Abstract
This paper studies the response of ELBOW31 and ELBOW31B element types under pure bending conditions, using shell and beam element models for benchmarking. Various model lengths are evaluated, showing that a model length of six pipe diameters exhibits a hardening effect when total strain exceeds 3.5%, though a strain up to 1% is deemed sufficient for pipeline design. The study examines the effects of ovality modes and boundary conditions such as NOWARP and NOOVAL on the bending response. ELBOW31 with one or two ovality modes yields accurate results, while additional ovality modes or zero ovality mode can lead to overprediction of the elastic bending moment capacity. The introduction of the NOWARP condition enhances the accuracy of the ELBOW31 model, while the NOOVAL condition alone produces unrealistic results. The simplified ELBOW31B model shows good agreement with the ELBOW31-NOWARP model but similarly overpredicts when zero ovality mode is used. The study also finds that Poisson?s ratio and model length have no significant impact on the bending response when no restrictions are applied. Additional analyses, as presented in Appendices A and B, highlight the importance of D/t ratios in pipeline performance. A D/t ratio of 20 offers a stiffer response with reduced ovalization, while a D/t ratio of 50 results in greater flexibility and increased ovalization. These findings provide valuable insights for the selection of element types, boundary conditions, and D/t ratios in robust pipeline design.