The present paper addresses the mechanical characteristics of the stainless steel narrow gap weld (NGW) for the leak-before-break (LBB) application to the main loop piping of a nuclear power plant. Recently, in Korea, the connection with the reactor coolant main loop piping and the steam generator has been welded with ER308L NGW after the replacement of a steam generator of a Korean nuclear power plant. The NGW technique has many merits, for instance, the reduction of construction time and the reduction of shrinkage and deformation after welding due to its small groove angle and welding bead width compared with the conventional welds. In this paper, the tensile and fracture toughness test results of the three ER308L test coupons from NGW were presented and compared with those from conventional welds at the operating condition of the nuclear power plant. In addition, the distribution of the welding residual stress as well as the deformation behavior of the ER308L weld due to NGW was predicted through the nonlinear two-dimensional finite element analysis in which the detailed actual welding process of NGW was simulated. The results presented in this paper can be used to evaluate LBB application to nuclear piping with NGW and to provide the important information to perform the flaw evaluation as well as improve the weld procedure of NGW.
Skip Nav Destination
e-mail: nam-su.huh@snut.ac.kr
Article navigation
April 2011
Research Papers
Estimates of Mechanical Properties and Residual Stress of Narrow Gap Weld for Leak-Before-Break Application to Nuclear Piping
Jun-Seok Yang,
Jun-Seok Yang
Nuclear Power Laboratory,
Korea Electric Power Research Institute
, 65 Munji-ro, Yusung-gu, Daejeon 305-760, Korea
Search for other works by this author on:
Chi-Yong Park,
Chi-Yong Park
Nuclear Power Laboratory,
Korea Electric Power Research Institute
, 65 Munji-ro, Yusung-gu, Daejeon 305-760, Korea
Search for other works by this author on:
Nam-Su Huh
Nam-Su Huh
School of Mechanical Design and Automation Engineering,
e-mail: nam-su.huh@snut.ac.kr
Seoul National University of Technology
, 172 Gongreung 2-dong, Nowon-gu, Seoul 139-743, Korea
Search for other works by this author on:
Jun-Seok Yang
Nuclear Power Laboratory,
Korea Electric Power Research Institute
, 65 Munji-ro, Yusung-gu, Daejeon 305-760, Korea
Chi-Yong Park
Nuclear Power Laboratory,
Korea Electric Power Research Institute
, 65 Munji-ro, Yusung-gu, Daejeon 305-760, Korea
Nam-Su Huh
School of Mechanical Design and Automation Engineering,
Seoul National University of Technology
, 172 Gongreung 2-dong, Nowon-gu, Seoul 139-743, Koreae-mail: nam-su.huh@snut.ac.kr
J. Pressure Vessel Technol. Apr 2011, 133(2): 021403 (7 pages)
Published Online: March 14, 2011
Article history
Received:
January 7, 2010
Revised:
July 6, 2010
Online:
March 14, 2011
Published:
March 14, 2011
Citation
Yang, J., Park, C., and Huh, N. (March 14, 2011). "Estimates of Mechanical Properties and Residual Stress of Narrow Gap Weld for Leak-Before-Break Application to Nuclear Piping." ASME. J. Pressure Vessel Technol. April 2011; 133(2): 021403. https://doi.org/10.1115/1.4002279
Download citation file:
Get Email Alerts
Cited By
The Behaviour of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element models
J. Pressure Vessel Technol
Measurement of Steam-Generator-Tube Vibration Damping Caused by Anti-Vibration-Bar Supports
J. Pressure Vessel Technol (February 2025)
Related Articles
On the Mechanics of Residual Stresses in Girth Welds
J. Pressure Vessel Technol (August,2007)
Numerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels
J. Eng. Mater. Technol (October,2008)
Effect of Ultrasonic Impact Treatment on the Stress Corrosion Cracking of 304 Stainless Steel Welded Joints
J. Pressure Vessel Technol (October,2009)
Microstructural Characterization of Ultrasonically Welded Aluminum
J. Eng. Mater. Technol (January,2005)
Related Proceedings Papers
Related Chapters
Subsection NF—Supports
Companion Guide to the ASME Boiler & Pressure Vessel Codes, Volume 1 Sixth Edition
Subsection NE — Class MC Components
Companion Guide to the ASME Boiler and Pressure Vessel Code, Volume 1, Third Edition
Subsection NE—Class MC Components
Companion Guide to the ASME Boiler & Pressure Vessel Code, Volume 1, Second Edition