This paper deals with some studies carried out in the bolted flanged connection committee (BFC) in Japan Pressure Vessel Council (JPVRC) on the stress analysis of a pipe flange connection using the elastoplastic finite element method. The characteristics of the connections with the different nominal diameters from to such as the contact gasket stress distribution, the hub stress, and the load factors were examined. The results from the finite element analyses were fairly consistent with the experimental results concerning the variation in the axial bolt force. By using the contact stress distributions and the results of the leakage test, the new gasket constants were evaluated. As a result, it was found that the variations in the contact stress distributions were substantial due to the flange rotation in the pipe flange connections with the larger nominal diameter. A method to determine the bolt preload for a given tightness parameter was demonstrated and the difference in the bolt preload between our research and PVRC was shown. In addition, the characteristics of pipe flange connection under a bending moment and internal pressure were also discussed and a newly developed bolt tightening method was demonstrated.
Skip Nav Destination
Article navigation
February 2006
Research Papers
New Development in Studies on the Characteristics of Bolted Pipe Flange Connections in JPVRC
Toshiyuki Sawa,
Toshiyuki Sawa
Mem. ASME
Department of Mechanical Engineering, Graduate School of Engineering,
Hiroshima University
, Hiroshima, Japan
Search for other works by this author on:
Satoshi Nagata,
Satoshi Nagata
Toyo Engineering
, Narashïno, Chiba, Japan
Search for other works by this author on:
Hirokazu Tsuji
Hirokazu Tsuji
Department of Intelligent Mechanical Engineering, Faculty of Science and Engineering,
Tokyo Denki University
, Saitama, Japan
Search for other works by this author on:
Toshiyuki Sawa
Mem. ASME
Department of Mechanical Engineering, Graduate School of Engineering,
Hiroshima University
, Hiroshima, Japan
Satoshi Nagata
Toyo Engineering
, Narashïno, Chiba, Japan
Hirokazu Tsuji
Department of Intelligent Mechanical Engineering, Faculty of Science and Engineering,
Tokyo Denki University
, Saitama, JapanJ. Pressure Vessel Technol. Feb 2006, 128(1): 103-108 (6 pages)
Published Online: October 21, 2005
Article history
Received:
September 30, 2005
Revised:
October 21, 2005
Citation
Sawa, T., Nagata, S., and Tsuji, H. (October 21, 2005). "New Development in Studies on the Characteristics of Bolted Pipe Flange Connections in JPVRC." ASME. J. Pressure Vessel Technol. February 2006; 128(1): 103–108. https://doi.org/10.1115/1.2140799
Download citation file:
Get Email Alerts
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)
Related Articles
Analysis of Thermal and Mechanical Behavior of Pipe Flange Connections by Taking Account of Gasket Compression Characteristics at Elevated Temperature
J. Pressure Vessel Technol (April,2012)
Stress Analysis and Determination of Bolt Preload in Pipe Flange Connections With Gaskets Under Internal Pressure
J. Pressure Vessel Technol (November,2002)
Stress Analysis and Sealing Performance Evaluation in Rectangular Box-Shape Bolted Flange Connection With Gasket Subjected to Internal Pressure
J. Pressure Vessel Technol (April,2011)
Finite Element Simulation of Bolt-Up Process of Pipe Flange Connections With Spiral Wound Gasket
J. Pressure Vessel Technol (November,2003)
Related Proceedings Papers
Related Chapters
Standardization of Valves, Flanges, Fittings and Gaskets (ASME B16 Standard)
Continuing and Changing Priorities of the ASME Boiler & Pressure Vessel Codes and Standards
Flexibility Analysis
Process Piping: The Complete Guide to ASME B31.3, Fourth Edition
Interface with Stationary Equipment
Pipe Stress Engineering