Skip Nav Destination
Issues
October 2012
ISSN 0094-9930
EISSN 1528-8978
Codes and Standards
High Temperature Design and Damage Evaluation of MOD.9Cr-1Mo Steel Heat Exchanger
J. Pressure Vessel Technol. October 2012, 134(5): 051101.
doi: https://doi.org/10.1115/1.4005938
Topics:
Creep
,
Damage
,
Design
,
Fatigue
,
Finite element analysis
,
Heat exchangers
,
High temperature
,
Sodium
,
Steel
,
Stress
Design and Analysis
Finite Element Study on the Optimization of an Orthotropic Composite Toroidal Shell
J. Pressure Vessel Technol. October 2012, 134(5): 051201.
doi: https://doi.org/10.1115/1.4005873
Topics:
Composite materials
,
Fibers
,
Finite element analysis
,
Finite element model
,
Laminates
,
Optimization
,
Shells
,
Stress
,
Geometry
,
Epoxy adhesives
Implementing Realistic, Nonlinear, Material Stress–Strain Behavior in ANSYS for the Autofrettage of Thick-Walled Cylinders
J. Pressure Vessel Technol. October 2012, 134(5): 051202.
doi: https://doi.org/10.1115/1.4006909
Topics:
Autofrettage
,
Stress
,
Plane strain
,
Finite element analysis
Investigation of Driving Force Variation During Swage Autofrettage, Using Finite Element Analysis
J. Pressure Vessel Technol. October 2012, 134(5): 051203.
doi: https://doi.org/10.1115/1.4006922
Topics:
Autofrettage
,
Deformation
,
Finite element analysis
,
Friction
,
Geometry
,
Stress
,
Modeling
Influence Coefficients of Stress Intensity Factors for Curved Tubing With a Semi-Elliptical Crack
J. Pressure Vessel Technol. October 2012, 134(5): 051204.
doi: https://doi.org/10.1115/1.4006857
Topics:
Autofrettage
,
Fracture (Materials)
,
Stress
,
Tubing
,
Residual stresses
,
Boundary element methods
,
Polynomials
Isochronous Stress–Strain Method With General State of Stress and Variable Loading Conditions for Creep Evaluation
J. Pressure Vessel Technol. October 2012, 134(5): 051205.
doi: https://doi.org/10.1115/1.4007038
Materials and Fabrication
Paris Fatigue Life Modeling of Pressure Vessel Service Simulation Tests
J. Pressure Vessel Technol. October 2012, 134(5): 051401.
doi: https://doi.org/10.1115/1.4006908
Topics:
Autofrettage
,
Fatigue life
,
Pressure vessels
,
Stress
,
Vessels
,
Residual stresses
,
Simulation
,
Modeling
,
Steel
Natural Crack Growth Analyses for Circumferential and Axial PWSCC Defects in Dissimilar Metal Welds
J. Pressure Vessel Technol. October 2012, 134(5): 051402.
doi: https://doi.org/10.1115/1.4007040
Topics:
Fracture (Materials)
,
Stress
Equivalent CTOD Ratio β for Engineering Assessment of CTOD Correction for Constraint Loss
J. Pressure Vessel Technol. October 2012, 134(5): 051403.
doi: https://doi.org/10.1115/1.4006346
Improved Incremental J-Integral Equations for Determining Crack Growth Resistance Curves
J. Pressure Vessel Technol. October 2012, 134(5): 051404.
doi: https://doi.org/10.1115/1.4005945
Topics:
ASTM International
,
Fracture (Materials)
,
Displacement
,
Approximation
,
Stress
NDE
Residual Stress Measurements in an Autofrettage Tube Using Hole Drilling Method
J. Pressure Vessel Technol. October 2012, 134(5): 051501.
doi: https://doi.org/10.1115/1.4007072
Topics:
Autofrettage
,
Stress
,
Drilling
,
Residual stresses
Extracting Quantitative Information on Pipe Wall Damage in Absence of Clear Signals From Defect
J. Pressure Vessel Technol. October 2012, 134(5): 051502.
doi: https://doi.org/10.1115/1.4005877
Topics:
Pipes
,
Signals
,
Wave packets
,
Waves
,
Damage
,
Transducers
Operations, Applications & Components
Statistical Sampling for In-Service Inspection of Underground Storage Tanks (PVP2011-57011)
J. Pressure Vessel Technol. October 2012, 134(5): 051601.
doi: https://doi.org/10.1115/1.4005935
Topics:
Corrosion
,
In-service inspection
,
Inspection
,
Sampling methods
,
Strips
,
Probability
,
Wall thickness
,
Service life (Equipment)
,
Safety
Pipeline Systems
Probabilistic Transgranular Stress Corrosion Cracking Analysis for Oil and Gas Pipelines
J. Pressure Vessel Technol. October 2012, 134(5): 051701.
doi: https://doi.org/10.1115/1.4006125
Topics:
Failure
,
Fracture (Materials)
,
Stress
,
American Petroleum Institute
,
Pipes
,
Design
,
Pipelines
,
Stress corrosion cracking
,
Probability
Optimization of Pipe Repair Sleeve Design
A. F. M. Arif, Yaqoub N. Al-Nassar, Hussain Al-Qahtani, Shafique M. A. Khan, Muhammad Anis, A. M. Eleiche, Muhammad Inam, Nadhir I. Al-Nasri, Hussain M. Al-Muslim
J. Pressure Vessel Technol. October 2012, 134(5): 051702.
doi: https://doi.org/10.1115/1.4006126
Topics:
Maintenance
,
Optimization
,
Pipes
,
Pressure
,
Failure
,
Design
,
Finite element analysis
Seismic Engineering
Sloshing Response of Floating Roofed Liquid Storage Tanks Subjected to Earthquakes of Different Types
J. Pressure Vessel Technol. October 2012, 134(5): 051801.
doi: https://doi.org/10.1115/1.4006858
Topics:
Earthquakes
,
Roofs
,
Sloshing
,
Storage tanks
,
Excitation
,
Stress
Technical Briefs
Review of Corrosion Role in Gas Pipeline and Some Methods for Preventing It
J. Pressure Vessel Technol. October 2012, 134(5): 054501.
doi: https://doi.org/10.1115/1.4006124
Topics:
Cathodic protection
,
Corrosion
,
Pipelines
,
Inspection
A Novel Comparison of Design-by-Analysis Methods
J. Pressure Vessel Technol. October 2012, 134(5): 054502.
doi: https://doi.org/10.1115/1.4006343
An Empirical Formula for Stress Intensity Factors of Double Edge Half-Circular-Hole Cracks in a Rectangular Sheet in Tension
J. Pressure Vessel Technol. October 2012, 134(5): 054503.
doi: https://doi.org/10.1115/1.4005936
Topics:
Fracture (Materials)
,
Stress
,
Tension
Fuel Power Density
J. Pressure Vessel Technol. October 2012, 134(5): 054504.
doi: https://doi.org/10.1115/1.4006906
Topics:
Fuels
,
Pipelines
,
Power density
,
Density
Email alerts
RSS Feeds
Vorticity Shedding and Acoustic Resonance Excitation of a Square Tube Array: Effect of Flow Approach Angle
J. Pressure Vessel Technol
Optimization of Composite Cylindrical Shell Structures for Hydrostatic Pressure Loading
J. Pressure Vessel Technol
Interpolated Moduli Adjustment Technique for Limit Loads
J. Pressure Vessel Technol
Removal of Cavitation Using HDPE/LDPE Inline Section-Pipe
J. Pressure Vessel Technol
