The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code specifies design curves for the fatigue life of structural materials in nuclear power plants. However, the effects of light water reactor (LWR) coolant environments were not explicitly considered in the development of the design curves. The existing fatigue-strain-versus-life data indicate potentially significant effects of LWR coolant environments on the fatigue resistance of pressure vessel and piping steels. Under certain environmental and loading conditions, fatigue lives in water relative to those in air can be a factor of 15 lower for austenitic stainless steels and a factor of lower for carbon and low-alloy steels. This paper reviews the current technical basis for the understanding of the fatigue of piping and pressure vessel steels in LWR environments. The existing fatigue data have been evaluated to identify the various material, environmental, and loading parameters that influence fatigue crack initiation and to establish the effects of key parameters on the fatigue life of these steels. Statistical models are presented for estimating fatigue life as a function of material, loading, and environmental conditions. An environmental fatigue correction factor for incorporating the effects of LWR environments into ASME Code fatigue evaluations is described. This paper also presents a critical review of the ASME Code fatigue design margins of 2 on stress (or strain) and 20 on life and assesses the possible conservatism in the current choice of design margins.
Skip Nav Destination
Article navigation
April 2009
Research Papers
A Review of the Effects of Coolant Environments on the Fatigue Life of LWR Structural Materials
O. K. Chopra,
O. K. Chopra
Nuclear Engineering Division,
Argonne National Laboratory
, Argonne, IL 60439
Search for other works by this author on:
W. J. Shack
W. J. Shack
Nuclear Engineering Division,
Argonne National Laboratory
, Argonne, IL 60439
Search for other works by this author on:
O. K. Chopra
Nuclear Engineering Division,
Argonne National Laboratory
, Argonne, IL 60439
W. J. Shack
Nuclear Engineering Division,
Argonne National Laboratory
, Argonne, IL 60439J. Pressure Vessel Technol. Apr 2009, 131(2): 021409 (21 pages)
Published Online: January 23, 2009
Article history
Received:
July 19, 2007
Revised:
January 2, 2008
Published:
January 23, 2009
Citation
Chopra, O. K., and Shack, W. J. (January 23, 2009). "A Review of the Effects of Coolant Environments on the Fatigue Life of LWR Structural Materials." ASME. J. Pressure Vessel Technol. April 2009; 131(2): 021409. https://doi.org/10.1115/1.3027496
Download citation file:
Get Email Alerts
Related Articles
Proposed New Fatigue Design Curves for Carbon and Low-Alloy Steels in
High Temperature Water
J. Pressure Vessel Technol (April,2009)
Effect of Light Water Reactor Water Environments on the Fatigue Life of Reactor Materials
J. Pressure Vessel Technol (December,2017)
Review and Consideration of Unsettled Problems on Evaluation of Fatigue Damage in LWR Water
J. Pressure Vessel Technol (February,2007)
Overview of Fatigue Crack Initiation in Carbon and Low-Alloy Steels in Light Water Reactor Environments
J. Pressure Vessel Technol (February,1999)
Related Proceedings Papers
Related Chapters
Lessons Learned: NRC Experience
Continuing and Changing Priorities of the ASME Boiler & Pressure Vessel Codes and Standards
Part 2, Section II—Materials and Specifications
Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 1, Second Edition
Part 2, Section II—Materials and Specifications
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition