Natural gas is relatively clean and its demand is increasing these days. In most of the case, gas fields are located at the bottom of the sea. Therefore, floating production, storage and offloading (FPSO) system is now attracting big attention. This paper is related to dynamical design of FPSO system, specially focused on the free surface elevation in the horizontal cylindrical and axisymmetric liquid vessel with end caps induced by the wave. In this study, the theory on the wave height and resonant frequency in a horizontal cylinder subjected to longitudinal external excitation is developed. Then, the theory capable of taking account of the effect of punching plates is described. Finally, experimental data of resonant wave height up to 3rd mode are shown in comparison with theoretically derived results.
Skip Nav Destination
Article navigation
October 2014
Research-Article
The Effect of Punching Plates to Suppress the Sloshing in a Gas Liquid Separator
Shigehiko Kaneko,
Shigehiko Kaneko
Mem. ASME
Professor
Department of Mechanical Engineering,
Hongo 7-3-1, Bunkyo-ku,
e-mail: kaneko@mech.t.u-tokyo.ac.jp
Professor
Department of Mechanical Engineering,
The University of Tokyo
,Hongo 7-3-1, Bunkyo-ku,
Tokyo 113-8656
, Japan
e-mail: kaneko@mech.t.u-tokyo.ac.jp
Search for other works by this author on:
Hayato Suzuki
Hayato Suzuki
Department of Mechanical Engineering,
Hongo 7-3-1, Bunkyo-ku,
e-mail: hayato2851@gmail.com
The University of Tokyo
,Hongo 7-3-1, Bunkyo-ku,
Tokyo 113-8656
, Japan
e-mail: hayato2851@gmail.com
Search for other works by this author on:
Shigehiko Kaneko
Mem. ASME
Professor
Department of Mechanical Engineering,
Hongo 7-3-1, Bunkyo-ku,
e-mail: kaneko@mech.t.u-tokyo.ac.jp
Professor
Department of Mechanical Engineering,
The University of Tokyo
,Hongo 7-3-1, Bunkyo-ku,
Tokyo 113-8656
, Japan
e-mail: kaneko@mech.t.u-tokyo.ac.jp
Hayato Suzuki
Department of Mechanical Engineering,
Hongo 7-3-1, Bunkyo-ku,
e-mail: hayato2851@gmail.com
The University of Tokyo
,Hongo 7-3-1, Bunkyo-ku,
Tokyo 113-8656
, Japan
e-mail: hayato2851@gmail.com
Contributed by the Pressure Vessel and Piping Division of ASME for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received October 20, 2013; final manuscript received April 17, 2014; published online August 19, 2014. Assoc. Editor: Samir Ziada.
J. Pressure Vessel Technol. Oct 2014, 136(5): 051312 (7 pages)
Published Online: August 19, 2014
Article history
Received:
October 20, 2013
Revision Received:
April 17, 2014
Citation
Kaneko, S., and Suzuki, H. (August 19, 2014). "The Effect of Punching Plates to Suppress the Sloshing in a Gas Liquid Separator." ASME. J. Pressure Vessel Technol. October 2014; 136(5): 051312. https://doi.org/10.1115/1.4027585
Download citation file:
Get Email Alerts
Cited By
Latent Pitfalls in Microstructure-Based Modeling for Thermally Aged 9Cr-1Mo-V Steel (Grade 91)
J. Pressure Vessel Technol
Thermal Stress Analysis of Compact Heat Exchanger Produced by Additive Manufacturing
J. Pressure Vessel Technol
An Improved Model for Predicting Affected Region of Flashing Jet
J. Pressure Vessel Technol
Crack Growth Prediction Based on Uncertain Parameters Using Ensemble Kalman Filter
J. Pressure Vessel Technol
Related Articles
Sloshing Effects in Half-Full Horizontal Cylindrical Vessels Under Longitudinal Excitation
J. Appl. Mech (March,2004)
Motion Control of a Container With Slosh: Constrained Sliding Mode Approach
J. Dyn. Sys., Meas., Control (May,2010)
Finite Element Analysis of Externally-Induced Sloshing in Horizontal-Cylindrical and Axisymmetric Liquid Vessels
J. Pressure Vessel Technol (October,2009)
Nonlinear Free-Surface and Viscous-Internal Sloshing
J. Offshore Mech. Arct. Eng (May,2005)
Related Chapters
Test Methods
Consensus on Operating Practices for the Sampling and Monitoring of Feedwater and Boiler Water Chemistry in Modern Industrial Boilers (CRTD-81)
Temperature Control Machine of Toluene Container in Laminate Coating Process
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Dismantling
Decommissioning Handbook