
PSA Level 2 — NPP Ringhals 2 (PSAM-0156)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)
The Behavior of Dispersed and Nondispersed Fuels in a Sewer System
Oil Dispersants: New Ecological Approaches