Volume 130 Issue 1 | J. Pressure Vessel Technol.

Skip Nav Destination

Editorial

G. E. Otto Widera

J. Pressure Vessel Technol. February 2008, 130(1): 010201. doi: https://doi.org/10.1115/1.2834455

Extract

View articletitled, Editorial

Open the PDF for in another window

Topics: Fluid structure interaction

Research Papers

Design and Analysis

Design by Analysis: Direct Route for Cases With Pressure and Thermal Action

Franz Rauscher

J. Pressure Vessel Technol. February 2008, 130(1): 011201. doi: https://doi.org/10.1115/1.2826407

Abstract

View articletitled, Design by Analysis: Direct Route for Cases With Pressure and Thermal Action

Open the PDF for in another window

Topics: Cycles , Deformation , Design , Pressure , Stress , Temperature , Temperature distribution , Nozzles , Stress concentration

Evaluating Plastic Loads in Torispherical Heads Using a New Criterion of Collapse

Duncan Camilleri, Donald Mackenzie, Robert Hamilton

J. Pressure Vessel Technol. February 2008, 130(1): 011202. doi: https://doi.org/10.1115/1.2826427

Abstract

View articletitled, Evaluating Plastic Loads in Torispherical Heads Using a New Criterion of Collapse

Open the PDF for in another window

Topics: Collapse , Deformation , Stress , Vessels , Work hardening , Pressure vessels

Integrity of Roller-Expanded Tube-to-Tubesheet Joints With Overenlarged Tubesheet Holes

A. N. Shuaib, N. Merah, M. Ahmed, Y. N. Al-Nassar, S. S. Al-Anizi

J. Pressure Vessel Technol. February 2008, 130(1): 011203. doi: https://doi.org/10.1115/1.2826429

Abstract

View articletitled, Integrity of Roller-Expanded Tube-to-Tubesheet Joints With Overenlarged Tubesheet Holes

Open the PDF for in another window

Topics: Clearances (Engineering) , Rollers , Heat exchangers

Proposition of Helical Thread Modeling With Accurate Geometry and Finite Element Analysis

Toshimichi Fukuoka, Masataka Nomura

J. Pressure Vessel Technol. February 2008, 130(1): 011204. doi: https://doi.org/10.1115/1.2826433

Abstract

View articletitled, Proposition of Helical Thread Modeling With Accurate Geometry and Finite Element Analysis

Open the PDF for in another window

Topics: Thread , Geometry , Modeling , Stress , Bolted joints

Finite Element Modeling of a Lightweight Composite Blast Containment Vessel

Mohamed B. Trabia, Brendan J. O’Toole, Jagadeep Thota, Kiran K. Matta

J. Pressure Vessel Technol. February 2008, 130(1): 011205. doi: https://doi.org/10.1115/1.2826437

Abstract

View articletitled, Finite Element Modeling of a Lightweight Composite Blast Containment Vessel

Open the PDF for in another window

Topics: Composite materials , Containment vessels , Finite element analysis , Modeling , Steel , Vessels , Plates (structures)

Magnetostrictive Microactuations and Modal Sensitivities of Thin Magnetoelastic Shells

W. K. Chai, H. S. Tzou, S. M. Arnold, H.-J. Lee

J. Pressure Vessel Technol. February 2008, 130(1): 011206. doi: https://doi.org/10.1115/1.2826451

Abstract

View articletitled, Magnetostrictive Microactuations and Modal Sensitivities of Thin Magnetoelastic Shells

Open the PDF for in another window

Topics: Actuators , Pipes , Shells , Magnetostrictive devices

Plastic Collapse Assessment Procedure for Vessel With Local Thin Area Simultaneously Subjected to Internal Pressure and External Bending Moment

Shinji Konosu, Norihiko Mukaimachi

J. Pressure Vessel Technol. February 2008, 130(1): 011207. doi: https://doi.org/10.1115/1.2827491

Abstract

View articletitled, Plastic Collapse Assessment Procedure for Vessel With Local Thin Area Simultaneously Subjected to Internal Pressure and External Bending Moment

Open the PDF for in another window

Topics: Collapse , Cylinders , Pressure , Stress , Earthquakes , Vessels , Finite element analysis , Buckling , Compression

Residual Thermal Stresses Induced by Local Heat Treatment on Spherical Vessels and Their Influential Factors

Wang Ze-jun, Jing Hong-yang

J. Pressure Vessel Technol. February 2008, 130(1): 011208. doi: https://doi.org/10.1115/1.2826435

Abstract

View articletitled, Residual Thermal Stresses Induced by Local Heat Treatment on Spherical Vessels and Their Influential Factors

Open the PDF for in another window

Topics: Heat treating (Metalworking) , Heating , Temperature , Thermal stresses , Vessels , Cooling , Wall thickness

Thermal Protection Provided by Impact Limiters to a Containment Seal Within a Truck Package

Miles Greiner, Narayana Rao Chalasani, Ahti Suo-Anttila

J. Pressure Vessel Technol. February 2008, 130(1): 011209. doi: https://doi.org/10.1115/1.2826439

Abstract

View articletitled, Thermal Protection Provided by Impact Limiters to a Containment Seal Within a Truck Package

Open the PDF for in another window

Topics: Engineering simulation , Fire , Fuels , Simulation , Temperature , Trucks

Buckling of Externally Pressurized Prolate Ellipsoidal Domes

P. Smith, J. Błachut

J. Pressure Vessel Technol. February 2008, 130(1): 011210. doi: https://doi.org/10.1115/1.2834457

Abstract

View articletitled, Buckling of Externally Pressurized Prolate Ellipsoidal Domes

Open the PDF for in another window

Topics: Buckling , Domes (Structural elements) , Shells , Design , Pressure

A Proposed Model for Creep Relaxation of Soft Gaskets in Bolted Joints at Room Temperature

Ali A. Alkelani, Basil A. Housari, Sayed A. Nassar

J. Pressure Vessel Technol. February 2008, 130(1): 011211. doi: https://doi.org/10.1115/1.2826430

Abstract

View articletitled, A Proposed Model for Creep Relaxation of Soft Gaskets in Bolted Joints at Room Temperature

Open the PDF for in another window

Topics: Aeroelasticity , Gaskets , Creep , Stress

Fluid-Structure Interaction

Correlation Between Vibration Excitation Forces and the Dynamic Characteristics of Two-Phase Cross Flow in a Rotated-Triangular Tube Bundle

C. Zhang, M. J. Pettigrew, N. W. Mureithi

J. Pressure Vessel Technol. February 2008, 130(1): 011301. doi: https://doi.org/10.1115/1.2826381

Abstract

View articletitled, Correlation Between Vibration Excitation Forces and the Dynamic Characteristics of Two-Phase Cross Flow in a Rotated-Triangular Tube Bundle

Open the PDF for in another window

Topics: Cylinders , Drag (Fluid dynamics) , Flow (Dynamics) , Fluctuations (Physics) , Porosity , Probes , Two-phase flow , Vibration , Wakes , Excitation

Coupling of Lattice Boltzmann and Finite Element Methods for Fluid-Structure Interaction Application

Y. W. Kwon

J. Pressure Vessel Technol. February 2008, 130(1): 011302. doi: https://doi.org/10.1115/1.2826405

Abstract

View articletitled, Coupling of Lattice Boltzmann and Finite Element Methods for Fluid-Structure Interaction Application

Open the PDF for in another window

Topics: Finite element methods , Fluid structure interaction , Fluids , Lattice Boltzmann methods , Flow (Dynamics) , Flexible structures , Fluid dynamics

Experimental Investigation of the Location of Maximum Erosive Wear Damage in Elbows

Quamrul H. Mazumder, Siamack A. Shirazi, Brenton McLaury

J. Pressure Vessel Technol. February 2008, 130(1): 011303. doi: https://doi.org/10.1115/1.2826426

Abstract

View articletitled, Experimental Investigation of the Location of Maximum Erosive Wear Damage in Elbows

Open the PDF for in another window

Topics: Damage , Erosion , Flow (Dynamics) , Multiphase flow , Particulate matter , Pipes , Wear , Fluids , Aluminum , Particle collisions

Experimental and Numerical Techniques in Fluids

Franz Durst, Dr.h.c.

J. Pressure Vessel Technol. February 2008, 130(1): 011304. doi: https://doi.org/10.1115/1.2826406

Abstract

View articletitled, Experimental and Numerical Techniques in Fluids

Open the PDF for in another window

Topics: Flow (Dynamics) , Fluid mechanics , Fluid dynamics , Fluids , Turbulence , Heat transfer , Numerical analysis , Particulate matter , Wire

Materials and Fabrication

A New Approach for Bimaterial Interface Fracture Toughness Evaluation

John Jy-An Wang, Ian G. Wright, Michael J. Lance, Ken C. Liu

J. Pressure Vessel Technol. February 2008, 130(1): 011401. doi: https://doi.org/10.1115/1.2826408

Abstract

View articletitled, A New Approach for Bimaterial Interface Fracture Toughness Evaluation

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture toughness , Thin films , Torsion , Stress

Leak Before Break: Studies in Support of New R6 Guidance on Leak Rate Evaluation

J. P. Taggart, P. J. Budden

J. Pressure Vessel Technol. February 2008, 130(1): 011402. doi: https://doi.org/10.1115/1.2826422

Abstract

View articletitled, Leak Before Break: Studies in Support of New R6 Guidance on Leak Rate Evaluation

Open the PDF for in another window

Topics: Flow (Dynamics) , Fracture (Materials) , Leakage , Surface roughness , Friction

A New Technique for Intergranular Crack Formation in Alloy 600 Steam Generator Tubing

Tae Hyun Lee, Il Soon Hwang, Han Sub Chung, Jang Yul Park

J. Pressure Vessel Technol. February 2008, 130(1): 011403. doi: https://doi.org/10.1115/1.2826423

Abstract

View articletitled, A New Technique for Intergranular Crack Formation in Alloy 600 Steam Generator Tubing

Open the PDF for in another window

Topics: Boilers , Finite element analysis , Fracture (Materials) , Tubing

Failure Mode and Failure Strengths for Wall Thinning Straight Pipes and Elbows Subjected to Seismic Loading

Kunio Hasegawa, Katsumasa Miyazaki, Izumi Nakamura

J. Pressure Vessel Technol. February 2008, 130(1): 011404. doi: https://doi.org/10.1115/1.2826425

Abstract

View articletitled, Failure Mode and Failure Strengths for Wall Thinning Straight Pipes and Elbows Subjected to Seismic Loading

Open the PDF for in another window

Topics: Pipes , Stress , Failure mechanisms , Failure

Investigation of Fatigue Crack Propagation in Line Pipes Containing an Angled Surface Flaw

Lichun Bian, Farid Taheri

J. Pressure Vessel Technol. February 2008, 130(1): 011405. doi: https://doi.org/10.1115/1.2826416

Abstract

View articletitled, Investigation of Fatigue Crack Propagation in Line Pipes Containing an Angled Surface Flaw

Open the PDF for in another window

Topics: Density , Fatigue cracks , Fracture (Materials) , Stress , Pipes , Tension

Influence of the Interaction on Stress Intensity Factor of Semielliptical Surface Cracks

Masayuki Kamaya

J. Pressure Vessel Technol. February 2008, 130(1): 011406. doi: https://doi.org/10.1115/1.2826424

Abstract

View articletitled, Influence of the Interaction on Stress Intensity Factor of Semielliptical Surface Cracks

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Surface cracks , Finite element analysis

Nde

Neutron Diffraction Evaluation of Residual Stress for Several Welding Arrangements and Comparison With Fitness-for-Purpose Assessments

Anna M. Pardowska, M.Sc., John W. H. Price, Raafat Ibrahim, Trevor R. Finlayson

J. Pressure Vessel Technol. February 2008, 130(1): 011501. doi: https://doi.org/10.1115/1.2826449

Abstract

View articletitled, Neutron Diffraction Evaluation of Residual Stress for Several Welding Arrangements and Comparison With Fitness-for-Purpose Assessments

Open the PDF for in another window

Topics: Neutron diffraction , Stress , Welding , Yield strength

Technical Briefs

Steady-State Creep Analysis of Thick-Walled Spherical Pressure Vessels With Varying Creep Properties

L. H. You, H. Ou

J. Pressure Vessel Technol. February 2008, 130(1): 014501. doi: https://doi.org/10.1115/1.2826452

Abstract

View articletitled, Steady-State Creep Analysis of Thick-Walled Spherical Pressure Vessels With Varying Creep Properties

Open the PDF for in another window

Topics: Creep , Hoop stress , Pressure , Pressure vessels , Steady state , Stress , Vessels , Iterative methods , Deformation

Burst Analysis of Cylindrical Shells

Liping Xue, G. E. O. Widera, Zhifu Sang

J. Pressure Vessel Technol. February 2008, 130(1): 014502. doi: https://doi.org/10.1115/1.2826454

Abstract

View articletitled, Burst Analysis of Cylindrical Shells

Open the PDF for in another window

Topics: Finite element analysis , Pipes , Pressure

High Pressure Steel Storage Vessels Used in Hydrogen Refueling Station

Jinyang Zheng, Lei Li, Rui Chen, Ping Xu, Fangming Kai

J. Pressure Vessel Technol. February 2008, 130(1): 014503. doi: https://doi.org/10.1115/1.2826453

Abstract

View articletitled, High Pressure Steel Storage Vessels Used in Hydrogen Refueling Station

Open the PDF for in another window

Topics: Hydrogen , Hydrogen storage , Safety , Steel , Vessels , Manufacturing , Hydrogen embrittlement , Storage , High pressure (Physics)

Design Innovation

Minimum Material Design for Propane Cylinder End Closures

Y. Kisioglu, J. R. Brevick, G. L. Kinzel

J. Pressure Vessel Technol. February 2008, 130(1): 015001. doi: https://doi.org/10.1115/1.2826458

Abstract

View articletitled, Minimum Material Design for Propane Cylinder End Closures

Open the PDF for in another window

Topics: Buckling , Cylinders , Design , Finite element analysis , Optimization , Pressure

Prediction of Thermoacoustic Vibration of Burner/Furnace Systems in Utility Boilers

Frantisek L. Eisinger, Robert E. Sullivan

J. Pressure Vessel Technol. February 2008, 130(1): 015002. doi: https://doi.org/10.1115/1.2826459

Abstract

View articletitled, Prediction of Thermoacoustic Vibration of Burner/Furnace Systems in Utility Boilers

Open the PDF for in another window

Topics: Acoustics , Boilers , Furnaces , Stability , Vibration , Oscillations , Sound pressure

Issues

Editorial

Research Papers

Design and Analysis

Fluid-Structure Interaction

Materials and Fabrication

Nde

Technical Briefs

Design Innovation

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only