The paper investigates the response of elbows under in-plane bending and pressure, through nonlinear finite element tools, supported by experimental results from real-scale tests. The finite element analysis is mainly based on a nonlinear three-node “tube element,” capable of describing elbow deformation in a rigorous manner, considering geometric and material nonlinearities. Furthermore, a nonlinear shell element from a general-purpose finite element program is employed in some special cases. Numerical results are compared with experimental data from steel elbow specimens. The comparison allows the investigation of important issues regarding deformation and ultimate capacity of elbows, with emphasis on relatively thin-walled elbows. The results demonstrate the effects of pressure and the influence of straight pipe segments. Finally, using the numerical tools, failure of elbows under bending moments is examined (cross-sectional flattening or local buckling), and reference to experimental observations is made.
Skip Nav Destination
e-mail: skara@mie.uth.gr
Article navigation
November 2003
Technical Papers
Nonlinear Response and Failure of Steel Elbows Under In-Plane Bending and Pressure
S. A. Karamanos,
e-mail: skara@mie.uth.gr
S. A. Karamanos
Department of Mechanical and Industrial Engineering, University of Thessaly, Volos 38334, Greece
Search for other works by this author on:
E. Giakoumatos,
E. Giakoumatos
Department of Mechanical and Industrial Engineering, University of Thessaly, Volos 38334, Greece
Search for other works by this author on:
A. M. Gresnigt
A. M. Gresnigt
Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft 2600 GA, The Netherlands
Search for other works by this author on:
S. A. Karamanos
Department of Mechanical and Industrial Engineering, University of Thessaly, Volos 38334, Greece
e-mail: skara@mie.uth.gr
E. Giakoumatos
Department of Mechanical and Industrial Engineering, University of Thessaly, Volos 38334, Greece
A. M. Gresnigt
Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft 2600 GA, The Netherlands
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division November 17, 2002; revision received June 4, 2003. Associate Editor: R. J. Scavuzzo.
J. Pressure Vessel Technol. Nov 2003, 125(4): 393-402 (10 pages)
Published Online: November 4, 2003
Article history
Received:
November 17, 2002
Revised:
June 4, 2003
Online:
November 4, 2003
Citation
Karamanos, S. A., Giakoumatos, E., and Gresnigt, A. M. (November 4, 2003). "Nonlinear Response and Failure of Steel Elbows Under In-Plane Bending and Pressure ." ASME. J. Pressure Vessel Technol. November 2003; 125(4): 393–402. https://doi.org/10.1115/1.1613949
Download citation file:
Get Email Alerts
Related Articles
Failure of Locally Buckled Pipelines
J. Pressure Vessel Technol (May,2007)
Ultimate Bending Capacity and Buckling of Pressurized 90 deg Steel Elbows
J. Pressure Vessel Technol (August,2006)
Buckling Design of Confined Steel Cylinders Under External Pressure
J. Pressure Vessel Technol (February,2011)
Buckling of Barreled Shells Subjected to External Hydrostatic Pressure
J. Pressure Vessel Technol (May,2001)
Related Proceedings Papers
Related Chapters
Section VIII: Division 2–Alternative Rules
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 2, Sixth Edition
Subsection NB—Class 1 Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition
Testing of Pinned-End Steel Columns
Test Methods for Compression Members